Overview
The Mustang MTL25 is a multi terrain loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 97 hp, operating weight of 10,693 lb, capacity of 0.9 yd³, fuel capacity of 28.6 gal and hydraulic capacity of 25.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Mustang MTL25 against similar multi terrain loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
10,692.50
lb
Gross Power
96.60
hp
Bucket Capacity
0.90
yd3
Full Specifications
38 specs
Dimensions
Breakout Force
8,692 lb / 3,943 kg
Clearance At Max Lift And Dump
7.80 ft / 2.38 m
Ground Clearance
14.30 ft / 4.36 m
Height to Top of Cab
7.28 ft / 2.22 m
Length With Bucket
13.21 ft / 4.03 m
Length With Out Bucket
10.17 ft / 3.10 m
Length of Track on Ground
5.25 ft / 1.60 m
Reach At Max Lift And Dump
3.42 ft / 1.04 m
Turning Radius From Center - Inc Bucket
105.99 ft / 32.31 m
Turning Radius From Center - Machine Rear
71.50 ft / 21.79 m
Width Over Tracks
6.05 ft / 1.84 m
Engine
Alternator Supplied Amperage
60 A
Bucket Capacity
0.90 yd³ / 0.69 m³
Cooling System Fluid Capacity
4 gal / 15.1 L
Displacement
269 cu in / 4.4 L
Engine Make
2348
Engine Model
4TNV106T
Engine Oil Capacity
3.70 gal / 14.0 L
Fuel Capacity
28.60 gal / 108.3 L
Gross Power
97 hp / 72.0 kW
Hydraulic System Fluid Capacity
25.10 gal / 95.0 L
Max Speed - High Range
6.90 mph / 11.1 km/h
Max Speed - Low Range
5 mph / 8.0 km/h
Number of Cylinders
4
Operating Load
3,527 lb / 1,600 kg
Operating Voltage
12 V
Operating Weight
10,693 lb / 4,850 kg
Peak Torque
291 lb-ft / 395 Nm
Power Measured @
2,200 rpm
Pump Flow
23.60 gal/min / 89.3 L/min
Relief Valve Pressure
2,988 psi / 206.0 bar
Tipping Angle
7,057 deg
Torque Measured @
1,400 rpm
Undercarriage
Ground Contact Area
1,132.20 in² / 7,304.5 cm²
Ground Pressure
4 psi / 0.3 bar
Number of Track Rollers per Side
5
Track Gauge
4.56 ft / 1.39 m
Width Of Track
18 ft / 5.49 m
Frequently Asked Questions
What is the operating weight of the Mustang MTL25? +
The Mustang MTL25 has an operating weight of 10,693 lb (4,850 kg). This places it in a class suited for multi terrain loader applications where ground pressure and transport weight are key considerations.
How powerful is the Mustang MTL25 engine? +
The Mustang MTL25 produces 97 hp (72.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Multi Terrain Loader work cycles efficiently.
How does the Mustang MTL25 compare to similar Multi Terrain Loader models? +
You can compare the Mustang MTL25 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.