Caterpillar IT38G Integrated Tool Carrier Specs
Overview
The Caterpillar IT38G Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 160 hp, operating weight of 32,156 lb, travel speed of 24.1 mph, fuel capacity of 67.9 gal and hydraulic capacity of 20.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar IT38G Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
32,156
lb
Net Power
142
hp
Gross Power
180
hp
Bucket Capacity - Heaped
2.40
yd3
Full Specifications
94 specs
Dimensions
B-Pin Height - Standard
13.32 ft / 4.06 m
Breakout Force
28,575 lb / 12,961 kg
Bucket Capacity - Struck
2.40 yd³ / 1.83 m³
Centerline Of Rear Axle To Hitch
59.40 in / 1,509 mm
Centerline Rear Axle To Edge Of Counterweight
6.09 in / 155 mm
Dump Clearance At Max Lift
8.83 ft / 2.69 m
Fork Tine Length
4 ft / 1.22 m
Ground Clearance
1.31 ft / 0.40 m
Height - Top Of Exhaust Pipe
127.08 in / 3,228 mm
Height - Top Of Hood
92.88 in / 2,359 mm
Height - Top Of Rops
10.83 ft / 3.30 m
Height to Top of Cab
10.83 ft / 3.30 m
Hinge Pin Max Height
13.33 ft / 4.06 m
Hook Height At Max Lift - Extended
22 ft / 6.71 m
Hook Height At Max Lift - Standard
18.33 ft / 5.59 m
Hook Reach At Max Lift - Extended
11.75 ft / 3.58 m
Hook Reach At Max Lift - Standard
8 ft / 2.44 m
Length W/ Bucket On Ground
25 ft / 7.62 m
Length With Out Forks On Ground
26 ft / 7.92 m
Max Lift Height
11.75 ft / 3.58 m
Reach At Max Height And Dump
4.17 ft / 1.27 m
Wheel Base
9.91 in / 252 mm
Wheelbase
9.92 ft / 3.02 m
Width Over Tires
8.50 ft / 2.59 m
Engine
69 %
70,020
Alternator Supplied Amperage
80 A
Bore
4.30 in / 109 mm
Cooling System Fluid Capacity
11.40 gal / 43.2 L
Displacement
439 cu in / 7.2 L
Engine Make
2236
Engine Model
3126B ATAAC
Engine Oil Capacity
7.90 gal / 29.9 L
Flywheel Power
160 hp / 119.3 kW
Flywheel Power - Din 70020
166
Forward - 1
4.70 mph / 7.6 km/h
Forward - 2
8.60 mph / 13.8 km/h
Forward - 3
14.80 mph / 23.8 km/h
Forward - 4
24.30 mph / 39.1 km/h
Front Diff Fluid Capacity
6.30 gal / 23.8 L
Fuel Capacity
67.90 gal / 257.0 L
Gross Power
180 hp / 134.2 kW
Hydraulic System Fluid Capacity
20.10 gal / 76.1 L
Hydraulic Tank
20.10 gal / 76.1 L
Max Speed Forward
24.10 mph / 38.8 km/h
Max Speed Reverse
14.50 mph / 23.3 km/h
Max Torque
619 lb-ft / 839 Nm
Maximum Bucket Capacity
3.30 yd³ / 2.52 m³
Maximum Flywheel Power
172
Net Power
160 hp / 119.3 kW
Net Power - 80/1269/Eec
160 hp / 119.3 kW
Net Power - Iso 9249
160 hp / 119.3 kW
Net Power - Sae J1349
160 hp / 119.3 kW
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
32,156 lb / 14,586 kg
Peak Torque - 1,200 Rpm - Net
645 lb-ft / 875 Nm
Rear
Oscillating rear (? 13?)
Rear Axle Oscillation
12 lb / 5 kg
Rear Diff Fluid Capacity
7.10 gal / 26.9 L
Reverse - 1
4.70 mph / 7.6 km/h
Reverse - 2
8.60 mph / 13.8 km/h
Reverse - 3
24.30 mph / 39.1 km/h
Static Tipping Load - Bucket
22,515 lb / 10,213 kg
Static Tipping Load - Forks
18,306 lb / 8,303 kg
Static Tipping Load - Material Handler
12,136 lb / 5,505 kg
Stroke
5 in / 127 mm
Torque Rise
62 lb-ft / 84 Nm
Total Torque Rise
69 lb-ft / 94 Nm
Transmission Fluid Capacity
7.90 gal / 29.9 L
Turning Radius
20.10 ft / 6.13 m
Width
9 ft / 2.74 m
Hydraulics
Bucket Capacity - Heaped
2.80 yd³ / 2.14 m³
Bucket/Work Tool System - Relief Valve Setting
3,600 psi / 248.2 bar
Dump Time
2 sec
Hydraulic Cycle Time - Dump
2
Hydraulic Cycle Time - Raise
5.80
Hydraulic Cycle Time - Total
10.70
Lower Time
2.90 sec
Maximum Single-Wheel Rise And Fall
16.50
Pump Flow Capacity
43 gal/min / 162.8 L/min
Raise Time
5.80 sec
Relief Valve Setting
3,597 psi / 248.0 bar
Other
Dump Clearance
9.20 ft / 2.80 m
Static Tipping Load - Full Turn
16,800 lb / 7,620 kg
Bucket Capacity - Heaped
2.40 yd³ / 1.83 m³
Cooling System
12.70 gal / 48.1 L
Crankcase
5.30 gal / 20.1 L
Differential - Final Drives - Front
6.3
Differential - Final Drives - Rear
7.1
Fuel Tank - Standard
67 gal / 253.6 L
Hydraulic System - Including Tank
23.80 gal / 90.1 L
Net Power
142 hp / 105.9 kW
Transmission
7.9
Frequently Asked Questions
What is the operating weight of the Caterpillar IT38G Integrated Tool Carrier? +
The Caterpillar IT38G Integrated Tool Carrier has an operating weight of 32,156 lb (14,586 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar IT38G Integrated Tool Carrier engine? +
The Caterpillar IT38G Integrated Tool Carrier produces 180 hp (134.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Caterpillar IT38G Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +
You can compare the Caterpillar IT38G Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.