Overview
The CASE Construction Equipment Case 821C is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 186 hp, operating weight of 37,901 lb, fuel capacity of 70.8 gal and hydraulic capacity of 46.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the CASE Construction Equipment Case 821C against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
37,901
lb
Net Power
186
hp
Gross Power
175
hp
Bucket Capacity - Heaped
3.51
yd3
Full Specifications
46 specs
Dimensions
Breakout Force
36,391 lb / 16,507 kg
Bucket Capacity - Heaped
3.51 yd³ / 2.68 m³
Bucket Capacity - Struck
3.04 yd³ / 2.32 m³
Bucket Width
9.09 ft / 2.77 m
Dump Clearance At Max Raise
9.75 ft / 2.97 m
Ground Clearance
1.32 ft / 0.40 m
Height to Top of Cab
10.93 ft / 3.33 m
Hinge Pin - Max Height
12.96 ft / 3.95 m
Length With Bucket On Ground
24.51 ft / 7.47 m
Reach At Max Lift And Dump
3.65 ft / 1.11 m
Wheelbase
10.50 ft / 3.20 m
Width Over Tires
8.86 ft / 2.70 m
Engine
Alternator Supplied Amperage
65 A
Cooling System Fluid Capacity
8.50 gal / 32.2 L
Displacement
504 cu in / 8.3 L
Engine Make
2239
Engine Model
6TAA-8304
Engine Oil Fluid Capacity
5.60 gal / 21.2 L
Front Axle/Diff Fluid Capacity
8.80 gal / 33.3 L
Fuel Capacity
70.80 gal / 268.0 L
Gross Power
204 hp / 152.1 kW
Hydraulic System Fluid Capacity
46 gal / 174.1 L
Max Speed - Forward
23.50 mph / 37.8 km/h
Max Speed - Reverse
16.60 mph / 26.7 km/h
Max Torque
671 lb-ft / 910 Nm
Net Power
186 hp / 138.7 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
37,901 lb / 17,192 kg
Power Measured @
2,000 rpm
Rear Axle Oscillation
24 lb / 11 kg
Rear Axle/Diff Fluid Capacity
7.10 gal / 26.9 L
Static Tipping Weight
30,082 lb / 13,645 kg
Torque Measured @
1,400 rpm
Torque Rise
51 lb-ft / 69 Nm
Transmission Fluid Capacity
3.20 gal / 12.1 L
Transmission Type
4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation
Turning Radius
18.90 ft / 5.76 m
Hydraulics
Dump Time
1.60 sec
Gross Power
175 hp / 130.5 kW
Lower Time
4.30 sec
Pump Flow Capacity
50 gal/min / 189.3 L/min
Raise Time
5.90 sec
Relief Valve Setting
2,814 psi / 194.0 bar
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the CASE Construction Equipment Case 821C? +
The CASE Construction Equipment Case 821C has an operating weight of 37,901 lb (17,192 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the CASE Construction Equipment Case 821C engine? +
The CASE Construction Equipment Case 821C produces 204 hp (152.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the CASE Construction Equipment Case 821C compare to similar Wheel Loader models? +
You can compare the CASE Construction Equipment Case 821C side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.