Overview
The CASE Construction Equipment Case 921E is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 297 hp, operating weight of 50,622 lb, fuel capacity of 104.0 gal and hydraulic capacity of 64.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the CASE Construction Equipment Case 921E against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
50,622
lb
Net Power
297
hp
Gross Power
274
hp
Bucket Capacity - Heaped
5.78
yd3
Full Specifications
44 specs
Dimensions
Breakout Force
44,476 lb / 20,174 kg
Bucket Capacity - Heaped
5.78 yd³ / 4.42 m³
Bucket Capacity - Struck
4.88 yd³ / 3.73 m³
Bucket Width
10.40 ft / 3.17 m
Dump Clearance At Max Raise
10.09 ft / 3.08 m
Ground Clearance
1.60 ft / 0.49 m
Height to Top of Cab
12.12 ft / 3.69 m
Hinge Pin - Max Height
14.03 ft / 4.28 m
Length With Bucket On Ground
28.88 ft / 8.80 m
Reach At Max Lift And Dump
4.17 ft / 1.27 m
Wheelbase
11.17 ft / 3.40 m
Width Over Tires
9.81 ft / 2.99 m
Engine
Alternator Supplied Amperage
95 A
Cooling System Fluid Capacity
15 gal / 56.8 L
Displacement
660 cu in / 10.8 L
Engine Make
2347
Engine Model
QSM 11, Tier III Certified
Engine Oil Fluid Capacity
9.80 gal / 37.1 L
Front Axle/Diff Fluid Capacity
12.50 gal / 47.3 L
Fuel Capacity
104 gal / 393.7 L
Gross Power
274 hp / 204.3 kW
Hydraulic System Fluid Capacity
64 gal / 242.3 L
Max Speed - Forward
23.20 mph / 37.3 km/h
Max Speed - Reverse
16.10 mph / 25.9 km/h
Max Torque
1,013 lb-ft / 1,373 Nm
Net Power
297 hp / 221.5 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
50,622 lb / 22,962 kg
Power Measured @
1,800 rpm
Rear Axle Oscillation
24 lb / 11 kg
Rear Axle/Diff Fluid Capacity
12.50 gal / 47.3 L
Static Tipping Weight
42,592 lb / 19,319 kg
Torque Measured @
900 rpm
Transmission Fluid Capacity
10.50 gal / 39.7 L
Transmission Type
4F/3R Proportional w/Electronic Control Module
Turning Radius
22.60 ft / 6.89 m
Hydraulics
Dump Time
3.60 sec
Lower Time
3 sec
Pump Flow Capacity
42.80 gal/min / 162.0 L/min
Raise Time
6.20 sec
Relief Valve Setting
3,600 psi / 248.2 bar
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the CASE Construction Equipment Case 921E? +
The CASE Construction Equipment Case 921E has an operating weight of 50,622 lb (22,962 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the CASE Construction Equipment Case 921E engine? +
The CASE Construction Equipment Case 921E produces 274 hp (204.3 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the CASE Construction Equipment Case 921E compare to similar Wheel Loader models? +
You can compare the CASE Construction Equipment Case 921E side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.