Overview
The CASE Construction Equipment Case 821E is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 198 hp, operating weight of 37,844 lb, fuel capacity of 76.0 gal and hydraulic capacity of 46.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the CASE Construction Equipment Case 821E against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
37,844
lb
Net Power
198
hp
Gross Power
175
hp
Bucket Capacity - Heaped
4.43
yd3
Full Specifications
45 specs
Dimensions
Breakout Force
34,416 lb / 15,611 kg
Bucket Capacity - Heaped
4.43 yd³ / 3.39 m³
Bucket Capacity - Struck
3.78 yd³ / 2.89 m³
Bucket Width
9.60 ft / 2.93 m
Dump Clearance At Max Raise
9.72 ft / 2.96 m
Ground Clearance
1.37 ft / 0.42 m
Height to Top of Cab
11.40 ft / 3.47 m
Hinge Pin - Max Height
13.51 ft / 4.12 m
Length With Bucket On Ground
25.90 ft / 7.89 m
Reach At Max Lift And Dump
3.71 ft / 1.13 m
Wheelbase
10.98 ft / 3.35 m
Width Over Tires
9.47 ft / 2.89 m
Engine
Alternator Supplied Amperage
70 A
Cooling System Fluid Capacity
110.80 gal / 419.4 L
Displacement
411 cu in / 6.7 L
Engine Make
2239
Engine Model
Family IV, 667TA/EBD Tier III Certified
Engine Oil Fluid Capacity
5.60 gal / 21.2 L
Front Axle/Diff Fluid Capacity
9.90 gal / 37.5 L
Fuel Capacity
76 gal / 287.7 L
Gross Power
210 hp / 156.6 kW
Hydraulic System Fluid Capacity
46 gal / 174.1 L
Max Speed - Forward
23 mph / 37.0 km/h
Max Speed - Reverse
15.70 mph / 25.3 km/h
Max Torque
724 lb-ft / 982 Nm
Net Power
198 hp / 147.6 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
37,844 lb / 17,166 kg
Power Measured @
1,800 rpm
Rear Axle Oscillation
24 lb / 11 kg
Rear Axle/Diff Fluid Capacity
6.30 gal / 23.8 L
Static Tipping Weight
31,376 lb / 14,232 kg
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
10.50 gal / 39.7 L
Transmission Type
4F/3R Proportional w/Electronic Control Module
Turning Radius
19.80 ft / 6.04 m
Hydraulics
Dump Time
1.20 sec
Gross Power
175 hp / 130.5 kW
Lower Time
2.80 sec
Pump Flow Capacity
31.60 gal/min / 119.6 L/min
Raise Time
5.60 sec
Relief Valve Setting
3,600 psi / 248.2 bar
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the CASE Construction Equipment Case 821E? +
The CASE Construction Equipment Case 821E has an operating weight of 37,844 lb (17,166 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the CASE Construction Equipment Case 821E engine? +
The CASE Construction Equipment Case 821E produces 210 hp (156.6 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the CASE Construction Equipment Case 821E compare to similar Wheel Loader models? +
You can compare the CASE Construction Equipment Case 821E side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.