CASE Construction Equipment · Multi Terrain Loader

CASE 420CT Series 3 Multi Terrain Loader Specs

/5 · ratings Be the first to rate ✓ Thanks!

CASE Const...

Overview

The CASE Construction Equipment Case 420CT Series 3 Multi Terrain Loader is a multi terrain loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 69 hp, operating weight of 8,340 lb, capacity of 0.6 yd³, fuel capacity of 22.0 gal and hydraulic capacity of 13.2 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 420CT Series 3 Multi Terrain Loader against similar multi terrain loader models by power, weight, capacity, dimensions, speed, and other technical values.

Key Specifications

Operating Weight
8,340
lb

Net Power
69
hp

Gross Power
74
hp

Bucket Capacity
0.60
yd3

Full Specifications

36 specs

Dimensions

Clearance At Max Lift And Dump 7.94 ft / 2.42 m

Ground Clearance 8.39 ft / 2.56 m

Height to Top of Cab 6.63 ft / 2.02 m

Length With Bucket 10.80 ft / 3.29 m

Length With Out Bucket 8.54 ft / 2.60 m

Length of Track on Ground 4.72 ft / 1.44 m

Reach At Max Lift And Dump 2.07 ft / 0.63 m

Turning Radius From Center - Inc Bucket 80.71 ft / 24.60 m

Turning Radius From Center - Machine Rear 57.09 ft / 17.40 m

Width Over Tracks 5.42 ft / 1.65 m

Engine

Alternator Supplied Amperage 95 A

Bucket Capacity 0.60 yd³ / 0.46 m³

Cooling System Fluid Capacity 3.10 gal / 11.7 L

Displacement 195 cu in / 3.2 L

Engine Make 2239

Engine Model 432T/M3

Engine Oil Capacity 2.30 gal / 8.7 L

Fuel Capacity 22 gal / 83.3 L

Gross Power 74 hp / 55.2 kW

Hydraulic System Fluid Capacity 13.20 gal / 50.0 L

Max Speed - High Range 8.40 mph / 13.5 km/h

Max Speed - Low Range 5.80 mph / 9.3 km/h

Net Power 69 hp / 51.5 kW

Number of Cylinders 4

Operating Load 2,860 lb / 1,297 kg

Operating Voltage 12 V

Operating Weight 8,340 lb / 3,783 kg

Peak Torque 203 lb-ft / 275 Nm

Power Measured @ 2,500 rpm

Pump Flow 23.80 gal/min / 90.1 L/min

Tipping Angle 5,715 deg

Torque Measured @ 1,400 rpm

Undercarriage

Ground Contact Area 1,424 in² / 9,187.1 cm²

Ground Pressure 6 psi / 0.4 bar

Number of Track Rollers per Side 3

Width Of Track 12.60 ft / 3.84 m

Related Machines

Caterpillar

297C Multi Terrain Loader

Caterpillar

287C Multi Terrain Loader

Caterpillar

299C Multi Terrain Loader

Caterpillar

289C Multi Terrain Loader

Caterpillar

259B Series 3 Multi Terrain Loader

Caterpillar

279C Multi Terrain Loader

Frequently Asked Questions

What is the operating weight of the CASE Construction Equipment Case 420CT Series 3 Multi Terrain Loader? +

The CASE Construction Equipment Case 420CT Series 3 Multi Terrain Loader has an operating weight of 8,340 lb (3,783 kg). This places it in a class suited for multi terrain loader applications where ground pressure and transport weight are key considerations.

How powerful is the CASE Construction Equipment Case 420CT Series 3 Multi Terrain Loader engine? +

The CASE Construction Equipment Case 420CT Series 3 Multi Terrain Loader produces 74 hp (55.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Multi Terrain Loader work cycles efficiently.

How does the CASE Construction Equipment Case 420CT Series 3 Multi Terrain Loader compare to similar Multi Terrain Loader models? +

You can compare the CASE Construction Equipment Case 420CT Series 3 Multi Terrain Loader side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.