Overview
The Komatsu WA320PZ-6 is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include operating weight of 34,050 lb, fuel capacity of 64.8 gal and hydraulic capacity of 45.50 gal/min. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the Komatsu WA320PZ-6 against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
34,050.40
lb
Full Specifications
54 specs
Dimensions
Bucket Width
9 ft / 2.74 m
Ground Clearance
1.40 ft / 0.43 m
Height to Top of Cab
10.50 ft / 3.20 m
Length
305.12 in / 7,750 mm
Length With Bucket On Ground
24.30 ft / 7.41 m
Minimum Turning Radius At The Centre Of Outside Tire
17.70 ft / 5.39 m
Wheelbase
9.95 ft / 3.03 m
Width Over Tires
8.50 ft / 2.59 m
Engine
Bore
4.30 in / 109 mm
Displacement
408 cu in / 6.7 L
Engine Make
2238
Engine Model
SAA6D107E-1
Engine Type
Water-cooled, 4-cycle
Fuel Tank
64.80 gal / 245.3 L
Horsepower, Gross-Sae J1995
171 hp / 127.4 kW
Horsepower, Net-Iso 9249
168 hp / 125.1 kW
Horsepower, Net-Sae J1349
168 hp / 125.1 kW
Max Speed - Forward
23.70 mph / 38.1 km/h
Max Speed - Reverse
14.70 mph / 23.7 km/h
Maximum Speeds, Fwd / Rev
23.70 mph / 38.1 km/h
Number Of Speeds - Forward
4
Number Of Speeds - Reverse
4
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
4
Operating Weight
34,050 lb / 15,445 kg
Piston Displacement
408 cu in / 6.7 L
Power Measured @
2,000 rpm
Rear
Center-pin support, semi-floating, 24 ̊ total oscillation
Stroke
4.90 in / 124 mm
Hydraulics
15720 kgf
45
Axle Each (Front & Rear)
6 lb / 3 kg
Bore
2.80 in / 71 mm
Bucket Cylinde Bore
7.10 in / 180 mm
Bucket Cylinde Stroke
22 in / 559 mm
Control Valve
3-spool type
Dump Clearance, @45 Degrees Dump Angle
9.20 ft / 2.80 m
Dump Reach, @45 Degrees Dump Angle
3.60 ft / 1.10 m
Dump Time
1.90 sec
Engine Oil
6.10 gal / 23.1 L
Lift Cylinder
2
Lift Cylinder Bore
5.60 in / 142 mm
Lift Cylinder Stroke
28.80 in / 732 mm
Loader Control_Capcity
16.20
Lower Time
3.30 sec
Number Of Cylinders
2
Pump Flow Capacity
45.50 gal/min / 172.2 L/min
Raise Time
5.60 sec
Standard Bucket Capacity – Sae
4 yd³ / 3.06 m³
Standard Fitment Size
20.50
Static Tipping Load,Full Turn
21,153 lb / 9,595 kg
Stroke
17.90 in / 455 mm
Torque Converter, Transmission And Retarder Cooling
2 lb-ft / 2 Nm
Other
Cooling System
6.70 gal / 25.4 L
Related Machines
Related Guides & Articles
Mar 14, 2026
Wheel Loader vs Skid Steer: Which Machine Fits Your Job Best?
Read article →
Mar 17, 2026
Inside the Power of Two Giant Cat 990 Wheel Loaders – Massive Coal Loading Operation
Read article →
Mar 17, 2026
Ultimate Guide to Mega Machines: Excavators, Haulers, Wheel Loaders & Bulldozers in 4K
Read article →
Frequently Asked Questions
What is the operating weight of the Komatsu WA320PZ-6? +
The Komatsu WA320PZ-6 has an operating weight of 34,050 lb (15,445 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How does the Komatsu WA320PZ-6 compare to similar Wheel Loader models? +
You can compare the Komatsu WA320PZ-6 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.