Overview
The Michigan L70 is a integrated tool carrier listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 110 hp, operating weight of 21,320 lb, travel speed of 23.9 mph, fuel capacity of 48.9 gal and hydraulic capacity of 34.4 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Michigan L70 against similar integrated tool carrier models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
21,320
lb
Net Power
110
hp
Gross Power
118
hp
Bucket Capacity - Heaped
2.30
yd3
Full Specifications
55 specs
Dimensions
Breakout Force
23,920 lb / 10,850 kg
Bucket Capacity - Struck
2 yd³ / 1.53 m³
Dump Clearance At Max Lift
9.19 ft / 2.80 m
Fork Tine Length
4.02 ft / 1.23 m
Ground Clearance
1.22 ft / 0.37 m
Height At Hook Max Reach
5.06 ft / 1.54 m
Height to Top of Cab
9.62 ft / 2.93 m
Hinge Pin Max Height
12.18 ft / 3.71 m
Hook Height At Max Lift - Extended
22.54 ft / 6.87 m
Hook Height At Max Lift - Standard
19.49 ft / 5.94 m
Hook Reach At Max Lift - Extended
9.65 ft / 2.94 m
Hook Reach At Max Lift - Standard
7.52 ft / 2.29 m
Length W/ Bucket On Ground
21.82 ft / 6.65 m
Length With Out Forks On Ground
22 ft / 6.71 m
Max Lift Height
11.75 ft / 3.58 m
Reach At Max Height And Dump
3.45 ft / 1.05 m
Wheelbase
9.32 ft / 2.84 m
Width Over Tires
7.62 ft / 2.32 m
Engine
Alternator Supplied Amperage
60 A
Cooling System Fluid Capacity
7.20 gal / 27.3 L
Displacement
273 cu in / 4.5 L
Engine Make
2244
Engine Model
TD 45B
Engine Oil Capacity
2.80 gal / 10.6 L
Front Diff Fluid Capacity
6.90 gal / 26.1 L
Fuel Capacity
48.90 gal / 185.1 L
Gross Power
118 hp / 88.0 kW
Hydraulic System Fluid Capacity
34.40 gal / 130.2 L
Max Speed Forward
23.90 mph / 38.5 km/h
Max Speed Reverse
14.50 mph / 23.3 km/h
Max Torque
325 lb-ft / 440 Nm
Net Power
110 hp / 82.0 kW
Number of Cylinders
4
Number of Forward Gears
4
Number of Reverse Gears
3
Operating Voltage
24 V
Operating Weight
21,320 lb / 9,671 kg
Power Measured @
2,200 rpm
Rear Axle Oscillation
26 lb / 12 kg
Rear Diff Fluid Capacity
6 gal / 22.7 L
Static Tipping Load - Bucket
15,140 lb / 6,867 kg
Static Tipping Load - Forks
8,819 lb / 4,000 kg
Static Tipping Load - Material Handler
4,850 lb / 2,200 kg
Torque Measured @
1,400 rpm
Transmission Fluid Capacity
5.90 gal / 22.3 L
Transmission Type
Volvo BM HT 90 automatic powershift
Turning Radius
18.30 ft / 5.58 m
Width
8 ft / 2.44 m
Hydraulics
Bucket Capacity - Heaped
2.30 yd³ / 1.76 m³
Dump Time
1.70 sec
Lower Time
2.40 sec
Net Power
110 hp / 82.0 kW
Pump Flow Capacity
45 gal/min / 170.3 L/min
Raise Time
5.10 sec
Relief Valve Setting
2,975 psi / 205.1 bar
Related Machines
Frequently Asked Questions
What is the operating weight of the Michigan L70? +
The Michigan L70 has an operating weight of 21,320 lb (9,671 kg). This places it in a class suited for integrated tool carrier applications where ground pressure and transport weight are key considerations.
How powerful is the Michigan L70 engine? +
The Michigan L70 produces 118 hp (88.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Integrated Tool Carrier work cycles efficiently.
How does the Michigan L70 compare to similar Integrated Tool Carrier models? +
You can compare the Michigan L70 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.