Overview
The Caterpillar 962H is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 211 hp, operating weight of 42,700 lb, fuel capacity of 83.0 gal and hydraulic capacity of 29.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the Caterpillar 962H against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
42,700
lb
Net Power
211
hp
Gross Power
228
hp
Bucket Capacity - Heaped
4.50
yd3
Full Specifications
83 specs
Dimensions
B-Pin Height - Standard
13.10 ft / 3.99 m
Breakout Force
33,075 lb / 15,003 kg
Bucket Capacity - Heaped
4.50 yd³ / 3.44 m³
Bucket Capacity - Struck
3.90 yd³ / 2.98 m³
Bucket Width
9.67 ft / 2.95 m
Centerline Of Rear Axle To Hitch
66 in / 1,676 mm
Centerline Rear Axle To Edge Of Counterweight
6.41 in / 163 mm
Dump Clearance At Max Raise
9.25 ft / 2.82 m
Ground Clearance
1.35 ft / 0.41 m
Height - Top Of Exhaust Pipe
132.60 in / 3,368 mm
Height - Top Of Hood
96.96 in / 2,463 mm
Height - Top Of Rops
11.33 ft / 3.45 m
Height to Top of Cab
11.33 ft / 3.45 m
Hinge Pin - Max Height
13.08 ft / 3.99 m
Length With Bucket On Ground
26.75 ft / 8.15 m
Reach At Max Lift And Dump
4.25 ft / 1.30 m
Wheel Base
11 in / 279 mm
Wheelbase
11 ft / 3.35 m
Width Over Tires
9.17 ft / 2.80 m
Engine
Alternator Supplied Amperage
80 A
Bore
4.40 in / 112 mm
Breakout Force - Reference Bucket
40,466 lb / 18,355 kg
Capacity - Reference Bucket
3.60
Cooling System Fluid Capacity
11 gal / 41.6 L
Displacement
439 cu in / 7.2 L
Engine Make
2236
Engine Model
C7 ACERT
Engine Oil Fluid Capacity
7.90 gal / 29.9 L
Flywheel Power
211 hp / 157.3 kW
Forward - 1
4.40 mph / 7.1 km/h
Forward - 2
8.10 mph / 13.0 km/h
Forward - 3
14 mph / 22.5 km/h
Forward - 4
23.60 mph / 38.0 km/h
Front Axle/Diff Fluid Capacity
9.50 gal / 36.0 L
Fuel Capacity
83 gal / 314.2 L
Gross Power
230 hp / 171.5 kW
Gross Power - Sae J1995
230 hp / 171.5 kW
Hydraulic System Fluid Capacity
29 gal / 109.8 L
Hydraulic Tank
29 gal / 109.8 L
Max Speed - Forward
23.60 mph / 38.0 km/h
Max Speed - Reverse
24.90 mph / 40.1 km/h
Max Torque
669 lb-ft / 907 Nm
Maximum Bucket Capacity
5 yd³ / 3.82 m³
Net Power
211 hp / 157.3 kW
Net Power - 80/1269/Eec
211 hp / 157.3 kW
Net Power - Iso 9249
211 hp / 157.3 kW
Net Power - Sae J1349
209 hp / 155.9 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
4
Operating Voltage
24 V
Operating Weight
42,700 lb / 19,368 kg
Peak Torque - 1,400 Rpm - Net
669 lb-ft / 907 Nm
Power Measured @
1,800 rpm
Rear
Oscillating +/- 13?
Rear Axle Oscillation
26 lb / 12 kg
Rear Axle/Diff Fluid Capacity
9.50 gal / 36.0 L
Reverse - 1
4.70 mph / 7.6 km/h
Reverse - 2
8.60 mph / 13.8 km/h
Reverse - 3
15.20 mph / 24.5 km/h
Reverse - 4
24.90 mph / 40.1 km/h
Static Tipping Weight
30,603 lb / 13,881 kg
Stroke
5 in / 127 mm
Transmission Fluid Capacity
9 gal / 34.1 L
Turning Radius
23.40 ft / 7.13 m
Hydraulics
Bucket/Work Tool System - Pump Output
71 gal/min / 268.8 L/min
Dump Time
1.30 sec
Hydraulic Cycle Time - Dump
1.30
Hydraulic Cycle Time - Raise
6.20
Hydraulic Cycle Time - Total
10
Lower Time
2.50 sec
Maximum Single-Wheel Rise And Fall
18.50
Pump Flow Capacity
71 gal/min / 268.8 L/min
Raise Time
6.20 sec
Relief Valve Setting
1,000 psi / 68.9 bar
Other
Static Tipping Load - Full Turn
26,676 lb / 12,100 kg
Cooling System
11 gal / 41.6 L
Crankcase
7.90 gal / 29.9 L
Differential - Final Drives - Front
9.5
Differential - Final Drives - Rear
9.5
Fuel Tank - Standard
83 gal / 314.2 L
Gross Power
228 hp / 170.0 kW
Transmission
9
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the Caterpillar 962H? +
The Caterpillar 962H has an operating weight of 42,700 lb (19,368 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 962H engine? +
The Caterpillar 962H produces 230 hp (171.5 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the Caterpillar 962H compare to similar Wheel Loader models? +
You can compare the Caterpillar 962H side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.