John Deere Construction & Forestry · Wheel Loader

John Deere 624J Waste Handler High-Lift Specs

/5 · ratings Be the first to rate ✓ Thanks!

John Deere...

Overview

The John Deere Construction & Forestry John Deere 624J Waste Handler High-Lift is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 198 hp, operating weight of 39,715 lb, fuel capacity of 93.0 gal and hydraulic capacity of 32.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the John Deere Construction & Forestry John Deere 624J Waste Handler High-Lift against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.

Key Specifications

Operating Weight
39,715
lb

Net Power
198
hp

Bucket Capacity - Heaped
4
yd3

Full Specifications

44 specs

Dimensions

Breakout Force 23,137 lb / 10,495 kg

Bucket Capacity - Heaped 4 yd³ / 3.06 m³

Bucket Capacity - Struck 3.50 yd³ / 2.68 m³

Bucket Width 9.58 ft / 2.92 m

Dump Clearance At Max Raise 10.83 ft / 3.30 m

Ground Clearance 1.56 ft / 0.48 m

Height to Top of Cab 11.17 ft / 3.40 m

Hinge Pin - Max Height 14.33 ft / 4.37 m

Length With Bucket On Ground 24.75 ft / 7.54 m

Reach At Max Lift And Dump 5.92 ft / 1.80 m

Wheelbase 9.92 ft / 3.02 m

Width Over Tires 8.42 ft / 2.57 m

Engine

Alternator Supplied Amperage 80 A

Cooling System Fluid Capacity 7.20 gal / 27.3 L

Displacement 414 cu in / 6.8 L

Engine Make 2240

Engine Model 6068H

Engine Oil Fluid Capacity 5.60 gal / 21.2 L

Front Axle/Diff Fluid Capacity 5.90 gal / 22.3 L

Fuel Capacity 93 gal / 352.0 L

Hydraulic System Fluid Capacity 32 gal / 121.1 L

Max Speed - Forward 15.20 mph / 24.5 km/h

Max Speed - Reverse 16 mph / 25.7 km/h

Max Torque 617 lb-ft / 837 Nm

Net Power 198 hp / 147.6 kW

Number of Cylinders 6

Number of Forward Gears 3

Number of Reverse Gears 3

Operating Voltage 24 V

Operating Weight 39,715 lb / 18,014 kg

Power Measured @ 1,800 rpm

Rear Axle Oscillation 16 lb / 7 kg

Rear Axle/Diff Fluid Capacity 4.50 gal / 17.0 L

Static Tipping Weight 24,754 lb / 11,228 kg

Tire Size 20.50 in / 521 mm

Torque Measured @ 1,600 rpm

Torque Rise 55 lb-ft / 75 Nm

Transmission Fluid Capacity 6.10 gal / 23.1 L

Turning Radius 17 ft / 5.18 m

Hydraulics

Dump Time 1.30 sec

Lower Time 2.70 sec

Pump Flow Capacity 60 gal/min / 227.1 L/min

Raise Time 5.90 sec

Relief Valve Setting 3,675 psi / 253.4 bar

Related Machines

Related Guides & Articles

Mar 14, 2026

Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?

Read article →

Mar 17, 2026

Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation

Read article →

Mar 17, 2026

Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K

Read article →

Frequently Asked Questions

What is the operating weight of the John Deere Construction & Forestry John Deere 624J Waste Handler High-Lift? +

The John Deere Construction & Forestry John Deere 624J Waste Handler High-Lift has an operating weight of 39,715 lb (18,014 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.

How powerful is the John Deere Construction & Forestry John Deere 624J Waste Handler High-Lift engine? +

The John Deere Construction & Forestry John Deere 624J Waste Handler High-Lift produces 198 hp (147.6 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.

How does the John Deere Construction & Forestry John Deere 624J Waste Handler High-Lift compare to similar Wheel Loader models? +

You can compare the John Deere Construction & Forestry John Deere 624J Waste Handler High-Lift side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.