Overview
The CASE Construction Equipment Case 921C is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 248 hp, operating weight of 50,621 lb, fuel capacity of 104.1 gal and hydraulic capacity of 61.5 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the CASE Construction Equipment Case 921C against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
50,621
lb
Net Power
248
hp
Gross Power
270
hp
Bucket Capacity - Heaped
4.75
yd3
Full Specifications
44 specs
Dimensions
Breakout Force
50,275 lb / 22,804 kg
Bucket Capacity - Heaped
4.75 yd³ / 3.63 m³
Bucket Capacity - Struck
3.81 yd³ / 2.91 m³
Bucket Width
10.01 ft / 3.05 m
Dump Clearance At Max Raise
10.34 ft / 3.15 m
Ground Clearance
1.46 ft / 0.45 m
Height to Top of Cab
11.72 ft / 3.57 m
Hinge Pin - Max Height
14.05 ft / 4.28 m
Length With Bucket On Ground
28.06 ft / 8.55 m
Reach At Max Lift And Dump
3.61 ft / 1.10 m
Wheelbase
11.16 ft / 3.40 m
Width Over Tires
9.65 ft / 2.94 m
Engine
Alternator Supplied Amperage
70 A
Cooling System Fluid Capacity
12.50 gal / 47.3 L
Displacement
661 cu in / 10.8 L
Engine Make
2347
Engine Oil Fluid Capacity
9.80 gal / 37.1 L
Front Axle/Diff Fluid Capacity
16.90 gal / 64.0 L
Fuel Capacity
104.10 gal / 394.1 L
Gross Power
270 hp / 201.3 kW
Hydraulic System Fluid Capacity
61.50 gal / 232.8 L
Max Speed - Forward
24.10 mph / 38.8 km/h
Max Speed - Reverse
16.60 mph / 26.7 km/h
Max Torque
926 lb-ft / 1,255 Nm
Net Power
248 hp / 184.9 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
50,621 lb / 22,961 kg
Power Measured @
2,100 rpm
Rear Axle Oscillation
24 lb / 11 kg
Rear Axle/Diff Fluid Capacity
16.90 gal / 64.0 L
Static Tipping Weight
43,306 lb / 19,643 kg
Torque Measured @
1,300 rpm
Torque Rise
41 lb-ft / 56 Nm
Transmission Fluid Capacity
7.60 gal / 28.8 L
Transmission Type
4F/3R proportional w/ electronic control module torque sensing autoshift/manual shift and modulation
Turning Radius
20.20 ft / 6.16 m
Hydraulics
Dump Time
1.50 sec
Lower Time
4.90 sec
Pump Flow Capacity
38 gal/min / 143.8 L/min
Raise Time
6.20 sec
Relief Valve Setting
2,850 psi / 196.5 bar
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the CASE Construction Equipment Case 921C? +
The CASE Construction Equipment Case 921C has an operating weight of 50,621 lb (22,961 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the CASE Construction Equipment Case 921C engine? +
The CASE Construction Equipment Case 921C produces 270 hp (201.3 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the CASE Construction Equipment Case 921C compare to similar Wheel Loader models? +
You can compare the CASE Construction Equipment Case 921C side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.