Versatile tractor loader backhoes for municipal utilities, pipe laying, and general excavation.
Backhoe loaders are bought for flexibility, so specs need to cover both ends of the machine: loader bucket capacity, lift performance, backhoe dig depth, stabilizer setup, hydraulic flow, and roading behavior.
Use this category hub for municipal utility work, trenching, small site prep, pipe work, and owner-operator comparisons where one machine replaces several smaller tools.
Only published, source-checked model pages are listed here. Temporary filtered URLs stay separate from this canonical category hub.
CASE 580 Super N WT backhoe loader specs: 110 hp class power, about 20,000 lb operating weight class, 18 ft backhoe digging-depth class, and utility fleet cost notes.
John Deere 310 P-Tier backhoe loader specs: 100 hp net peak power, 16,217 lb operating weight, 13 ft 8 in standard dipperstick dig depth, 1.13 yd3 standard loader bucket, and 28 gpm hydraulic pump flow.
JCB 3CX backhoe loader specs: 74 hp engine rating, 17,073 lb operating weight, 18 ft 6 in max dig depth, 1.3-1.4 yd3 shovel options, 44 gpm pump flow, and 500-hour service intervals.
Maintenance, troubleshooting, operating cost, comparison, and seasonal pages connected to this equipment class.
Choose a backhoe loader by dig depth, reach, standard or extendable dipper, stabilizer footprint, loader lift, hydraulic flow, roading needs, bucket match and jobsite access.
Estimate backhoe loader cost per hour by separating fuel burn, tires, brakes, stabilizer pads, loader and backhoe pins, bucket teeth, hydraulic service, roading, downtime and ownership.
Troubleshoot backhoe loader slow boom, weak loader curl, stabilizer drift, hydraulic heat, pump noise, brake drag, roading vibration, steering pull and attachment complaints.
A practical 500-hour backhoe loader maintenance checklist for loader linkage, backhoe boom and dipper pins, stabilizers, tires, brakes, hydraulic oil, filters, cooling and roading records.
A cold-start checklist for excavators, dozers, wheel loaders, and backhoes covering winter fuel, fuel gelling, filters, engine oil weight, coolant freeze point, batteries, block heaters, glow plugs, DEF, and safe cranking limits.
A CASE 580 Super N WT maintenance checklist for brakes, stabilizers, loader pins, backhoe boom, hydraulic leaks, tires, cooling, filters and service records.
A CASE 580 Super N WT troubleshooting workflow for brake pull, roading vibration, stabilizer drift, hydraulic leaks, backhoe instability and loader-end wear.
Estimate CASE 580 Super N WT operating cost per hour with fuel burn, tires, brakes, stabilizers, loader pins, backhoe wear, transport and ownership.
Compare CASE 580 Super N WT, JCB 3CX and John Deere 310 P-Tier backhoe loaders by dig depth, roading, loader work, stabilizers, brakes, tires and ownership fit.
