Overview
The Caterpillar 242B is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 57 hp, operating weight of 6,802 lb, travel speed of 7.5 mph, fuel capacity of 17.2 gal and hydraulic capacity of 14.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 242B against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
6,802
lb
Net Power
57
hp
Gross Power
62
hp
Full Specifications
76 specs
Dimensions
Breakout Force
4,059 lb / 1,841 kg
Bucket Pin Height - Carry Position
12 ft / 3.66 m
Bucket Pin Height - Maximum Lift
10 ft / 3.05 m
Bumper Overhang - Rear Axle
39 lb / 18 kg
Clearance At Max Lift And Dump
7.45 ft / 2.27 m
Clearance At Maximum Lift And Dump
88 ft / 26.82 m
Ground Clearance
7 ft / 2.13 m
Height - Top Of Cab
6.50 ft / 1.98 m
Height to Top of Cab
6.52 ft / 1.99 m
Length - With Bucket On Ground
135 in / 3,429 mm
Length - Without Bucket
109 in / 2,769 mm
Length W/O Bucket
9.06 ft / 2.76 m
Length With Bucket
11.28 ft / 3.44 m
Maximum Overall Height
155 in / 3,937 mm
Maximum Reach - With Arms Parallel
48.40 ft / 14.75 m
Reach - Maximum Lift/Dump
30 ft / 9.14 m
Reach At Max Lift And Dump
30.16 ft / 9.19 m
Turn Radius From Center - Bucket
87.40 ft / 26.64 m
Turn Radius From Center - Coupler
56.50 ft / 17.22 m
Turn Radius From Center - Rear
60.80 ft / 18.53 m
Turning Radius From Center - Inc Bucket
87.45 ft / 26.65 m
Turning Radius From Center - Machine Rear
60.83 ft / 18.54 m
Vehicle Width Over Tires
66 in / 1,676 mm
Wheel Base
3.59 in / 91 mm
Wheelbase
3.59 ft / 1.09 m
Width Over Tires
5.50 ft / 1.68 m
Engine
Alternator Supplied Amperage
85 A
Bore
3.30 in / 84 mm
Cat 3024C T
Engine Power - Iso 14396
Chain Box Fluid Capacity - Each Side
1.60 gal / 6.1 L
Cooling System Fluid Capacity
2.70 gal / 10.2 L
Engine Make
2236
Engine Model
3024C T
Engine Oil Fluid Capacity
2.20 gal / 8.3 L
Engine Power - Iso 14396
61 hp / 45.5 kW
Fuel Capacity
17.20 gal / 65.1 L
Fuel Tank
17 gal / 64.4 L
Gross Power
62 hp / 46.2 kW
Gross Power - Sae J1995
62 hp / 46.2 kW
Hydraulic System Fluid Capacity
14.60 gal / 55.3 L
Hydraulic Tank
9.20 gal / 34.8 L
Max Speed
7.50 mph / 12.1 km/h
Net Flywheel Power
57 hp / 42.5 kW
Net Power
58 hp / 43.0 kW
Net Power - Eec 80/1269
57 hp / 42.5 kW
Net Power - Iso 9249 Eec
57 hp / 42.5 kW
Net Power - Sae 1349
57 hp / 42.5 kW
Operating Load Rating
2,000 lb / 907 kg
Operating Voltage
12 V
Operating Weight
6,802 lb / 3,085 kg
Operating Weight - Hf
6,895 lb / 3,128 kg
Operational Weight
6,801 lb / 3,085 kg
Relief Valve Pressure
3,336 psi / 230.0 bar
Stroke
3.90 in / 99 mm
Tipping Angle
3,999.20 deg
Travel Speed Forward
7.40 mph / 11.9 km/h
Travel Speed Reverse
7.40 mph / 11.9 km/h
Hydraulics
Chain Box - Each Side
1.60
Fops
SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii
SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
Hydraulic Power (1)
30 hp / 22.7 kW
Hydraulic Power (2)
51 hp / 37.7 kW
Loader Hydraulic Flow
15.60 gal/min / 59.1 L/min
Loader Hydraulic Pressure
3,335 psi / 229.9 bar
Maximum Loader Hydraulic Flow
26 gal/min / 98.4 L/min
Net Power
57 hp / 42.5 kW
Pump Flow Capacity
15.90 gal/min / 60.2 L/min
Rops
SAE J1040 MAY94 and ISO3471:1994
Other
Breakout Force - Lift Cylinder
3,841 lb / 1,742 kg
Breakout Force - Lift Cylinder (Hf)
3,818 lb / 1,732 kg
Breakout Force - Tilt Cylinder
4,059 lb / 1,841 kg
Rated Operating Capacity
2,000 lb / 907 kg
Rated Operating Capacity With Optional Counterweight
2,047 lb / 929 kg
Tipping Load
4,000 lb / 1,814 kg
Cooling System
2.60 gal / 9.8 L
Engine Crankcase
2.10 gal / 7.9 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 242B? +
The Caterpillar 242B has an operating weight of 6,802 lb (3,085 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 242B engine? +
The Caterpillar 242B produces 62 hp (46.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 242B compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 242B side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.