Overview
The Caterpillar 980K is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 369 hp, operating weight of 66,489 lb, fuel capacity of 127.0 gal and hydraulic capacity of 66.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the Caterpillar 980K against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
66,489.30
lb
Net Power
369
hp
Gross Power
367.50
hp
Bucket Capacity - Heaped
5.50
yd3
Full Specifications
102 specs
Dimensions
Breakout Force
61,425 lb / 27,862 kg
Bucket Capacity - Heaped
5.50 yd³ / 4.21 m³
Bucket Capacity - Struck
4.78 yd³ / 3.65 m³
Bucket Width
11.59 ft / 3.53 m
Dump Clearance At Max Raise
10.83 ft / 3.30 m
Ground Clearance
1.45 ft / 0.44 m
Height to Top of Cab
12.35 ft / 3.76 m
Hinge Pin - Max Height
14.78 ft / 4.50 m
Length With Bucket On Ground
31.08 ft / 9.47 m
Reach At Max Lift And Dump
5.08 ft / 1.55 m
Wheelbase
12.17 ft / 3.71 m
Width Over Tires
10.58 ft / 3.22 m
Engine
29.5R25 VMT BS L3 Radial; 29.5R25 XHA2 MX L3 Radial; 29.5R25 VSDL BS L5 Radial
2
29.5R25 XLDD2 MX L5 Radial; 29.5R25 X MINE D2 MX L5 Radial
3
Alternator Supplied Amperage
80 A
Bore
5.10 in / 130 mm
Choices
1
Choices (1)
29.50
Choices (2)
29.50
Cooling System Fluid Capacity
22 gal / 83.3 L
Displacement
763 cu in / 12.5 L
Engine Make
2236
Engine Model
C15 ACERT
Engine Oil Fluid Capacity
10 gal / 37.9 L
Front Axle/Diff Fluid Capacity
23 gal / 87.1 L
Fuel Capacity
127 gal / 480.7 L
Gross Power
355 hp / 264.7 kW
Hydraulic System Fluid Capacity
66 gal / 249.8 L
Hydraulic Tank
44.90 gal / 170.0 L
Lockup Torque Converter - Forward 1
4 lb-ft / 6 Nm
Lockup Torque Converter - Forward 2
8 lb-ft / 11 Nm
Lockup Torque Converter - Forward 3
14 lb-ft / 19 Nm
Lockup Torque Converter - Forward 4
25 lb-ft / 34 Nm
Lockup Torque Converter - Reverse 1
5 lb-ft / 7 Nm
Lockup Torque Converter - Reverse 2
9 lb-ft / 12 Nm
Lockup Torque Converter - Reverse 3
16 lb-ft / 22 Nm
Lockup Torque Converter - Reverse 4
25 lb-ft / 34 Nm
Max Speed - Forward
22.60 mph / 36.4 km/h
Max Speed - Reverse
25.80 mph / 41.5 km/h
Max Torque
1,191 lb-ft / 1,615 Nm
Maximum Gross Power - 1,600 Rpm - Sae J1995
406 hp / 302.8 kW
Maximum Gross Power - 1,600 Rpm - Sae J1995 - Metric
412 hp / 307.2 kW
Maximum Gross Power - Iso 14396
402 hp / 299.8 kW
Maximum Gross Power - Iso 14396 (Metric)
408 hp / 304.2 kW
Maximum Net Power - 1,600 Rpm - Iso 9249
369 hp / 275.2 kW
Maximum Net Power - 1,600 Rpm - Iso 9249 - Metric
373 hp / 278.1 kW
Maximum Net Power - 1,600 Rpm - Sae J1349
369 hp / 275.2 kW
Maximum Net Power - 1,600 Rpm - Sae J1349 - Metric
373 hp / 278.1 kW
Maximum Net Power - 1,800 Rpm - Eec 80/1269
369 hp / 275.2 kW
Maximum Net Power - 1,800 Rpm - Eec 80/1269 - Metric
373 hp / 278.1 kW
Net Power
369 hp / 275.2 kW
Net Power - Iso 9249
369 hp / 275.2 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
4
Operating Voltage
24 V
Operating Weight
66,489 lb / 30,159 kg
Peak Gross Torque - 1,300 Rpm - Sae J1995
1,541 lb-ft / 2,089 Nm
Peak Net Torque - 1,200 Rpm - Sae J1349
1,445 lb-ft / 1,959 Nm
Power - Iso 14396
402
Power Measured @
1,800 rpm
Rear
Oscillating ?13 degrees
Rear Axle Oscillation
26 lb / 12 kg
Rear Axle/Diff Fluid Capacity
23 gal / 87.1 L
Standard Torque Converter - Forward 1
4 lb-ft / 6 Nm
Standard Torque Converter - Forward 2
8 lb-ft / 10 Nm
Standard Torque Converter - Forward 3
13 lb-ft / 18 Nm
Standard Torque Converter - Forward 4
24 lb-ft / 32 Nm
Standard Torque Converter - Reverse 1
5 lb-ft / 7 Nm
Standard Torque Converter - Reverse 2
9 lb-ft / 12 Nm
Standard Torque Converter - Reverse 3
15 lb-ft / 21 Nm
Standard Torque Converter - Reverse 4
27 lb-ft / 36 Nm
Static Tipping Weight
50,201 lb / 22,771 kg
Stroke
6.20 in / 157 mm
Tire Size
29.50 in / 749 mm
Transmission Fluid Capacity
16 gal / 60.6 L
Turning Radius
26.10 ft / 7.96 m
Hydraulics
1.7 s
3
Dump Time
2.10 sec
Hydraulic Cycle Time - Dump, At Maximum Raise
1.70
Hydraulic Cycle Time - Raise From Carry Position
6.40
Hydraulic Cycle Time - Total
11.40
Implement System - Maximum Operating Pressure
4,496 psi / 310.0 bar
Implement System - Maximum Pump Output At 2,200 Rpm
121.50 gal/min / 459.9 L/min
Implement System - Optional 3rd Function Maximum Flow
79.30 gal/min / 300.2 L/min
Implement System - Optional 3rd Function Maximum Pressure
3,000 psi / 206.8 bar
Lower Time
3.40 sec
Maximum Single-Wheel Rise And Fall
21.60
Pump Flow Capacity
123 gal/min / 465.6 L/min
Raise Time
6 sec
Relief Valve Setting
3,000 psi / 206.8 bar
Other
Static Tipping Load - Full 37 Degrees Turn - Iso 14397-1*
42,464 lb / 19,261 kg
Static Tipping Load - Full 37 Degrees Turn - Rigid Tires**
45,148 in / 1,146,759 mm
Brakes
Meet OSHA, SAE J1473 OCT90 and ISO 3450-1985 required standards
Cooling System
16.60 gal / 62.8 L
Crankcase
9.80 gal / 37.1 L
Differential - Final Drives - Front
22.2
Differential - Final Drives - Rear
22.2
Fuel Tank - Standard
118.10 gal / 447.1 L
Gross Power
368 hp / 274.0 kW
Power Level
109
Transmission
17.4
Related Machines
Related Guides & Articles
Frequently Asked Questions
What is the operating weight of the Caterpillar 980K? +
The Caterpillar 980K has an operating weight of 66,489 lb (30,159 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 980K engine? +
The Caterpillar 980K produces 355 hp (264.7 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the Caterpillar 980K compare to similar Wheel Loader models? +
You can compare the Caterpillar 980K side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.