Overview
The Caterpillar 928Gz is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 145 hp, operating weight of 27,135 lb, fuel capacity of 59.5 gal and hydraulic capacity of 33.1 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the Caterpillar 928Gz against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
27,134.50
lb
Net Power
144.90
hp
Gross Power
135
hp
Bucket Capacity - Heaped
2.62
yd3
Full Specifications
111 specs
Dimensions
Breakout Force
25,844 lb / 11,723 kg
Bucket Capacity - Heaped
2.62 yd³ / 2.00 m³
Bucket Capacity - Struck
2.23 yd³ / 1.70 m³
Bucket Clearance-Maximum Lift/Carry
12.40 ft / 3.78 m
Bucket Pin Height - Maximum Lift
12.40 ft / 3.78 m
Bucket Width
8.37 ft / 2.55 m
Carry Height
3 ft / 0.91 m
Centerline Of Front Axle To Hitch
4.91 in / 125 mm
Digging Depth
3.40 ft / 1.04 m
Dump Angle At Maximum Lift
45 deg
Dump Clearance At Max Raise
9.45 ft / 2.88 m
Dump Clearance At Maximum Lift - 45 Degrees
9.50 ft / 2.90 m
Ground Clearance
1.40 ft / 0.43 m
Height - Center Of Axle
2.30 ft / 0.70 m
Height - Top Of Exhaust Stack
10.60 ft / 3.23 m
Height - Top Of Hood
87.60 in / 2,225 mm
Height - Top Of Rops/Fops
10.80 ft / 3.29 m
Height to Top of Cab
10.73 ft / 3.27 m
Hinge Pin - Max Height
12.71 ft / 3.87 m
Length - Rear Axle To Bumper
6.40 ft / 1.95 m
Length With Bucket On Ground
23.80 ft / 7.25 m
Overall Height
16.40 ft / 5.00 m
Overall Height - Bucket Raised
16.40 ft / 5.00 m
Overall Length
23.10 ft / 7.04 m
Rack Back Angle - Carry
47.80 deg
Rack Back Angle - Ground
44 deg
Rack Back Angle - Maximum Lift
58 deg
Reach At Max Lift And Dump
9.45 ft / 2.88 m
Reach At Maximum Lift And 45 Degrees Dump
3 ft / 0.91 m
Tread Width
96 in / 2,438 mm
Wheel Base
9.60 in / 244 mm
Wheel Base Length
9.60 ft / 2.93 m
Wheelbase
9.52 ft / 2.90 m
Width - Over Tires
6.40 ft / 1.95 m
Width Over Tires
8.22 ft / 2.51 m
Engine
Alternator Supplied Amperage
80 A
Articulation Angle
40 deg
Axle Oscillation
11 lb / 5 kg
Bore
4 in / 102 mm
Breakout Force - Reference Bucket
25,844 lb / 11,723 kg
Capacity - Reference Bucket
2.70
Cooling System Fluid Capacity
11.10 gal / 42.0 L
Displacement
366 cu in / 6.0 L
Eec 80/1269 (1)
145
Eec 80/1269 (2)
156
Engine Make
2236
Engine Model
3056E DIT ATAAC
Engine Oil Fluid Capacity
4.30 gal / 16.3 L
Forward - 1
4.90 mph / 7.9 km/h
Front
6.9
Front Axle/Diff Fluid Capacity
6.90 gal / 26.1 L
Fuel Capacity
59.50 gal / 225.2 L
Fuel Tank
59.40 gal / 224.9 L
Gross Power
157 hp / 117.0 kW
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)
27 gal/min / 102.2 L/min
Hydraulic System Fluid Capacity
33.10 gal / 125.3 L
Hydraulic Tank
18.50 gal / 70.0 L
Iso 9249 (1997) (1)
145
Iso 9249 (1997) (2)
156
Max Speed - Forward
23.70 mph / 38.1 km/h
Max Speed - Reverse
16.20 mph / 26.1 km/h
Maximum Net Power - 2000 Rpm
155 hp / 115.6 kW
Maximum Working Pressure
3,000 psi / 206.8 bar
Minimum Turning Radius - Over Tires
206 ft / 62.79 m
Net Power
145 hp / 108.1 kW
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
27,135 lb / 12,308 kg
Optional Counterweight
655 lb / 297 kg
Power Measured @
2,300 rpm
Rated Net Power
143 hp / 106.6 kW
Rear
6.6
Rear Axle Oscillation
11 lb / 5 kg
Rear Axle/Diff Fluid Capacity
6.70 gal / 25.4 L
Reverse - 1
4.90 mph / 7.9 km/h
Sae J1349 (1)
143
Sae J1349 (2)
155
Size
17.50
Static Tipping Weight
21,735 lb / 9,859 kg
Steering Angle - Each Direction
40 deg
Steering Articulation
40
Steering Cylinder, Two, Bore
2.80 in / 71 mm
Stroke
5 in / 127 mm
Transmission
2
Transmission Fluid Capacity
9.20 gal / 34.8 L
Turning Radius
17.20 ft / 5.24 m
Hydraulics
Dump Time
1.20 sec
Fops
SAE J/ISO 3449 APR98 Level II, ISO 3449-1992 Level II
Lower Time
2.80 sec
Pump Flow Capacity
40.20 gal/min / 152.2 L/min
Raise Time
6.10 sec
Relief Valve Setting
3,597 psi / 248.0 bar
Rops
SAE J1040 MAY94, ISO 3471-1994
Other
Dump Clearance At Full Lift And 45 Degrees Dump Angle
9.50 ft / 2.90 m
Reach - Full Lift And 45 Degrees Dump
3 ft / 0.91 m
Static Tipping Load - Full Turn
18,931 lb / 8,587 kg
10.1 s
1
Bore (1)
4.80 in / 122 mm
Bore (2)
5 in / 127 mm
Cooling System
11.10 gal / 42.0 L
Crankcase
3.70 gal / 14.0 L
Gross Power
135 hp / 100.7 kW
Hydraulic Cycle Time
10.10
Hydraulic System - Including Tank
33 gal / 124.9 L
Pump Flow - Implement Pump
40.15 gal/min / 152.0 L/min
Raise
6.10
Stroke (1)
27 in / 686 mm
Stroke (2)
21.70 in / 551 mm
Total
10.10
Transmission
9.1
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the Caterpillar 928Gz? +
The Caterpillar 928Gz has an operating weight of 27,135 lb (12,308 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 928Gz engine? +
The Caterpillar 928Gz produces 157 hp (117.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the Caterpillar 928Gz compare to similar Wheel Loader models? +
You can compare the Caterpillar 928Gz side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.