Overview
The Caterpillar 325C MH Material Handler is a material handler listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 173 hp, operating weight of 76,350 lb, reach of 42.79 ft, travel speed of 3.2 mph, fuel capacity of 132.1 gal and hydraulic capacity of 81.9 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 325C MH Material Handler against similar material handler models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
76,350
lb
Net Power
173
hp
Full Specifications
94 specs
Dimensions
Counterweight Clearance
4.10 ft / 1.25 m
Gauge
133.60 in / 3,393 mm
Ground Clearance
1.70 ft / 0.52 m
Height - Top Of Exhaust
9.50 ft / 2.90 m
Height To Top Of Cab - Fixed Riser
11.13 ft / 3.39 m
Height To Top Of Cab - Hydraulic Riser Raised
15.06 ft / 4.59 m
Length of Track on Ground
12.50 ft / 3.81 m
Max Depth
21 ft / 6.40 m
Max Height
45.05 in / 1,144 mm
Max Reach Along Ground
42.79 ft / 13.04 m
Maximum Reach
50.90 ft / 15.51 m
Number Of Carrier Rollers - Each Side
2
Operating Height - To Top Of Cab (Fixed)
16.70 ft / 5.09 m
Operating Width
13.90 ft / 4.24 m
Overall Track Length
15.30 ft / 4.66 m
Rear - Carrier To Tipped Cab
26.50
Rollers - Each Side
9
Shipping Height
11.65 ft / 3.55 m
Shipping Height - Cab Tipped
10.20 ft / 3.11 m
Shipping Length
39.10 ft / 11.92 m
Shipping Width
13.90 ft / 4.24 m
Shoes Per Side
48
Stick Length
24.40 ft / 7.44 m
Tail Swing Radius
9.81 ft / 2.99 m
Track Shoes
24 in / 610 mm
Uc With Standard Shoe Width
13.94 ft / 4.25 m
Undercarriage Width
12.21 ft / 3.72 m
Upperstructure Clearance
4.38 ft / 1.34 m
Engine
Alternator Supplied Amperage
65 A
Bore
4.40 in / 112 mm
Cat 3126B ATAAC HEUI
Net Power - Eec 80/1269
Cooling System Fluid Capacity
8 gal / 30.3 L
Counterweight
17,850 lb / 8,097 kg
Counterweight Weight
0 lb / 0 kg
Derating Altitude
7,546
Displacement
440 cu in / 7.2 L
Engine Make
2236
Engine Model
3126B ATAAC
Engine Oil Capacity
9 gal / 34.1 L
Fuel Capacity
132.10 gal / 500.1 L
Fuel Tank
132 gal / 499.7 L
High Range Maximum Travel Speed
3.10 mph / 5.0 km/h
Hydraulic System Fluid Capacity
81.90 gal / 310.0 L
Hydraulic Tank
38 gal / 143.8 L
Low Range Maximum Travel Speed
1.90 mph / 3.1 km/h
Max Drawbar Pull
53,091 lb / 24,082 kg
Max Speed
3.20 mph / 5.1 km/h
Maximum Gradeability
70 %
Net Flywheel Power
188 hp / 140.2 kW
Net Power
173 hp / 129.0 kW
Net Power - Eec 80/1269
188 hp / 140.2 kW
Net Power - Iso 9249
188 hp / 140.2 kW
Net Power - Sae J1349
186 hp / 138.7 kW
Number of Forward Gears
2
Number of Reverse Gears
2
Operating Weight
76,350 lb / 34,632 kg
Operating Weight W/O Attachment
73,745 lb / 33,450 kg
Power Measured @
1,800 rpm
Pump Capacity
124.20 gal/min / 470.1 L/min
Relief Pressure
4,975 psi / 343.0 bar
Stroke
5 in / 127 mm
Swing Drive
2.60 deg
Swing Speed
10.20 deg
Swing Torque
60,628 deg
Travel Speed
3.20 mph / 5.1 km/h
Two-Piece Front - With Cylinders
14,294
Undercarriage - Including Carbody
24,214
Upper
19,553
Hydraulics
Engine Oil
9 gal / 34.1 L
Generator Auxiliary Pump Maximum Flow
44 gal/min / 166.6 L/min
Generator Auxiliary Pump Maximum Pressure
2,500 psi / 172.4 bar
Main Pumps Number
2
Maximum Flow - Each Of Two Pumps
62 gal/min / 234.7 L/min
Maximum Pressure - Implements
4,850 psi / 334.4 bar
Maximum Pressure - Swing
3,988 psi / 275.0 bar
Maximum Pressure - Travel
4,850 psi / 334.4 bar
Pilot System - Maximum Flow
10 gal/min / 37.9 L/min
Pilot System - Maximum Pressure
597 psi / 41.2 bar
Rotate Circuit For Grapple Maximum Flow
15 gal/min / 56.8 L/min
Rotate Circuit For Grapple Operating Pressure
2,000 psi / 137.9 bar
Other
Cab Riser - Fixed
6.50
Cat 2-Piece Mh Linkage Arrangement
50.9
Front Lift Capacity (Max)
26,235 lb / 11,900 kg
Generator Set
20.10
Ground Level Lift At Radius
19.70 ft / 6.00 m
Maximum Reach - Below Ground
24.70 ft / 7.53 m
Side Lift Capacity (Max)
22,928 lb / 10,400 kg
Cooling System
7.90 gal / 29.9 L
Final Drive - Each
1.6
Hydraulic System - Including Tank
82 gal / 310.4 L
Maximum Drawbar Pull
54,853 lb / 24,881 kg
Net Power
173 hp / 129.0 kW
Undercarriage
Shoe Size
31.50 in / 800 mm
Track Gauge
9.60 ft / 2.93 m
Frequently Asked Questions
What is the operating weight of the Caterpillar 325C MH Material Handler? +
The Caterpillar 325C MH Material Handler has an operating weight of 76,350 lb (34,632 kg). This places it in a class suited for material handler applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 325C MH Material Handler engine? +
The Caterpillar 325C MH Material Handler produces 188 hp (140.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Material Handler work cycles efficiently.
What is the maximum reach of the Caterpillar 325C MH Material Handler? +
The Caterpillar 325C MH Material Handler has a maximum reach along the ground of 42.79 ft (13.04 m), allowing it to work effectively across wide areas without repositioning.
What is the travel speed of the Caterpillar 325C MH Material Handler? +
The Caterpillar 325C MH Material Handler has a maximum travel speed of 3.2 mph (5.1 km/h), enabling efficient movement between work areas on the job site.
How does the Caterpillar 325C MH Material Handler compare to similar Material Handler models? +
You can compare the Caterpillar 325C MH Material Handler side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.