Overview
The Caterpillar 330C MH Material Handler is a material handler listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 247 hp, operating weight of 96,595 lb, reach of 46.23 ft, travel speed of 3.2 mph, fuel capacity of 163.3 gal and hydraulic capacity of 108.4 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 330C MH Material Handler against similar material handler models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
96,595
lb
Net Power
247
hp
Gross Power
264
hp
Full Specifications
90 specs
Dimensions
Counterweight Clearance
4 ft / 1.22 m
Gauge
141.70 in / 3,599 mm
Ground Clearance
1.70 ft / 0.52 m
Height - Top Of Exhaust
9.50 ft / 2.90 m
Height To Top Of Cab - Fixed Riser
16.87 ft / 5.14 m
Length of Track on Ground
13.30 ft / 4.05 m
Max Depth
47.31 ft / 14.42 m
Max Height
24.92 ft / 7.60 m
Max Reach Along Ground
46.23 ft / 14.09 m
Maximum Reach
52.20 ft / 15.91 m
Number Of Carrier Rollers - Each Side
2
Operating Height - To Top Of Cab (Fixed)
16.70 ft / 5.09 m
Operating Width
14.30 ft / 4.36 m
Overall Track Length
16.50 ft / 5.03 m
Rear - Carrier To Tipped Cab
28
Rollers - Each Side
9
Shipping Height
11.62 ft / 3.54 m
Shipping Height - Cab Tipped
10.40 ft / 3.17 m
Shipping Length
41.80 in / 1,062 mm
Shipping Width
14 ft / 4.27 m
Shoes Per Side
49
Stick Length
25 ft / 7.62 m
Tail Swing Radius
11.50 ft / 3.51 m
Track Shoes
24 in / 610 mm
Uc With Standard Shoe Width
14.35 ft / 4.37 m
Undercarriage Width
14.28 ft / 4.35 m
Upperstructure Clearance
4.86 ft / 1.48 m
Engine
Bore
4.50 in / 114 mm
Cat C-9
Net Power - Eec 80/1269
Cooling System Fluid Capacity
9.30 gal / 35.2 L
Counterweight
18,300 lb / 8,301 kg
Counterweight Weight
0 lb / 0 kg
Derating Altitude
7,546
Displacement
537 cu in / 8.8 L
Engine Make
2236
Engine Model
C-9 ATAAC
Engine Oil Capacity
9.40 gal / 35.6 L
Fuel Capacity
163.30 gal / 618.2 L
Fuel Tank
163 gal / 617.0 L
Gross Power
264 hp / 196.9 kW
High Range Maximum Travel Speed
3.10 mph / 5.0 km/h
Hydraulic System Fluid Capacity
108.40 gal / 410.3 L
Hydraulic Tank
46 gal / 174.1 L
Low Range Maximum Travel Speed
2.10 mph / 3.4 km/h
Max Drawbar Pull
66,139 lb / 30,000 kg
Max Speed
3.20 mph / 5.1 km/h
Maximum Gradeability
70 %
Net Flywheel Power
247 hp / 184.2 kW
Net Power
243 hp / 181.2 kW
Net Power - Eec 80/1269
247 hp / 184.2 kW
Net Power - Iso 9249
247 hp / 184.2 kW
Net Power - Sae J1349
244 hp / 182.0 kW
Number of Forward Gears
2
Number of Reverse Gears
2
Operating Weight
96,595 lb / 43,815 kg
Operating Weight W/O Attachment
97,004 lb / 44,000 kg
Power Measured @
1,800 rpm
Pump Capacity
148 gal/min / 560.2 L/min
Relief Pressure
4,975 psi / 343.0 bar
Stroke
5.90 in / 150 mm
Swing Drive
5 deg
Swing Speed
10 deg
Swing Torque
79,657 deg
Travel Speed
3.20 mph / 5.1 km/h
Hydraulics
Engine Oil
9.40 gal / 35.6 L
Generator Auxiliary Pump Maximum Flow
42 gal/min / 159.0 L/min
Generator Auxiliary Pump Maximum Pressure
2,500 psi / 172.4 bar
Main Pumps Number
2
Maximum Flow - Each Of Two Pumps
74 gal/min / 280.1 L/min
Maximum Pressure - Implements
4,900 psi / 337.8 bar
Maximum Pressure - Swing
4,046 psi / 279.0 bar
Maximum Pressure - Travel
4,900 psi / 337.8 bar
Pilot System - Maximum Flow
10 gal/min / 37.9 L/min
Pilot System - Maximum Pressure
597 psi / 41.2 bar
Rotate Circuit For Grapple Maximum Flow
13 gal/min / 49.2 L/min
Rotate Circuit For Grapple Operating Pressure
2,000 psi / 137.9 bar
Other
Cab Riser - Fixed
6.40
Cat 2-Piece Mh Linkage Arrangement
52.2
Front Lift Capacity (Max)
34,833 lb / 15,800 kg
Generator Set
26.80
Ground Level Lift At Radius
19.70 ft / 6.00 m
Maximum Reach - Below Ground
23 ft / 7.01 m
Side Lift Capacity (Max)
31,306 lb / 14,200 kg
Cooling System
10 gal / 37.9 L
Final Drive - Each
4
Hydraulic System - Including Tank
108 gal / 408.8 L
Maximum Drawbar Pull
66,094 lb / 29,980 kg
Net Power
247 hp / 184.2 kW
Undercarriage
Shoe Size
29.60 in / 752 mm
Track Gauge
11.90 ft / 3.63 m
Frequently Asked Questions
What is the operating weight of the Caterpillar 330C MH Material Handler? +
The Caterpillar 330C MH Material Handler has an operating weight of 96,595 lb (43,815 kg). This places it in a class suited for material handler applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 330C MH Material Handler engine? +
The Caterpillar 330C MH Material Handler produces 264 hp (196.9 kW) of engine power. This output is typical for its weight class and designed to handle demanding Material Handler work cycles efficiently.
What is the maximum reach of the Caterpillar 330C MH Material Handler? +
The Caterpillar 330C MH Material Handler has a maximum reach along the ground of 46.23 ft (14.09 m), allowing it to work effectively across wide areas without repositioning.
What is the travel speed of the Caterpillar 330C MH Material Handler? +
The Caterpillar 330C MH Material Handler has a maximum travel speed of 3.2 mph (5.1 km/h), enabling efficient movement between work areas on the job site.
How does the Caterpillar 330C MH Material Handler compare to similar Material Handler models? +
You can compare the Caterpillar 330C MH Material Handler side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.