John Deere Construction & Forestry · Wheel Loader

John Deere 744J Waste Handler Specs

/5 · ratings Be the first to rate ✓ Thanks!

John Deere...

Overview

The John Deere Construction & Forestry John Deere 744J Waste Handler is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 266 hp, operating weight of 66,086 lb, fuel capacity of 122.0 gal and hydraulic capacity of 38.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the John Deere Construction & Forestry John Deere 744J Waste Handler against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.

Key Specifications

Operating Weight
66,086
lb

Net Power
266
hp

Bucket Capacity - Heaped
6
yd3

Full Specifications

44 specs

Dimensions

Breakout Force 32,691 lb / 14,828 kg

Bucket Capacity - Heaped 6 yd³ / 4.59 m³

Bucket Capacity - Struck 5.30 yd³ / 4.05 m³

Bucket Width 10.67 ft / 3.25 m

Dump Clearance At Max Raise 9.08 ft / 2.77 m

Ground Clearance 1.65 ft / 0.50 m

Height to Top of Cab 11.67 ft / 3.56 m

Hinge Pin - Max Height 14.17 ft / 4.32 m

Length With Bucket On Ground 27.83 ft / 8.48 m

Reach At Max Lift And Dump 3.93 ft / 1.20 m

Wheelbase 11.17 ft / 3.40 m

Width Over Tires 10.50 ft / 3.20 m

Engine

Alternator Supplied Amperage 80 A

Cooling System Fluid Capacity 10.10 gal / 38.2 L

Displacement 766 cu in / 12.6 L

Engine Make 2240

Engine Model 6125H

Engine Oil Fluid Capacity 10.10 gal / 38.2 L

Front Axle/Diff Fluid Capacity 13 gal / 49.2 L

Fuel Capacity 122 gal / 461.8 L

Hydraulic System Fluid Capacity 38 gal / 143.8 L

Max Speed - Forward 13.10 mph / 21.1 km/h

Max Speed - Reverse 19.30 mph / 31.1 km/h

Max Torque 970 lb-ft / 1,315 Nm

Net Power 266 hp / 198.4 kW

Number of Cylinders 6

Number of Forward Gears 3

Number of Reverse Gears 3

Operating Voltage 24 V

Operating Weight 66,086 lb / 29,976 kg

Power Measured @ 2,000 rpm

Rear Axle Oscillation 16 lb / 7 kg

Rear Axle/Diff Fluid Capacity 13 gal / 49.2 L

Static Tipping Weight 47,099 lb / 21,364 kg

Tire Size 31.50 in / 800 mm

Torque Measured @ 1,100 rpm

Torque Rise 40 lb-ft / 54 Nm

Transmission Fluid Capacity 7.40 gal / 28.0 L

Turning Radius 20.20 ft / 6.16 m

Hydraulics

Dump Time 1.50 sec

Lower Time 3 sec

Pump Flow Capacity 104 gal/min / 393.7 L/min

Raise Time 6.50 sec

Relief Valve Setting 3,200 psi / 220.6 bar

Related Machines

Related Guides & Articles

Mar 14, 2026

Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?

Read article →

Mar 17, 2026

Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation

Read article →

Mar 17, 2026

Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K

Read article →

Frequently Asked Questions

What is the operating weight of the John Deere Construction & Forestry John Deere 744J Waste Handler? +

The John Deere Construction & Forestry John Deere 744J Waste Handler has an operating weight of 66,086 lb (29,976 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.

How powerful is the John Deere Construction & Forestry John Deere 744J Waste Handler engine? +

The John Deere Construction & Forestry John Deere 744J Waste Handler produces 266 hp (198.4 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.

How does the John Deere Construction & Forestry John Deere 744J Waste Handler compare to similar Wheel Loader models? +

You can compare the John Deere Construction & Forestry John Deere 744J Waste Handler side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.