Overview
The Caterpillar 928G is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 125 hp, operating weight of 25,699 lb, fuel capacity of 60.8 gal and hydraulic capacity of 33.1 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the Caterpillar 928G against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
25,699.30
lb
Net Power
125
hp
Bucket Capacity - Heaped
2.23
yd3
Overall Length
23.10
ft
Full Specifications
90 specs
Dimensions
Breakout Force
25,849 lb / 11,725 kg
Bucket Capacity - Heaped
2.23 yd³ / 1.70 m³
Bucket Clearance-Maximum Lift/Carry
12.40 ft / 3.78 m
Bucket Pin Height - Maximum Lift
12.40 ft / 3.78 m
Bucket Width
8.37 ft / 2.55 m
Carry Height
3 ft / 0.91 m
Centerline Of Front Axle To Hitch
4.91 in / 125 mm
Digging Depth
3.40 ft / 1.04 m
Dump Angle At Maximum Lift
45 deg
Dump Clearance At Max Raise
9.45 ft / 2.88 m
Dump Clearance At Maximum Lift - 45 Degrees
9.50 ft / 2.90 m
Ground Clearance
1.40 ft / 0.43 m
Height - Center Of Axle
2.30 ft / 0.70 m
Height - Top Of Exhaust Stack
10.60 ft / 3.23 m
Height - Top Of Hood
87.60 in / 2,225 mm
Height - Top Of Rops/Fops
10.80 ft / 3.29 m
Height to Top of Cab
10.73 ft / 3.27 m
Length - Rear Axle To Bumper
6.40 ft / 1.95 m
Length With Bucket On Ground
23.81 ft / 7.26 m
Overall Height
16.40 ft / 5.00 m
Overall Height - Bucket Raised
16.40 ft / 5.00 m
Overall Length
23.10 ft / 7.04 m
Rack Back Angle - Carry
47.80 deg
Rack Back Angle - Ground
44 deg
Rack Back Angle - Maximum Lift
58 deg
Reach At Max Lift And Dump
3.05 ft / 0.93 m
Reach At Maximum Lift And 45 Degrees Dump
3 ft / 0.91 m
Tread Width
96 in / 2,438 mm
Wheel Base
9.60 in / 244 mm
Wheel Base Length
9.60 ft / 2.93 m
Width - Over Tires
77 in / 1,956 mm
Width Over Tires
8.01 ft / 2.44 m
Engine
Articulation Angle
40 deg
Axle Oscillation
11 lb / 5 kg
Bore
4 in / 102 mm
Displacement
366 cu in / 6.0 L
Eec 80/1269 (1)
145
Eec 80/1269 (2)
156
Engine Model
3116T
Forward - 1
4.90 mph / 7.9 km/h
Front
6.9
Fuel Capacity
60.80 gal / 230.2 L
Fuel Tank
59.40 gal / 224.9 L
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)
27 gal/min / 102.2 L/min
Hydraulic System Fluid Capacity
33.10 gal / 125.3 L
Hydraulic Tank
18.50 gal / 70.0 L
Iso 9249 (1997) (1)
145
Iso 9249 (1997) (2)
156
Max Speed - Forward
22.90 mph / 36.9 km/h
Max Speed - Reverse
15.30 mph / 24.6 km/h
Maximum Net Power - 2000 Rpm
155 hp / 115.6 kW
Maximum Working Pressure
3,000 psi / 206.8 bar
Minimum Turning Radius - Over Tires
206 ft / 62.79 m
Net Power
125 hp / 93.2 kW
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Weight
25,699 lb / 11,657 kg
Rated Net Power
143 hp / 106.6 kW
Rear
6.6
Reverse - 1
4.90 mph / 7.9 km/h
Sae J1349 (1)
143
Sae J1349 (2)
155
Size
17.50
Static Tipping Weight
20,351 lb / 9,231 kg
Steering Angle - Each Direction
40 deg
Steering Cylinder, Two, Bore
2.80 in / 71 mm
Stroke
5 in / 127 mm
Transmission
2
Hydraulics
Dump Time
1.20 sec
Fops
SAE J231 JAN81, ISO 3449-1992 Level II
Lower Time
2.80 sec
Raise Time
6.10 sec
Relief Valve Setting
3,600 psi / 248.2 bar
Rops
SAE J1040 MAY94, ISO 3471-1994
Other
Dump Clearance At Full Lift And 45 Degrees Dump Angle
9.50 ft / 2.90 m
Reach - Full Lift And 45 Degrees Dump
3 ft / 0.91 m
Static Tipping Load - Full Turn
18,018 lb / 8,173 kg
10.1 s
1
Bore (1)
4.80 in / 122 mm
Bore (2)
5 in / 127 mm
Cooling System
11.10 gal / 42.0 L
Crankcase
4.20 gal / 15.9 L
Hydraulic Cycle Time
10.10
Hydraulic System - Including Tank
33 gal / 124.9 L
Pump Flow - Implement Pump
40.15 gal/min / 152.0 L/min
Raise
6.10
Stroke (1)
27 in / 686 mm
Stroke (2)
21.70 in / 551 mm
Total
10.10
Transmission
9.1
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the Caterpillar 928G? +
The Caterpillar 928G has an operating weight of 25,699 lb (11,657 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 928G engine? +
The Caterpillar 928G produces 125 hp (93.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the Caterpillar 928G compare to similar Wheel Loader models? +
You can compare the Caterpillar 928G side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.