Overview
The Caterpillar 950H is a wheel loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 197 hp, operating weight of 40,435 lb, fuel capacity of 83.0 gal and hydraulic capacity of 29.0 gal. This model can be reviewed for loading, stockpile work, material handling, yard operations, and fleet comparison workflows. Use the full specifications table to compare the Caterpillar 950H against similar wheel loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
40,435
lb
Net Power
197
hp
Gross Power
175
hp
Bucket Capacity - Heaped
4
yd3
Full Specifications
93 specs
Dimensions
B-Pin Height - Carry - High-Lift
1.94 ft / 0.59 m
B-Pin Height - Carry - Standard
1.49 ft / 0.45 m
B-Pin Height - High-Lift
14.73 ft / 4.49 m
B-Pin Height - Standard
13.10 ft / 3.99 m
Breakout Force
37,125 lb / 16,840 kg
Bucket Capacity - Heaped
4 yd³ / 3.06 m³
Bucket Capacity - Struck
3.47 yd³ / 2.65 m³
Bucket Width
9.58 ft / 2.92 m
Centerline Of Rear Axle To Hitch
66 in / 1,676 mm
Centerline Rear Axle To Edge Of Counterweight
6.41 in / 163 mm
Dump Angle At Maximum Lift
48.20 deg
Dump Clearance At Max Raise
9.58 ft / 2.92 m
Ground Clearance
1.35 ft / 0.41 m
Height - Center Line Of Axle
2.46 ft / 0.75 m
Height - Top Of Exhaust Pipe
132.60 in / 3,368 mm
Height - Top Of Hood
96.96 in / 2,463 mm
Height - Top Of Rops
11.30 ft / 3.44 m
Height to Top of Cab
11.33 ft / 3.45 m
Hinge Pin - Max Height
13.08 ft / 3.99 m
Length With Bucket On Ground
26.17 ft / 7.98 m
Rack Back - Carry
45
Rack Back - Ground
38.50
Rack Back - Maximum Lift
59.50
Reach At Max Lift And Dump
3.92 ft / 1.19 m
Wheel Base
10.99 in / 279 mm
Wheelbase
11 ft / 3.35 m
Width Over Tires
9.17 ft / 2.80 m
Engine
Alternator Supplied Amperage
80 A
Bore
4.40 in / 112 mm
Breakout Force - Reference Bucket
37,125 lb / 16,840 kg
Capacity - Reference Bucket
4
Cooling System Fluid Capacity
11 gal / 41.6 L
Displacement
439 cu in / 7.2 L
Engine Make
2236
Engine Model
C7 ACERT
Engine Oil Fluid Capacity
7.90 gal / 29.9 L
Flywheel Power
197 hp / 146.9 kW
Forward - 1
4.30 mph / 6.9 km/h
Forward - 2
7.90 mph / 12.7 km/h
Forward - 3
13.90 mph / 22.4 km/h
Forward - 4
23 mph / 37.0 km/h
Front Axle/Diff Fluid Capacity
9.50 gal / 36.0 L
Fuel Capacity
83 gal / 314.2 L
Gross Power
217 hp / 161.8 kW
Gross Power - Sae J1995
217 hp / 161.8 kW
Hydraulic System Fluid Capacity
29 gal / 109.8 L
Hydraulic Tank
29 gal / 109.8 L
Max Speed - Forward
23 mph / 37.0 km/h
Max Speed - Reverse
24.90 mph / 40.1 km/h
Max Torque
669 lb-ft / 907 Nm
Maximum Bucket Capacity
4.50 yd³ / 3.44 m³
Net Power
197 hp / 146.9 kW
Net Power - 80/1269/Eec
197 hp / 146.9 kW
Net Power - Iso 9249
197 hp / 146.9 kW
Net Power - Sae J1349
195 hp / 145.4 kW
Number of Cylinders
6
Number of Forward Gears
4
Number of Reverse Gears
4
Operating Voltage
24 V
Operating Weight
40,435 lb / 18,341 kg
Peak Torque - 1,400 Rpm - Net
669 lb-ft / 907 Nm
Power Measured @
1,800 rpm
Rear
Oscillating +/- 13?
Rear Axle Oscillation
26 lb / 12 kg
Rear Axle/Diff Fluid Capacity
9.50 gal / 36.0 L
Reverse - 1
4.70 mph / 7.6 km/h
Reverse - 2
8.60 mph / 13.8 km/h
Reverse - 3
15.20 mph / 24.5 km/h
Reverse - 4
24.90 mph / 40.1 km/h
Static Tipping Weight
27,483 lb / 12,466 kg
Stroke
5 in / 127 mm
Transmission Fluid Capacity
9 gal / 34.1 L
Turning Radius
23 ft / 7.01 m
Hydraulics
Bucket/Work Tool System - Pump Output
71 gal/min / 268.8 L/min
Dump Time
1.30 sec
Hydraulic Cycle Time - Dump
1.30
Hydraulic Cycle Time - Raise
6.20
Hydraulic Cycle Time - Total
10
Lower Time
2.50 sec
Maximum Single-Wheel Rise And Fall
18.50
Pump Flow Capacity
71 gal/min / 268.8 L/min
Raise Time
6.20 sec
Relief Valve Setting
1,000 psi / 68.9 bar
Other
Dump Clearance
9.60 ft / 2.93 m
Static Tipping Load - Full Turn - Bucket
24,068 lb / 10,917 kg
Static Tipping Load - Full Turn - Forks
9,421 lb / 4,273 kg
Cooling System
11 gal / 41.6 L
Crankcase
7.90 gal / 29.9 L
Differential - Final Drives - Front
9.5
Differential - Final Drives - Rear
9.5
Fuel Tank - Standard
83 gal / 314.2 L
Gross Power
175 hp / 130.5 kW
Transmission
9
Videos 1
Related Machines
Frequently Asked Questions
What is the operating weight of the Caterpillar 950H? +
The Caterpillar 950H has an operating weight of 40,435 lb (18,341 kg). This places it in a class suited for wheel loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 950H engine? +
The Caterpillar 950H produces 217 hp (161.8 kW) of engine power. This output is typical for its weight class and designed to handle demanding Wheel Loader work cycles efficiently.
How does the Caterpillar 950H compare to similar Wheel Loader models? +
You can compare the Caterpillar 950H side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.