Caterpillar 930G Integrated Tool Carrier Specs
Overview
The Caterpillar 930G Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 150 hp, operating weight of 27,964 lb, travel speed of 23.7 mph, fuel capacity of 59.5 gal and hydraulic capacity of 33.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 930G Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
27,963.50
lb
Net Power
152
hp
Gross Power
161
hp
Bucket Capacity - Heaped
2.50
yd3
Full Specifications
121 specs
Dimensions
Breakout Force
30,349 lb / 13,766 kg
Bucket Capacity - Struck
2.30 yd³ / 1.76 m³
Bucket Clearance-Maximum Lift/Carry
11.50 ft / 3.51 m
Bucket Pin Height - Maximum Lift
12.60 ft / 3.84 m
Bucket Width
8.40 ft / 2.56 m
Carry Height
1.20 ft / 0.37 m
Centerline Of Front Axle To Hitch
4.70 in / 119 mm
Digging Depth
5 ft / 1.52 m
Dump Angle At Maximum Lift
45 deg
Dump Clearance At Max Lift
9.60 ft / 2.93 m
Dump Clearance At Maximum Lift - 45 Degrees
9.10 ft / 2.77 m
Fork Tine Length
3.94 ft / 1.20 m
Ground Clearance
1.20 ft / 0.37 m
Height - Center Of Axle
2.10 ft / 0.64 m
Height - Top Of Exhaust Stack
10.40 ft / 3.17 m
Height - Top Of Hood
85.20 in / 2,164 mm
Height - Top Of Rops/Fops
10.50 ft / 3.20 m
Height to Top of Cab
10.76 ft / 3.28 m
Hinge Pin Max Height
13.29 ft / 4.05 m
Hook Height At Max Lift - Extended
25.39 ft / 7.74 m
Hook Height At Max Lift - Standard
22.44 ft / 6.84 m
Hook Reach At Max Lift - Extended
5.87 ft / 1.79 m
Hook Reach At Max Lift - Standard
7.30 ft / 2.23 m
Length - Rear Axle To Bumper
6.40 ft / 1.95 m
Length W/ Bucket On Ground
24.28 ft / 7.40 m
Length With Out Forks On Ground
25.14 ft / 7.66 m
Max Lift Height
12.76 ft / 3.89 m
Overall Height
16.90 ft / 5.15 m
Overall Height - Bucket Raised
16.90 ft / 5.15 m
Overall Length
23.60 ft / 7.19 m
Rack Back Angle - Carry
51 deg
Rack Back Angle - Ground
50 deg
Rack Back Angle - Maximum Lift
58 deg
Reach At Max Height And Dump
3.55 ft / 1.08 m
Reach At Maximum Lift And 45 Degrees Dump
3.60 ft / 1.10 m
Tread Width
7.90 ft / 2.41 m
Wheel Base
9.20 in / 234 mm
Wheel Base Length
9.20 ft / 2.80 m
Wheelbase
9.52 ft / 2.90 m
Width - Over Tires
8 ft / 2.44 m
Width Over Tires
8.06 ft / 2.46 m
Engine
Alternator Supplied Amperage
80 A
Articulation Angle
40 deg
Axle Oscillation
11 lb / 5 kg
Bore
4 in / 102 mm
Cooling System Fluid Capacity
10.60 gal / 40.1 L
Displacement
366 cu in / 6.0 L
Eec 80/1269 (1)
150
Eec 80/1269 (2)
161
Engine Make
2236
Engine Model
366 in / 9,296 mm
Engine Oil Capacity
4.30 gal / 16.3 L
Forward - 1
4.50 mph / 7.2 km/h
Front
6.9
Front Diff Fluid Capacity
6.90 gal / 26.1 L
Fuel Capacity
59.50 gal / 225.2 L
Fuel Tank
59.40 gal / 224.9 L
Gross Power
161 hp / 120.1 kW
Hydraulic Output At 2300 Engine Rpm And 6900 Kpa (1000 Psi)
17.60 gal/min / 66.6 L/min
Hydraulic System Fluid Capacity
33.10 gal / 125.3 L
Hydraulic Tank
18.50 gal / 70.0 L
Iso 9249 (1997) (1)
150
Iso 9249 (1997) (2)
161
Max Speed Forward
23.70 mph / 38.1 km/h
Max Speed Reverse
15.60 mph / 25.1 km/h
Maximum Net Power - 2000 Rpm
159 hp / 118.6 kW
Maximum Weight
29,044 lb / 13,174 kg
Maximum Working Pressure
3,500 psi / 241.3 bar
Minimum Turning Radius - Over Tires
207 ft / 63.09 m
Net Power
150 hp / 112.0 kW
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
27,964 lb / 12,684 kg
Optional Counterweight
1,036 lb / 470 kg
Rated Net Power
149 hp / 111.1 kW
Rear
6.6
Rear Diff Fluid Capacity
6.70 gal / 25.4 L
Reverse - 1
4.50 mph / 7.2 km/h
Sae J1349 (1)
149
Sae J1349 (2)
159
Size
17.50
Static Tipping Load - Bucket
20,834 lb / 9,450 kg
Static Tipping Load - Forks
15,944 lb / 7,232 kg
Static Tipping Load - Material Handler
8,212 lb / 3,725 kg
Steering Angle - Each Direction
40 deg
Steering Articulation
40
Steering Cylinder, Two, Bore
2.80 in / 71 mm
Stroke
5 in / 127 mm
Transmission
2
Transmission Fluid Capacity
9.20 gal / 34.8 L
Turning Radius
17.30 ft / 5.27 m
Width
8.40 ft / 2.56 m
Hydraulics
Bucket Capacity - Heaped
2.80 yd³ / 2.14 m³
Dump Time
1.70 sec
Fops
SAE J/ISO 3449 APR98 Level II, ISO 3449 1992 Level II
Lower Time
2.80 sec
Pump Flow Capacity
58.20 gal/min / 220.3 L/min
Raise Time
5 sec
Relief Valve Setting
3,757 psi / 259.0 bar
Rops
SAE J1040 MAY94, ISO 3471-1994
Other
Dump Clearance
9.30 ft / 2.83 m
Dump Clearance At Full Lift And 45 Degrees Dump Angle
9.70 ft / 2.96 m
Reach - Full Lift And 45 Degrees Dump
3.60 ft / 1.10 m
Static Tipping Load - Full Turn
18,029 lb / 8,178 kg
9.5 s
1
Bore (1)
4.50 in / 114 mm
Bore (2)
6 in / 152 mm
Bucket Capacity - Heaped
2.50 yd³ / 1.91 m³
Cooling System
10.60 gal / 40.1 L
Crankcase
4.20 gal / 15.9 L
Hydraulic Cycle Time
9.50
Hydraulic System - Including Tank
33 gal / 124.9 L
Net Power
152 hp / 113.3 kW
Pump Flow - Implement Pump
58 gal/min / 219.6 L/min
Raise
5
Relief Pressure - Implement Pump
3,755 psi / 258.9 bar
Stroke (1)
30.60 in / 777 mm
Stroke (2)
37 in / 940 mm
Total
9.50
Transmission
9.1
Frequently Asked Questions
What is the operating weight of the Caterpillar 930G Integrated Tool Carrier? +
The Caterpillar 930G Integrated Tool Carrier has an operating weight of 29,044 lb (13,174 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 930G Integrated Tool Carrier engine? +
The Caterpillar 930G Integrated Tool Carrier produces 161 hp (120.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Caterpillar 930G Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +
You can compare the Caterpillar 930G Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.