Overview
The Caterpillar 262D is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 70.7 hp, operating weight of 8,011 lb, travel speed of 7.7 mph, fuel capacity of 24.9 gal and hydraulic capacity of 13.8 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 262D against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
8,011
lb
Net Power
70.70
hp
Gross Power
74.30
hp
Full Specifications
76 specs
Dimensions
Bucket Pin Height - Carry Position
7.90 ft / 2.41 m
Bucket Pin Height - Maximum Lift
10.41 ft / 3.17 m
Bucket Pin Reach - Maximum Lift
15.50 ft / 4.72 m
Bumper Overhang - Rear Axle
43 lb / 19 kg
Clearance At Max Lift And Dump
7.81 ft / 2.38 m
Clearance At Maximum Lift And Dump
93.70 ft / 28.56 m
Ground Clearance
8.90 ft / 2.71 m
Height - Top Of Cab
6.93 ft / 2.11 m
Height to Top of Cab
6.93 ft / 2.11 m
Hinge Pin Height - Fully Raised
124.89 in / 3,172 mm
Length - With Bucket On Ground
146.20 in / 3,713 mm
Length - Without Bucket
117.90 in / 2,995 mm
Length W/O Bucket
9.83 ft / 3.00 m
Length With Bucket
12.19 ft / 3.72 m
Maximum Overall Height
157.81 in / 4,008 mm
Maximum Reach - With Arms Parallel
50.90 ft / 15.51 m
Reach - Maximum Lift/Dump
30.90 ft / 9.42 m
Reach At Max Lift And Dump
30.95 ft / 9.43 m
Turn Radius From Center - Bucket
85.90 ft / 26.18 m
Turn Radius From Center - Coupler
55.20 ft / 16.82 m
Turn Radius From Center - Rear
71.10 ft / 21.67 m
Turning Radius From Center - Inc Bucket
85.87 ft / 26.17 m
Turning Radius From Center - Machine Rear
71.07 ft / 21.66 m
Vehicle Width Over Tires
66 in / 1,676 mm
Wheel Base
4.10 in / 104 mm
Wheelbase
4.10 ft / 1.25 m
Engine
Alternator Supplied Amperage
80 A
Bore
3.70 in / 94 mm
Chain Box Fluid Capacity - Each Side
3.40 gal / 12.9 L
Cooling System Fluid Capacity
3.70 gal / 14.0 L
Displacement
203 cu in / 3.3 L
Engine Model
Cat C3.3B DIT (turbo)
Fuel Capacity
24.90 gal / 94.3 L
Fuel Tank
24.80 gal / 93.9 L
Gross Power
74 hp / 55.4 kW
Gross Power - Sae J1995
74 hp / 55.4 kW
Hydraulic System Fluid Capacity
13.80 gal / 52.2 L
Hydraulic Tank
10.30 gal / 39.0 L
Max Speed
7.70 mph / 12.4 km/h
Max Torque
196 lb-ft / 265 Nm
Net Flywheel Power
73 hp / 54.4 kW
Net Power
73 hp / 54.4 kW
Net Power - Iso 9249 Eec
74 hp / 55.0 kW
Net Power - Sae 1349
73 hp / 54.4 kW
Operating Voltage
12 V
Operating Weight
8,011 lb / 3,634 kg
Operational Weight
8,012 lb / 3,634 kg
Standard
Hydraulic Flow (2)
Stroke
4.70 in / 119 mm
Tire Size
12 in / 305 mm
Torque Measured @
1,500 rpm
Travel Speed Forward
7.70 mph / 12.4 km/h
Travel Speed Forward - 2-Speed Option
11 mph / 17.7 km/h
Travel Speed Reverse
7.70 mph / 12.4 km/h
Travel Speed Reverse - 2-Speed Option
11 mph / 17.7 km/h
Hydraulics
Chain Box - Each Side
3.30
Fops
ISO 3449:2005 Level I
Fops Level Ii
ISO 3449:2005 Level II
Hydraulic Power - Calculated (1)
44 hp / 32.8 kW
Hydraulic Power - Calculated (2)
76 hp / 56.7 kW
Inside Cab*
81
Loader Hydraulic Flow (1)
23 gal/min / 87.1 L/min
Loader Hydraulic Flow (2)
32 gal/min / 121.1 L/min
Loader Hydraulic Pressure (1)
3,335 psi / 229.9 bar
Loader Hydraulic Pressure (2)
4,061 psi / 280.0 bar
Net Power
71 hp / 52.7 kW
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The so
Outside Cab**
101
Pump Flow Capacity
32 gal/min / 121.1 L/min
Rops
ISO 3471:2008
Other
Breakout Force - Tilt Cylinder
7,355 lb / 3,336 kg
Rated Operating Capacity
2,700 lb / 1,225 kg
Rated Operating Capacity With Optional Counterweight
2,950 lb / 1,338 kg
Tipping Load
5,400 lb / 2,449 kg
Cooling System
3.70 gal / 14.0 L
Engine Crankcase
3 gal / 11.4 L
Related Machines
Related Guides & Articles
Frequently Asked Questions
What is the operating weight of the Caterpillar 262D? +
The Caterpillar 262D has an operating weight of 8,011 lb (3,634 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 262D engine? +
The Caterpillar 262D produces 74 hp (55.4 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 262D compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 262D side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.