Overview
The Volvo Construction Equipment Volvo G976 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 132.0 gal and hydraulic capacity of 38.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Volvo Construction Equipment Volvo G976 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
43,650
lb
Max Power
262
hp
Moldboard Width
12
ft
Overall Length
31.08
ft
Full Specifications
56 specs
Dimensions
Blade Base
9.08 in / 231 mm
Height To Top Of Isomount Cab
10.42 ft / 3.18 m
Overall Length
31.08 ft / 9.47 m
Wheelbase
21.33 ft / 6.50 m
Width Over Tires
9.08 ft / 2.77 m
Engine
Alternator Supplied Amperage
80 A
Articulation Angle
21 deg
Blade Down Pressure
21,574 lb / 9,786 kg
Blade Pull At Max Weight
40,000 lb / 18,144 kg
Cooling System Fluid Capacity
12.40 gal / 46.9 L
Displacement
573 cu in / 9.4 L
Engine Make
2244
Engine Model
D9B
Fuel Capacity
132 gal / 499.7 L
Ground Clearance
23.20 ft / 7.07 m
Hydraulic System Fluid Capacity
38 gal / 143.8 L
Max Depth Of Cut
30.50 ft / 9.30 m
Max Operation Weight - Front Axle
18,500 lb / 8,391 kg
Max Operation Weight - Rear Axle
35,000 lb / 15,876 kg
Max Operation Weight - Total
51,500 lb / 23,360 kg
Max Power
262 hp / 195.4 kW
Max Speed - Forward
27.40 mph / 44.1 km/h
Max Speed - Reverse
19.30 mph / 31.1 km/h
Moldboard Height
29.10 in / 739 mm
Moldboard Thickness
1 in / 25 mm
Moldboard Width
12 ft / 3.66 m
Net Power Gears 7-8
262 hp / 195.4 kW
Net Torque Gears 7-8
876 lb-ft / 1,188 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
10.40 gal / 39.4 L
Operating Voltage
24 V
Oscillation - Total
16 deg
Power Measured @
1,700 rpm
Pump Flow
55 gal/min / 208.2 L/min
Relief Valve Pressure
3,000 psi / 206.8 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
12,340 lb / 5,597 kg
Std Operation Weight - Rear Axle
31,310 lb / 14,202 kg
Std Operation Weight - Total
43,650 lb / 19,799 kg
Tandem Case Fluid Capacity (Each)
26.40 gal / 99.9 L
Torque Measured @
1,550 rpm
Transmission Fluid Capacity
16 gal / 60.6 L
Transmission Type
HTE 840, Fully sequential, direct drive, Volvo powershift transmission
Turning Radius
25.10 ft / 7.65 m
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
45 deg
Blade Tip Angle - Rear
6 deg
Diameter
64 in / 1,626 mm
Max Reach Outside Tires - Left
78 ft / 23.77 m
Max Reach Outside Tires - Right
77 ft / 23.47 m
Rotation
360 deg
Shift Left
30.50 in / 775 mm
Shift Right
29.50 in / 749 mm
Related Machines
Frequently Asked Questions
How does the Volvo Construction Equipment Volvo G976 compare to similar Motor Grader models? +
You can compare the Volvo Construction Equipment Volvo G976 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.