Caterpillar IT38H Integrated Tool Carrier Specs
Overview
The Caterpillar IT38H Integrated Tool Carrier is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 178 hp, operating weight of 35,283 lb, travel speed of 26.9 mph, fuel capacity of 65.3 gal and hydraulic capacity of 23.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar IT38H Integrated Tool Carrier against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
35,282.80
lb
Net Power
190
hp
Gross Power
197.20
hp
Bucket Capacity - Heaped
4
yd3
Full Specifications
87 specs
Dimensions
Breakout Force
28,326 lb / 12,848 kg
Bucket Capacity - Struck
3.10 yd³ / 2.37 m³
Dump Clearance At Max Lift
9.21 ft / 2.81 m
Fork Tine Length
5 ft / 1.52 m
Ground Clearance
1.31 ft / 0.40 m
Height At Hook Max Reach
6.10 ft / 1.86 m
Height to Top of Cab
11.02 ft / 3.36 m
Hinge Pin Max Height
12.91 ft / 3.93 m
Hook Height At Max Lift - Extended
22.07 ft / 6.73 m
Hook Height At Max Lift - Standard
18.37 ft / 5.60 m
Hook Max Reach - Extended
17.62 ft / 5.37 m
Hook Max Reach - Standard
12.37 ft / 3.77 m
Hook Reach At Max Lift - Extended
11.75 ft / 3.58 m
Hook Reach At Max Lift - Standard
8.03 ft / 2.45 m
Length W/ Bucket On Ground
24.75 ft / 7.54 m
Length With Out Forks On Ground
27.38 ft / 8.35 m
Max Lift Height
11.64 ft / 3.55 m
Reach At Max Height And Dump
3.78 ft / 1.15 m
Wheelbase
9.91 ft / 3.02 m
Width Over Tires
8.78 ft / 2.68 m
Engine
--
JCB 456ZX
Alternator Supplied Amperage
65 A
Bore
4.10 in / 104 mm
Cooling System Fluid Capacity
9.60 gal / 36.3 L
Displacement
403 cu in / 6.6 L
Engine Make
2236
Engine Model
6.6 Acert
Engine Oil Capacity
4.60 gal / 17.4 L
Forward - 1
5 mph / 8.0 km/h
Forward - 2
9.10 mph / 14.6 km/h
Forward - 3
15.80 mph / 25.4 km/h
Forward - 4
26.80 mph / 43.1 km/h
Front Diff Fluid Capacity
15.10 gal / 57.2 L
Fuel Capacity
65.30 gal / 247.2 L
Gross Power
197 hp / 147.1 kW
Gross Power - Sae J1995
197 hp / 146.9 kW
Hydraulic System Fluid Capacity
23.60 gal / 89.3 L
Hydraulic Tank
23.50 gal / 89.0 L
Max Speed Forward
26.90 mph / 43.3 km/h
Max Speed Reverse
15.90 mph / 25.6 km/h
Max Torque
620 lb-ft / 841 Nm
Maximum Bucket Capacity
4 yd³ / 3.06 m³
Net Power
178 hp / 133.0 kW
Net Power - 80/1269/Eec
180 hp / 134.2 kW
Net Power - Iso 9249
180 hp / 134.2 kW
Net Power - Sae J1349
178 hp / 132.7 kW
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
35,283 lb / 16,004 kg
Peak Torque - 1,400 Rpm - Net
620 lb-ft / 841 Nm
Power Measured @
2,100 rpm
Rear
Oscillating +/-12?
Rear Axle Oscillation
12 lb / 5 kg
Rear Diff Fluid Capacity
14.10 gal / 53.4 L
Reverse - 1
5 mph / 8.0 km/h
Reverse - 2
9.10 mph / 14.6 km/h
Reverse - 3
15.80 mph / 25.4 km/h
Static Tipping Load - Bucket
23,918 lb / 10,849 kg
Static Tipping Load - Forks
19,546 lb / 8,866 kg
Static Tipping Load - Material Handler
11,599 lb / 5,261 kg
Stroke
5 in / 127 mm
Torque Measured @
1,400 rpm
Torque Rise
38 lb-ft / 52 Nm
Total Torque Rise
38 lb-ft / 52 Nm
Transmission Fluid Capacity
11.40 gal / 43.2 L
Turning Radius
20 ft / 6.10 m
Hydraulics
Bucket Capacity - Heaped
4 yd³ / 3.06 m³
Dump Time
2 sec
Hydraulic Cycle Time - Dump
1.40
Hydraulic Cycle Time - Raise
5.40
Hydraulic Cycle Time - Total
9.50
Lower Time
2.70 sec
Maximum Single-Wheel Rise And Fall
17
Pilot System - Pump Output
77.90 gal/min / 294.9 L/min
Pump Flow Capacity
78 gal/min / 295.3 L/min
Raise Time
5 sec
Relief Valve Setting
1,000 psi / 68.9 bar
Other
Static Tipping Load - Full Turn
22,207 lb / 10,073 kg
Bucket Capacity - Heaped
4 yd³ / 3.06 m³
Cooling System
9.50 gal / 36.0 L
Crankcase
4.60 gal / 17.4 L
Differential - Final Drives - Front
15.1
Differential - Final Drives - Rear
14
Fuel Tank - Standard
65.30 gal / 247.2 L
Net Power
190 hp / 141.7 kW
Transmission
11.4
Frequently Asked Questions
What is the operating weight of the Caterpillar IT38H Integrated Tool Carrier? +
The Caterpillar IT38H Integrated Tool Carrier has an operating weight of 35,283 lb (16,004 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar IT38H Integrated Tool Carrier engine? +
The Caterpillar IT38H Integrated Tool Carrier produces 197 hp (147.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Caterpillar IT38H Integrated Tool Carrier compare to similar Integrated Tool Carrier models? +
You can compare the Caterpillar IT38H Integrated Tool Carrier side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.