Overview
The Volvo Construction Equipment Volvo G940 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 107.0 gal and hydraulic capacity of 24.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Volvo Construction Equipment Volvo G940 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
36,150
lb
Max Power
225
hp
Moldboard Width
12
ft
Overall Length
30
ft
Full Specifications
56 specs
Dimensions
Blade Base
8.70 in / 221 mm
Front Ground Clearance
2 ft / 0.61 m
Height To Top Of Isomount Cab
10.59 ft / 3.23 m
Overall Length
30 ft / 9.14 m
Wheelbase
20.43 ft / 6.23 m
Width Over Tires
8.25 ft / 2.51 m
Engine
Alternator Supplied Amperage
80 A
Blade Down Pressure
17,895 lb / 8,117 kg
Blade Pull At Max Weight
28,260 lb / 12,819 kg
Cooling System Fluid Capacity
8.20 gal / 31.0 L
Displacement
436 cu in / 7.1 L
Engine Make
2244
Engine Model
D7E
Fuel Capacity
107 gal / 405.0 L
Ground Clearance
2 ft / 0.61 m
Hydraulic System Fluid Capacity
24 gal / 90.8 L
Max Depth Of Cut
31 ft / 9.45 m
Max Operation Weight - Front Axle
16,700 lb / 7,575 kg
Max Operation Weight - Rear Axle
31,400 lb / 14,243 kg
Max Operation Weight - Total
47,000 lb / 21,319 kg
Max Power
225 hp / 167.8 kW
Max Speed - Forward
28.40 mph / 45.7 km/h
Max Speed - Reverse
20 mph / 32.2 km/h
Moldboard Height
25 in / 635 mm
Moldboard Thickness
0.90 in / 23 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gears 7-8
225 hp / 167.8 kW
Net Torque Gears 7-8
754 lb-ft / 1,022 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
5.70 gal / 21.6 L
Operating Voltage
24 V
Oscillation - Total
16 deg
Power Measured @
1,800 rpm
Pump Flow
55 gal/min / 208.2 L/min
Relief Valve Pressure
3,000 psi / 206.8 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
10,360 lb / 4,699 kg
Std Operation Weight - Rear Axle
25,790 lb / 11,698 kg
Std Operation Weight - Total
36,150 lb / 16,397 kg
Tandem Case Fluid Capacity (Each)
26.40 gal / 99.9 L
Torque Measured @
1,550 rpm
Transmission Fluid Capacity
16 gal / 60.6 L
Transmission Type
HTE840, Fully sequential, direct drive, Volvo powershift transmission
Turning Radius
23.90 ft / 7.28 m
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
45 deg
Blade Tip Angle - Rear
6 deg
Diameter
64 in / 1,626 mm
Max Reach Outside Tires - Left
80 ft / 24.38 m
Max Reach Outside Tires - Right
79 ft / 24.08 m
Rotation
360 deg
Shift Left
30.50 in / 775 mm
Shift Right
29.50 in / 749 mm
Related Machines
Frequently Asked Questions
How does the Volvo Construction Equipment Volvo G940 compare to similar Motor Grader models? +
You can compare the Volvo Construction Equipment Volvo G940 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.