Overview
The Caterpillar D4G is a crawler tractor listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 80 hp, operating weight of 18,210 lb, working depth of 13.30 ft, fuel capacity of 49.5 gal and hydraulic capacity of 16.20 gal/min. This model can be reviewed for pulling power, implement matching, agricultural operations, and equipment comparison. Use the full specifications table to compare the Caterpillar D4G against similar crawler tractor models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
18,210.20
lb
Net Power
65
hp
Gross Power
87
hp
Overall Width
67.30
in
Full Specifications
110 specs
Dimensions
Bulldozer Blade Width - Straight
8.76 ft / 2.67 m
Ground Clearance
1.23 ft / 0.37 m
Height to Top of Cab
8.92 ft / 2.72 m
Length of Track on Ground
10.19 ft / 3.11 m
Length w/ Blade
13.24 ft / 4.04 m
Length w/o Blade
10.19 ft / 3.11 m
Overall Height
8.92 ft / 2.72 m
Overall Width
29.20 ft / 8.90 m
Weight
1,345 lb / 610 kg
Width Over Tracks
6.43 ft / 1.96 m
Engine
--
Case 650L
Blade Capacity - Intermediate
2.30 in / 58 mm
Blade Capacity - Lgp
2.50 in / 64 mm
Blade Capacity - Xl
2.60 in / 66 mm
Blade Height - Intermediate
36.30 ft / 11.06 m
Blade Height - Lgp
36.30 ft / 11.06 m
Blade Height - Xl
40.50 in / 1,029 mm
Blade Width - Intermediate
115 in / 2,921 mm
Blade Width - Lgp
123.90 in / 3,147 mm
Blade Width - Xl
105.20 in / 2,672 mm
Bore
3.70 in / 94 mm
Cat 3046
Eec 80/1269
Caterpillar
80
Cooling System Fluid Capacity
5.60 gal / 21.2 L
Digging Depth - Intermediate
20.50 ft / 6.25 m
Digging Depth - Lgp
20.50 ft / 6.25 m
Digging Depth - Xl
22.40 ft / 6.83 m
Displacement
305 cu in / 5.0 L
Drive Pumps
2
Drum Diameter
10 in / 254 mm
Drum Width
10.80 ft / 3.29 m
Eec 80/1269
80
Engine Make
2236
Engine Model
3046T
Engine Oil Capacity
3.50 gal / 13.2 L
Final Drives Fluid Capacity
3.90 gal / 14.8 L
Fuel Capacity
49.50 gal / 187.4 L
Fuel Tank
48.60 gal / 184.0 L
Gross Power
87 hp / 64.9 kW
Height
40.50 in / 1,029 mm
Hydraulic Fluid Capacity
12.30 gal / 46.6 L
Iso 9249
80
Max Speed - Forward
5.60 mph / 9.0 km/h
Max Speed - Reverse
6 mph / 9.7 km/h
Maximum Travel Speed - Forward
5.60 mph / 9.0 km/h
Maximum Travel Speed - Reverse
6 mph / 9.7 km/h
Net Power
80 hp / 59.7 kW
Number of Cylinders
6
Number of Forward Gears
1
Number of Reverse Gears
1
Operating Weight
18,210 lb / 8,260 kg
Operating Weight - Lgp
18,074 lb / 8,198 kg
Operating Weight - Xl
17,317 lb / 7,855 kg
Power - Gross
87
Power - Net
80
Power Measured @
2,200 rpm
Relief Valve Pressure
2,901 psi / 200.0 bar
Relief Valve Settings
6,380 psi / 439.9 bar
Sae J1349
80
Stroke
4.70 in / 119 mm
Track Motors
2
Width
8.80 ft / 2.68 m
Hydraulics
Blade Angle (Both Directions)
25 deg
Capacity
2.60 yd³ / 1.99 m³
Cutting Depth
22.40 ft / 6.83 m
Fops
SAE J231-JAN81, ISO 3449-92
Maximum Line Pull - Bare Drum
40,000 lb / 18,144 kg
Pump Flow Capacity
16.20 gal/min / 61.3 L/min
Pump Output
16.14 gal/min / 61.1 L/min
Relief Valve Setting
2,900 psi / 199.9 bar
Rops
SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95
Throat Clearance
6.80 ft / 2.07 m
Other
Dig Depth - Vpat Blade
22.40 ft / 6.83 m
Lift Height - Vpat Blade
27.10 ft / 8.26 m
Maximum Angle - Vpat Blade
25 deg
Maximum Tilt - Vpat Blade
15.30 in / 389 mm
Cooling System
5.50 gal / 20.8 L
Crankcase - With Filter
3.40
Drum Capacity - Optional Cable
257
Drum Capacity - Recommended Cable
371
Final Drive - Each - Lgp
5.70
Final Drive - Each - Xl
3.90
Maximum Digging Depth
13.30 ft / 4.05 m
Maximum Line Pull - Full Drum
25,000 lb / 11,340 kg
Net Power
65 hp / 48.5 kW
Rope Diameter - Optional
0.80 in / 20 mm
Rope Diameter - Recommended
0.70 in / 18 mm
Transmission - Hydraulic Tank
12 gal / 45.4 L
Winch Length
27.80 ft / 8.47 m
Undercarriage
Ground Contact Area
31,528,614.56 in² / 203,410,009.7 cm²
Ground Contact Area - Lgp
4,352
Ground Contact Area - Xl
3,153
Ground Pressure
6 psi / 0.4 bar
Ground Pressure - Lgp
4 psi / 0.3 bar
Ground Pressure - Xl
5 psi / 0.4 bar
Height
6.50 ft / 1.98 m
Length - Track On Ground - Lgp
87 in / 2,210 mm
Length - Track On Ground - Xl
87 in / 2,210 mm
Maximum Ground Clearance Under Tip
16.20 ft / 4.94 m
Maximum Reach - Ground Line
25 ft / 7.62 m
Number Of Shanks
3
Number Of Shoes Per Side
41
Number of Track Rollers per Side
7
Overall Width
67.30 in / 1,709 mm
Shoe Width - Lgp
25 ft / 7.62 m
Shoe Width - Xl
18 ft / 5.49 m
Standard Shoe Size
18.12 in / 460 mm
Track Gauge
4.92 ft / 1.50 m
Track Gauge - Lgp
66 ft / 20.12 m
Track Gauge - Xl
59 ft / 17.98 m
Frequently Asked Questions
What is the operating weight of the Caterpillar D4G? +
The Caterpillar D4G has an operating weight of 18,210 lb (8,260 kg). This places it in a class suited for crawler tractor applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar D4G engine? +
The Caterpillar D4G produces 87 hp (64.9 kW) of engine power. This output is typical for its weight class and designed to handle demanding Crawler Tractor work cycles efficiently.
What is the maximum digging depth of the Caterpillar D4G? +
The Caterpillar D4G has a maximum digging depth of 13.30 ft (4.05 m). This makes it suitable for trenching, foundation work, and other excavation tasks requiring vertical reach.
How does the Caterpillar D4G compare to similar Crawler Tractor models? +
You can compare the Caterpillar D4G side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.