Overview
The Volvo Construction Equipment Volvo G990 is a motor grader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include fuel capacity of 132.0 gal and hydraulic capacity of 24.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Volvo Construction Equipment Volvo G990 against similar motor grader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Std Operation Weight - Total
48,720
lb
Max Power
277
hp
Moldboard Width
14
ft
Overall Length
31.75
ft
Full Specifications
56 specs
Dimensions
Blade Base
9.50 in / 241 mm
Height To Top Of Isomount Cab
10.58 ft / 3.22 m
Overall Length
31.75 ft / 9.68 m
Wheelbase
21.75 ft / 6.63 m
Width Over Tires
9.08 ft / 2.77 m
Engine
Alternator Supplied Amperage
80 A
Articulation Angle
21 deg
Blade Down Pressure
24,457 lb / 11,094 kg
Blade Pull At Max Weight
37,800 lb / 17,146 kg
Cooling System Fluid Capacity
12.40 gal / 46.9 L
Displacement
573 cu in / 9.4 L
Engine Make
2244
Engine Model
D9B
Fuel Capacity
132 gal / 499.7 L
Ground Clearance
24.20 ft / 7.38 m
Hydraulic System Fluid Capacity
24 gal / 90.8 L
Max Depth Of Cut
32.50 ft / 9.91 m
Max Operation Weight - Front Axle
18,500 lb / 8,391 kg
Max Operation Weight - Rear Axle
42,000 lb / 19,051 kg
Max Operation Weight - Total
60,000 lb / 27,216 kg
Max Power
277 hp / 206.6 kW
Max Speed - Forward
28.10 mph / 45.2 km/h
Max Speed - Reverse
19.80 mph / 31.9 km/h
Moldboard Height
31 in / 787 mm
Moldboard Thickness
1 in / 25 mm
Moldboard Width
14 ft / 4.27 m
Net Power Gears 7-8
277 hp / 206.6 kW
Net Torque Gears 7-8
929 lb-ft / 1,260 Nm
Number Of Gears - Forward
8
Number Of Gears - Reverse
4
Number of Cylinders
6
Oil System Fluid Capacity
10.40 gal / 39.4 L
Operating Voltage
24 V
Oscillation - Total
16 deg
Power Measured @
1,700 rpm
Pump Flow
55 gal/min / 208.2 L/min
Relief Valve Pressure
3,000 psi / 206.8 bar
Side Shift Left
26.50 in / 673 mm
Side Shift Right
26.50 in / 673 mm
Std Operation Weight - Front Axle
13,670 lb / 6,201 kg
Std Operation Weight - Rear Axle
35,050 lb / 15,898 kg
Std Operation Weight - Total
48,720 lb / 22,099 kg
Tandem Case Fluid Capacity (Each)
27.70 gal / 104.9 L
Torque Measured @
1,550 rpm
Transmission Fluid Capacity
16 gal / 60.6 L
Transmission Type
HTE 840, Fully sequential, direct drive, Volvo powershift transmission
Turning Radius
26.80 ft / 8.17 m
Wheel Lean
18 deg
Hydraulics
Blade Tip Angle - Front
46 deg
Blade Tip Angle - Rear
13 deg
Diameter
64 in / 1,626 mm
Max Reach Outside Tires - Left
89 ft / 27.13 m
Max Reach Outside Tires - Right
89 ft / 27.13 m
Rotation
360 deg
Shift Left
30 in / 762 mm
Shift Right
29.50 in / 749 mm
Related Machines
Frequently Asked Questions
How does the Volvo Construction Equipment Volvo G990 compare to similar Motor Grader models? +
You can compare the Volvo Construction Equipment Volvo G990 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.