Overview
The Caterpillar 980H is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 318 hp, operating weight of 66,489 lb, fuel capacity of 127.0 gal and hydraulic capacity of 66.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the Caterpillar 980H against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
66,489.30
lb
Net Power
318
hp
Gross Power
367.50
hp
Bucket Capacity - Heaped
5.50
yd3
Full Specifications
89 specs
Dimensions
B-Pin Height - Standard
14.78 ft / 4.50 m
Breakout Force
61,425 lb / 27,862 kg
Bucket Capacity - Heaped
5.50 yd³ / 4.21 m³
Bucket Capacity - Struck
4.78 yd³ / 3.65 m³
Bucket Width
11.59 ft / 3.53 m
Centerline Of Rear Axle To Hitch
72.84 in / 1,850 mm
Centerline Rear Axle To Edge Of Counterweight
8.18 in / 208 mm
Dump Clearance At Max Raise
10.83 ft / 3.30 m
Ground Clearance
1.45 ft / 0.44 m
Height - Top Of Exhaust Pipe
146.28 in / 3,716 mm
Height - Top Of Hood
106.92 in / 2,716 mm
Height - Top Of Rops
12.35 ft / 3.76 m
Height to Top of Cab
12.35 ft / 3.76 m
Hinge Pin - Max Height
14.78 ft / 4.50 m
Length With Bucket On Ground
31.08 ft / 9.47 m
Reach At Max Lift And Dump
5.08 ft / 1.55 m
Wheel Base
12.14 in / 308 mm
Wheelbase
12.17 ft / 3.71 m
Width Over Tires
10.58 ft / 3.22 m
Engine
Alternator Supplied Amperage
80 A
Bore
5.40 in / 137 mm
Breakout Force - Reference Bucket
61,373 lb / 27,838 kg
Bucket Capacities
3.80
Capacity - Reference Bucket
5.50
Cooling System Fluid Capacity
22 gal / 83.3 L
Displacement
928 cu in / 15.2 L
Engine Make
2236
Engine Model
C15 ACERT
Engine Oil Fluid Capacity
10 gal / 37.9 L
Forward - 1
4.10 mph / 6.6 km/h
Forward - 2
7.30 mph / 11.7 km/h
Forward - 3
12.90 mph / 20.8 km/h
Forward - 4
22.60 mph / 36.4 km/h
Front Axle/Diff Fluid Capacity
23 gal / 87.1 L
Fuel Capacity
127 gal / 480.7 L
Gross Power
355 hp / 264.7 kW
Gross Power - Sae J1995
393 hp / 293.1 kW
Hydraulic System Fluid Capacity
66 gal / 249.8 L
Hydraulic Tank
33 gal / 124.9 L
Max Speed - Forward
22.60 mph / 36.4 km/h
Max Speed - Reverse
25.80 mph / 41.5 km/h
Max Torque
1,191 lb-ft / 1,615 Nm
Maximum Bucket Capacity
8 yd³ / 6.12 m³
Net Power
318 hp / 237.1 kW
Net Power - 80/1269/Eec
353 hp / 263.2 kW
Net Power - Iso 9249
349 hp / 260.2 kW
Net Power - Sae J1349
349 hp / 260.2 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
4
Operating Voltage
24 V
Operating Weight
66,489 lb / 30,159 kg
Peak Torque - 1,200 Rpm - Net
1,244 lb-ft / 1,687 Nm
Power Measured @
1,800 rpm
Rear
Oscillating +/- 13?
Rear Axle Oscillation
26 lb / 12 kg
Rear Axle/Diff Fluid Capacity
23 gal / 87.1 L
Reverse - 1
4.70 mph / 7.6 km/h
Reverse - 2
8.40 mph / 13.5 km/h
Reverse - 3
14.70 mph / 23.7 km/h
Reverse - 4
25.80 mph / 41.5 km/h
Static Tipping Weight
50,201 lb / 22,771 kg
Stroke
6.80 in / 173 mm
Tire Size
29.50 in / 749 mm
Transmission Fluid Capacity
16 gal / 60.6 L
Turning Radius
26.10 ft / 7.96 m
Hydraulics
Bucket/Work Tool System - Pump Output
123 gal/min / 465.6 L/min
Bucket/Work Tool System - Relief Valve Setting
3,000 psi / 206.8 bar
Dump Time
2.10 sec
Hydraulic Cycle Time - Dump
2.10
Hydraulic Cycle Time - Raise
6
Hydraulic Cycle Time - Total
11.50
Lower Time
3.40 sec
Maximum Single-Wheel Rise And Fall
21.70
Pilot System - Pump Output
122.58 gal/min / 464.0 L/min
Pump Flow Capacity
123 gal/min / 465.6 L/min
Raise Time
6 sec
Relief Valve Setting
3,000 psi / 206.8 bar
Other
Breakout Force
44,775 lb / 20,310 kg
Dump Clearance
10,843.20 ft / 3,305.01 m
Static Tipping Load - Full Turn
42,989 lb / 19,499 kg
Cooling System
22 gal / 83.3 L
Crankcase
17 gal / 64.4 L
Differential - Final Drives - Front
23
Differential - Final Drives - Rear
23
Fuel Tank - Standard
127 gal / 480.7 L
Gross Power
368 hp / 274.0 kW
Hydraulic System - Including Tank
66 gal / 249.8 L
Transmission
16
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the Caterpillar 980H? +
The Caterpillar 980H has an operating weight of 66,489 lb (30,159 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 980H engine? +
The Caterpillar 980H produces 355 hp (264.7 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the Caterpillar 980H compare to similar Wheel Loader models? +
You can compare the Caterpillar 980H side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.