Caterpillar IT62H Integrated Tool Carrier Specs
Overview
The Caterpillar IT62H Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 211 hp, operating weight of 42,770 lb, travel speed of 23.6 mph, fuel capacity of 83.0 gal and hydraulic capacity of 29.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar IT62H Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
42,770
lb
Net Power
207
hp
Gross Power
230
hp
Bucket Capacity - Heaped
4.40
yd3
Full Specifications
117 specs
Dimensions
B-Pin Height - Standard
13.53 ft / 4.12 m
Breakout Force
35,775 lb / 16,227 kg
Bucket Capacity - Struck
3.50 yd³ / 2.68 m³
Bucket Width
9.50 ft / 2.90 m
Centerline Of Rear Axle To Hitch
66 in / 1,676 mm
Centerline Rear Axle To Edge Of Counterweight
6.56 in / 167 mm
Dump Clearance At Max Lift
9.17 ft / 2.80 m
Fork Tine Length
5 ft / 1.52 m
Ground Clearance
1.35 ft / 0.41 m
Height - Top Of Exhaust Pipe
132.60 in / 3,368 mm
Height - Top Of Hood
96.96 in / 2,463 mm
Height - Top Of Rops
11.33 ft / 3.45 m
Height to Top of Cab
11.33 ft / 3.45 m
Hinge Pin Max Height
13.50 ft / 4.11 m
Hook Height At Max Lift - Extended
24.92 ft / 7.60 m
Hook Height At Max Lift - Standard
20.43 ft / 6.23 m
Hook Height At Maximum Lift - Extended
24.89 ft / 7.59 m
Hook Height At Maximum Lift - Mid-Position
22.67 ft / 6.91 m
Hook Height At Maximum Lift - Retracted
20.45 ft / 6.23 m
Hook Height At Minimum Lift - Extended
10.38 ft / 3.16 m
Hook Height At Minimum Lift - Mid-Position
8.33 ft / 2.54 m
Hook Height At Minimum Lift - Retracted
6.28 ft / 1.91 m
Hook Height With Lift Arm Level
6 ft / 1.83 m
Hook Reach At Max Lift - Extended
9.58 ft / 2.92 m
Hook Reach At Max Lift - Standard
6.75 ft / 2.06 m
Hook Reach At Maximum Lift - Extended
10.47 ft / 3.19 m
Hook Reach At Maximum Lift - Mid-Position
8.82 ft / 2.69 m
Hook Reach At Maximum Lift - Retracted
7.18 ft / 2.19 m
Hook Reach At Minimum Lift - Extended
10.47 ft / 3.19 m
Hook Reach At Minimum Lift - Mid-Position
8.82 ft / 2.69 m
Hook Reach At Minimum Lift - Retracted
7.18 ft / 2.19 m
Hook Reach With Lift Arm Level - Extended
18.24 ft / 5.56 m
Hook Reach With Lift Arm Level - Mid-Position
15.62 ft / 4.76 m
Hook Reach With Lift Arm Level - Retracted
13 ft / 3.96 m
Length W/ Bucket On Ground
27.92 ft / 8.51 m
Length With Out Forks On Ground
29.92 ft / 9.12 m
Max Lift Height
12.50 ft / 3.81 m
Overall Length - With Fork Level On Ground
29.91 ft / 9.12 m
Overall Reach With Lift Arm And Fork Level
6.39 ft / 1.95 m
Rack Back - Carry
51
Rack Back - Ground
44
Reach At Max Height And Dump
4 ft / 1.22 m
Tine Height At Maximum Lift With Fork Level
12.52 ft / 3.82 m
Tine Height With Lift Arm And Fork Level
5.76 ft / 1.76 m
Wheel Base
10.99 in / 279 mm
Wheelbase
11 ft / 3.35 m
Width Over Tires
9.17 ft / 2.80 m
Engine
Alternator Supplied Amperage
80 A
Bore
4.40 in / 112 mm
Breakout Force - Reference Bucket
35,775 lb / 16,227 kg
Capacity - Reference Bucket
4.30
Cooling System Fluid Capacity
11 gal / 41.6 L
Displacement
439 cu in / 7.2 L
Engine Make
2236
Engine Model
C7 ACERT
Engine Oil Capacity
7.90 gal / 29.9 L
Flywheel Power
212 hp / 158.0 kW
Forward - 1
4.30 mph / 6.9 km/h
Forward - 2
8.10 mph / 13.0 km/h
Forward - 3
14 mph / 22.5 km/h
Forward - 4
23.60 mph / 38.0 km/h
Front Diff Fluid Capacity
9.50 gal / 36.0 L
Fuel Capacity
83 gal / 314.2 L
Gross Power
230 hp / 171.5 kW
Gross Power - Sae J1995
230 hp / 171.5 kW
Hydraulic System Fluid Capacity
29 gal / 109.8 L
Hydraulic Tank
29 gal / 109.8 L
Max Speed Forward
23.60 mph / 38.0 km/h
Max Speed Reverse
24.90 mph / 40.1 km/h
Max Torque
669 lb-ft / 907 Nm
Maximum Bucket Capacity
5.50 yd³ / 4.21 m³
Net Power
211 hp / 157.3 kW
Net Power - 80/1269/Eec
211 hp / 157.3 kW
Net Power - Iso 9249
211 hp / 157.3 kW
Net Power - Sae J1349
209 hp / 155.9 kW
Number of Forward Gears
4
Number of Reverse Gears
4
Operating Voltage
24 V
Operating Weight
42,770 lb / 19,400 kg
Peak Torque - 1,400 Rpm - Net
669 lb-ft / 907 Nm
Rear
Oscillating +/- 13?
Rear Axle Oscillation
13 lb / 6 kg
Rear Diff Fluid Capacity
9.50 gal / 36.0 L
Reverse - 1
4.70 mph / 7.6 km/h
Reverse - 2
8.60 mph / 13.8 km/h
Reverse - 3
15.20 mph / 24.5 km/h
Reverse - 4
24.90 mph / 40.1 km/h
Static Tipping Load - Bucket
29,602 lb / 13,427 kg
Static Tipping Load - Forks
20,667 lb / 9,374 kg
Static Tipping Load - Material Handler
16,163 lb / 7,331 kg
Stroke
5 in / 127 mm
Transmission Fluid Capacity
9 gal / 34.1 L
Turning Radius
22.10 ft / 6.74 m
Width
9.50 ft / 2.90 m
Hydraulics
Bucket Capacity - Heaped
4.30 yd³ / 3.29 m³
Bucket/Work Tool System - Pump Output
71 gal/min / 268.8 L/min
Dump Time
2.10 sec
Hydraulic Cycle Time - Dump
2.10
Hydraulic Cycle Time - Raise
6
Hydraulic Cycle Time - Total
10.70
Lower Time
2.60 sec
Maximum Single-Wheel Rise And Fall
18.50
Pilot System - Pump Output
71.33 gal/min / 270.0 L/min
Pump Flow Capacity
71 gal/min / 268.8 L/min
Raise Time
6 sec
Other
Dump Clearance
9,137.20 ft / 2,785.02 m
Static Tipping Load - Full Turn
25,860 lb / 11,730 kg
Static Tipping Load - Full Turn - Bucket
25,865 lb / 11,732 kg
Static Tipping Load - Full Turn - Forks
17,516 lb / 7,945 kg
Bucket Capacity - Heaped
4.40 yd³ / 3.36 m³
Cooling System
11 gal / 41.6 L
Crankcase
7.90 gal / 29.9 L
Differential - Final Drives - Front
9.5
Differential - Final Drives - Rear
9.5
Fuel Tank - Standard
83 gal / 314.2 L
Net Power
207 hp / 154.4 kW
Transmission
9
Frequently Asked Questions
What is the operating weight of the Caterpillar IT62H Integrated Tool Carrier? +
The Caterpillar IT62H Integrated Tool Carrier has an operating weight of 42,770 lb (19,400 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar IT62H Integrated Tool Carrier engine? +
The Caterpillar IT62H Integrated Tool Carrier produces 230 hp (171.5 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Caterpillar IT62H Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +
You can compare the Caterpillar IT62H Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.