Overview
The Bobcat S300 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 81 hp, capacity of 0.6 yd³, travel speed of 12.0 mph, fuel capacity of 23.0 gal and hydraulic capacity of 20.70 gal/min. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Bobcat S300 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Gross Power
81
hp
Bucket Capacity
0.60
yd3
Full Specifications
23 specs
Dimensions
Clearance At Max Lift And Dump
8.29 ft / 2.53 m
Height to Top of Cab
6.75 ft / 2.06 m
Length W/O Bucket
9.55 ft / 2.91 m
Length With Bucket
11.91 ft / 3.63 m
Reach At Max Lift And Dump
34 ft / 10.36 m
Turning Radius From Center - Machine Rear
84.20 ft / 25.66 m
Wheelbase
4.03 ft / 1.23 m
Width Over Tires
6.01 ft / 1.83 m
Engine
Bucket Capacity
0.60 yd³ / 0.46 m³
Displacement
201 cu in / 3.3 L
Engine Make
2334
Engine Model
V3300-DI-T
Fuel Capacity
23 gal / 87.1 L
Gross Power
81 hp / 60.4 kW
Max Speed
12 mph / 19.3 km/h
Number of Cylinders
4
Operating Load Rating
3,000 lb / 1,361 kg
Operating Speed
6.90 mph / 11.1 km/h
Operational Weight
8,448 lb / 3,832 kg
Power Measured @
2,400 rpm
Relief Valve Pressure
3,300 psi / 227.5 bar
Tipping Angle
6,111 deg
Hydraulics
Pump Flow Capacity
20.70 gal/min / 78.4 L/min
Frequently Asked Questions
How powerful is the Bobcat S300 engine? +
The Bobcat S300 produces 81 hp (60.4 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Bobcat S300 compare to similar Skid Steer Loader models? +
You can compare the Bobcat S300 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.