Overview
The CASE Construction Equipment Case 721E is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 172 hp, operating weight of 30,644 lb, fuel capacity of 65.0 gal and hydraulic capacity of 51.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the CASE Construction Equipment Case 721E against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
30,644
lb
Net Power
172
hp
Gross Power
175
hp
Bucket Capacity - Heaped
3.50
yd3
Full Specifications
46 specs
Dimensions
Breakout Force
29,805 lb / 13,519 kg
Bucket Capacity - Heaped
3.50 yd³ / 2.68 m³
Bucket Capacity - Struck
3 yd³ / 2.29 m³
Bucket Width
8.83 ft / 2.69 m
Dump Clearance At Max Raise
9.48 ft / 2.89 m
Ground Clearance
1.20 ft / 0.37 m
Height to Top of Cab
11.17 ft / 3.40 m
Hinge Pin - Max Height
13.05 ft / 3.98 m
Length With Bucket On Ground
25.29 ft / 7.71 m
Reach At Max Lift And Dump
3.85 ft / 1.17 m
Wheelbase
10.67 ft / 3.25 m
Width Over Tires
8.40 ft / 2.56 m
Engine
Alternator Supplied Amperage
65 A
Cooling System Fluid Capacity
9.80 gal / 37.1 L
Displacement
411 cu in / 6.7 L
Engine Make
2239
Engine Model
Family IV 667TA/EED, Tier III Certified
Engine Oil Fluid Capacity
3.80 gal / 14.4 L
Front Axle/Diff Fluid Capacity
8 gal / 30.3 L
Fuel Capacity
65 gal / 246.1 L
Gross Power
182 hp / 135.7 kW
Hydraulic System Fluid Capacity
51 gal / 193.1 L
Max Speed - Forward
23.60 mph / 38.0 km/h
Max Speed - Reverse
16 mph / 25.7 km/h
Max Torque
596 lb-ft / 808 Nm
Net Power
172 hp / 128.3 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
30,644 lb / 13,900 kg
Power Measured @
1,800 rpm
Rear Axle Oscillation
24 lb / 11 kg
Rear Axle/Diff Fluid Capacity
7.30 gal / 27.6 L
Static Tipping Weight
27,616 lb / 12,526 kg
Torque Measured @
1,300 rpm
Torque Rise
31 lb-ft / 43 Nm
Transmission Fluid Capacity
6.80 gal / 25.7 L
Transmission Type
4F/3R Proportional w/Electronic Control Module torque sensing autoshift/manual shift and modulation
Turning Radius
18.90 ft / 5.76 m
Hydraulics
Dump Time
1.80 sec
Gross Power
175 hp / 130.5 kW
Lower Time
3.30 sec
Pump Flow Capacity
31.60 gal/min / 119.6 L/min
Raise Time
5.60 sec
Relief Valve Setting
3,600 psi / 248.2 bar
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the CASE Construction Equipment Case 721E? +
The CASE Construction Equipment Case 721E has an operating weight of 30,644 lb (13,900 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the CASE Construction Equipment Case 721E engine? +
The CASE Construction Equipment Case 721E produces 182 hp (135.7 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the CASE Construction Equipment Case 721E compare to similar Wheel Loader models? +
You can compare the CASE Construction Equipment Case 721E side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.