Overview
The Caterpillar 966H is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 262 hp, operating weight of 52,254 lb, fuel capacity of 100.4 gal and hydraulic capacity of 29.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the Caterpillar 966H against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
52,254
lb
Net Power
262
hp
Gross Power
286
hp
Bucket Capacity - Heaped
5.50
yd3
Full Specifications
87 specs
Dimensions
B-Pin Height - Standard
13.86 ft / 4.22 m
Breakout Force
42,300 lb / 19,187 kg
Bucket Capacity - Heaped
5.50 yd³ / 4.21 m³
Bucket Capacity - Struck
4.74 yd³ / 3.62 m³
Bucket Width
10.58 ft / 3.22 m
Centerline Of Rear Axle To Hitch
67.92 in / 1,725 mm
Centerline Rear Axle To Edge Of Counterweight
8.07 in / 205 mm
Dump Clearance At Max Raise
10.17 ft / 3.10 m
Ground Clearance
1.63 ft / 0.50 m
Height - Top Of Exhaust Pipe
139.81 in / 3,551 mm
Height - Top Of Hood
105.48 in / 2,679 mm
Height - Top Of Rops
11.81 ft / 3.60 m
Height to Top of Cab
11.83 ft / 3.61 m
Hinge Pin - Max Height
13.86 ft / 4.22 m
Length With Bucket On Ground
29.08 ft / 8.86 m
Reach At Max Lift And Dump
4.25 ft / 1.30 m
Wheel Base
11.32 in / 288 mm
Wheelbase
11.32 ft / 3.45 m
Width Over Tires
9.67 ft / 2.95 m
Engine
Alternator Supplied Amperage
80 A
Bore
5.20 in / 132 mm
Breakout Force - Reference Bucket
48,559 lb / 22,026 kg
Capacity - Reference Bucket
4.60
Cooling System Fluid Capacity
10.30 gal / 39.0 L
Displacement
677 cu in / 11.1 L
Engine Make
2236
Engine Model
C11 ACERT
Engine Oil Fluid Capacity
9.30 gal / 35.2 L
Flywheel Power
262 hp / 195.4 kW
Forward - 1
4.20 mph / 6.8 km/h
Forward - 2
7.80 mph / 12.6 km/h
Forward - 3
13.70 mph / 22.0 km/h
Forward - 4
23.20 mph / 37.3 km/h
Front Axle/Diff Fluid Capacity
16.90 gal / 64.0 L
Fuel Capacity
100.40 gal / 380.1 L
Gross Power
286 hp / 213.3 kW
Gross Power - Sae J1995
286 hp / 213.3 kW
Hydraulic System Fluid Capacity
29 gal / 109.8 L
Hydraulic Tank
29 gal / 109.8 L
Max Speed - Forward
23.20 mph / 37.3 km/h
Max Speed - Reverse
23.20 mph / 37.3 km/h
Max Torque
896 lb-ft / 1,215 Nm
Maximum Bucket Capacity
5.50 yd³ / 4.21 m³
Net Power
262 hp / 195.4 kW
Net Power - 80/1269/Eec
262 hp / 195.4 kW
Net Power - Iso 9249
262 hp / 195.4 kW
Net Power - Sae J1349
259 hp / 193.1 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
4
Operating Voltage
24 V
Operating Weight
52,254 lb / 23,702 kg
Peak Torque - 1,400 Rpm - Net
896 lb-ft / 1,215 Nm
Power Measured @
1,800 rpm
Rear
Oscillating +/- 13?
Rear Axle Oscillation
26 lb / 12 kg
Rear Axle/Diff Fluid Capacity
16.90 gal / 64.0 L
Reverse - 1
4.60 mph / 7.4 km/h
Reverse - 2
8.60 mph / 13.8 km/h
Reverse - 3
15.10 mph / 24.3 km/h
Reverse - 4
23.20 mph / 37.3 km/h
Static Tipping Weight
38,354 lb / 17,397 kg
Stroke
5.60 in / 142 mm
Tire Size
26.50 in / 673 mm
Torque Measured @
1,400 rpm
Torque Rise
38 lb-ft / 52 Nm
Transmission Fluid Capacity
11.70 gal / 44.3 L
Turning Radius
24.20 ft / 7.38 m
Hydraulics
Bucket/Work Tool System - Pump Output
80.60 gal/min / 305.1 L/min
Dump Time
1.60 sec
Hydraulic Cycle Time - Dump
1.60
Hydraulic Cycle Time - Raise
5.90
Hydraulic Cycle Time - Total
9.90
Lower Time
2.40 sec
Maximum Single-Wheel Rise And Fall
19.80
Pilot System - Pump Output
84.54 gal/min / 320.0 L/min
Pump Flow Capacity
80.60 gal/min / 305.1 L/min
Raise Time
5.90 sec
Relief Valve Setting
1,000 psi / 68.9 bar
Other
Dump Clearance
9,858.90 ft / 3,004.99 m
Static Tipping Load - Full Turn
34,120 lb / 15,477 kg
Cooling System
10.30 gal / 39.0 L
Crankcase
9.30 gal / 35.2 L
Differential - Final Drives - Front
16.9
Differential - Final Drives - Rear
16.9
Fuel Tank - Standard
100.40 gal / 380.1 L
Transmission
11.7
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the Caterpillar 966H? +
The Caterpillar 966H has an operating weight of 52,254 lb (23,702 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 966H engine? +
The Caterpillar 966H produces 286 hp (213.3 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the Caterpillar 966H compare to similar Wheel Loader models? +
You can compare the Caterpillar 966H side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.