Overview
The Caterpillar D8T WH is a crawler tractor listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 310 hp, operating weight of 85,150 lb and fuel capacity of 170.0 gal. This model can be reviewed for pulling power, implement matching, agricultural operations, and equipment comparison. Use the full specifications table to compare the Caterpillar D8T WH against similar crawler tractor models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
85,150
lb
Net Power
310
hp
Gross Power
347
hp
Full Specifications
87 specs
Dimensions
Ground Clearance
2.03 ft / 0.62 m
Height - Grouser
3.10 ft / 0.94 m
Height - Rops/Canopy
11.35 ft / 3.46 m
Height - Stripped Top
8.76 ft / 2.67 m
Height - Top Of Roof-Mounted Precleaner
145.20 in / 3,688 mm
Height to Top of Cab
11.35 ft / 3.46 m
Length - Basic Tractor - Tag Link Trunnion To Tip - Rear Grouser*
183 in / 4,648 mm
Length - Basic Tractor - With Striker Bars With Two Counterweights*
206 lb / 94 kg
Length - Track On Ground
10.53 ft / 3.21 m
Length of Track on Ground
10.53 ft / 3.21 m
Length w/ Blade
19.99 ft / 6.09 m
Length w/o Blade
15.22 ft / 4.64 m
Lgp Su-Blade Capacity With Trash Rack
27.60 in / 701 mm
Machine Height - Grouser Tip - Erops (Top Of Railing)
140.40 in / 3,566 mm
Machine Height - Grouser Tip - Exhaust Stack
129.70 in / 3,294 mm
Machine Height - Grouser Tip - Ground Clearance
24.10 ft / 7.35 m
Machine Height - Grouser Tip - Length Of Track On Ground
126.20 in / 3,205 mm
Overall Length - Basic Tractor
15.22 ft / 4.64 m
Overall Length - With Blade
240 in / 6,096 mm
Su - Blade Width
12.90 ft / 3.93 m
Su-Blade Capacity - With Trash Rack
26.10 in / 663 mm
Track Gauge
92 ft / 28.04 m
Track Width
1.84 ft / 0.56 m
U-Blade Capacity With Trash Rack
32.40 in / 823 mm
U-Blade Width
14 ft / 4.27 m
Width - Over Trunnions
10 ft / 3.05 m
Width - Tractor - Over Trunnions
130.40 in / 3,312 mm
Width - With Blade
155 in / 3,937 mm
Width - Without Blade
120 in / 3,048 mm
Width - Without Trunnions - Standard Shoe
8.66 ft / 2.64 m
Width Over Tracks
8.66 ft / 2.64 m
Without Trunnions - Standard Shoe Width
130 in / 3,302 mm
Engine
1 Forward
2.10 mph / 3.4 km/h
1 Reverse
2.80 mph / 4.5 km/h
1.0 Forward
2.10
1.0 Reverse
2.80
2 Forward
3.80 mph / 6.1 km/h
2 Reverse
5 mph / 8.0 km/h
2.0 Forward
3.80
2.0 Reverse
5
3 Forward
6.60 mph / 10.6 km/h
3 Reverse
8.80 mph / 14.2 km/h
3.0 Forward
6.60
3.0 Reverse
8.80
Alternator Supplied Amperage
100 A
Bore
5.40 in / 137 mm
Displacement
928 cu in / 15.2 L
Emissions
Tier 4 Final/Stage IV/Korea Tier 4
Engine Make
2236
Engine Model
C15 ACERT
Flywheel Power
335 hp / 249.8 kW
Fuel Capacity
170 gal / 643.5 L
Fuel Tank
170 gal / 643.5 L
Gross Power
347 hp / 258.8 kW
Net Power
310 hp / 231.2 kW
Net Power - 1,900 Rpm - Iso 9249/Sae J1349
312 hp / 232.7 kW
Net Power - 1,900 Rpm - Iso 9249/Sae J1349 (Din)
317 hp / 236.4 kW
Net Power - Maximum - Iso 9249/Sae J1349 At 1,700 Rpm
335 hp / 249.8 kW
Net Power - Maximum - Iso 9249/Sae J1349 Din At 1,700 Rpm
343 hp / 255.8 kW
Note (1)
All non road Tier 4 Interim and Final, Stage IIIB and IV, and Korea Tier 4 diesel engines are required to use only Ultra Low Sulfur Diesel (ULSD) fuels containing 15 ppm EPA/10 ppm EU (mg/kg) sulfur o
Number of Cylinders
6
Operating Voltage
24 V
Operating Weight
85,150 lb / 38,623 kg
Power Measured @
2,000 rpm
Stroke
6.80 in / 173 mm
Transmission
1 Forward
Width
12.90 ft / 3.93 m
Hydraulics
Capacity
26.10 yd³ / 19.95 m³
Fops
SAE J/ISO 3349 APR98 Level II, ISO 3449:1992 Level II
Rops
SAE J1040 MAY94, ISO 3471:1994
Other
8 Su Landfill
25.60
8 Su Lgp Landfill
28.90
8 U Landfill
27.70
Each Additional Shank
732
Lgp Waste Handler
91,600
Net Power
310 hp / 231.2 kW
Standard Waste Handler
86,710
Undercarriage
Ground Contact Area
5,549 in² / 35,799.9 cm²
Ground Contact Area - Lgp
9,610
Number of Track Rollers per Side
8
Standard Shoe Size
22 in / 559 mm
Track Gauge
6.84 ft / 2.08 m
Track Gauge - Lgp
92 ft / 28.04 m
Track On Ground - Lgp
126
Track Rollers/Side
8
Track Rollers/Side - Lgp
8
Width - Shoe - Lgp
38 ft / 11.58 m
Frequently Asked Questions
What is the operating weight of the Caterpillar D8T WH? +
The Caterpillar D8T WH has an operating weight of 85,150 lb (38,623 kg). This places it in a class suited for crawler tractor applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar D8T WH engine? +
The Caterpillar D8T WH produces 347 hp (258.8 kW) of engine power. This output is typical for its weight class and designed to handle demanding Crawler Tractor work cycles efficiently.
How does the Caterpillar D8T WH compare to similar Crawler Tractor models? +
You can compare the Caterpillar D8T WH side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.