Overview
The Caterpillar 242B Series 3 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 73 hp, operating weight of 7,008 lb, travel speed of 11.5 mph, fuel capacity of 15.4 gal and hydraulic capacity of 14.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 242B Series 3 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
7,008
lb
Net Power
73
hp
Gross Power
74
hp
Full Specifications
76 specs
Dimensions
Breakout Force
4,507 lb / 2,044 kg
Bucket Pin Height - Carry Position
9 ft / 2.74 m
Bucket Pin Height - Maximum Lift
10.09 ft / 3.08 m
Bucket Pin Reach - Maximum Lift
10 ft / 3.05 m
Bumper Overhang - Rear Axle
39 lb / 18 kg
Clearance At Max Lift And Dump
7.66 ft / 2.33 m
Clearance At Maximum Lift And Dump
92 ft / 28.04 m
Ground Clearance
7 ft / 2.13 m
Height - Top Of Cab
6.59 ft / 2.01 m
Height to Top of Cab
6.63 ft / 2.02 m
Length - With Bucket On Ground
135.31 in / 3,437 mm
Length - Without Bucket
108.70 in / 2,761 mm
Length W/O Bucket
9.06 ft / 2.76 m
Length With Bucket
11.28 ft / 3.44 m
Maximum Overall Height
154 in / 3,912 mm
Maximum Reach - With Arms Parallel
48 ft / 14.63 m
Reach - Maximum Lift/Dump
24 ft / 7.32 m
Reach At Max Lift And Dump
24.49 ft / 7.46 m
Turn Radius From Center - Bucket
82 ft / 24.99 m
Turn Radius From Center - Coupler
52 ft / 15.85 m
Turn Radius From Center - Rear
61 ft / 18.59 m
Turning Radius From Center - Inc Bucket
82.37 ft / 25.11 m
Turning Radius From Center - Machine Rear
61.26 ft / 18.67 m
Vehicle Width Over Tires
66 in / 1,676 mm
Wheel Base
3.60 in / 91 mm
Wheelbase
3.59 ft / 1.09 m
Width Over Tires
5.50 ft / 1.68 m
Engine
Alternator Supplied Amperage
90 A
Bore
3.70 in / 94 mm
Cat 3.4 DIT
Net Power - Iso 9249 Eec
Chain Box Fluid Capacity - Each Side
1.60 gal / 6.1 L
Cooling System Fluid Capacity
2.70 gal / 10.2 L
Displacement
201 cu in / 3.3 L
Engine Make
2236
Engine Model
C3.4DIT
Engine Oil Fluid Capacity
2.40 gal / 9.1 L
Fuel Capacity
15.40 gal / 58.3 L
Fuel Tank
15.30 gal / 57.9 L
Gross Power
74 hp / 55.2 kW
Gross Power - Sae J1995
74 hp / 55.2 kW
Hydraulic System Fluid Capacity
14.60 gal / 55.3 L
Hydraulic Tank
9.20 gal / 34.8 L
Max Speed
11.50 mph / 18.5 km/h
Net Flywheel Power
71 hp / 52.9 kW
Net Power
71 hp / 52.9 kW
Net Power - Iso 9249 Eec
71 hp / 52.9 kW
Net Power - Sae 1349
71 hp / 52.9 kW
Operating Load Rating
2,150 lb / 975 kg
Operating Speed
7.80 mph / 12.6 km/h
Operating Voltage
12 V
Operating Weight
7,008 lb / 3,179 kg
Operational Weight
7,008 lb / 3,179 kg
Relief Valve Pressure
3,335 psi / 229.9 bar
Stroke
4.70 in / 119 mm
Tipping Angle
4,300 deg
Travel Speed Forward
7.70 mph / 12.4 km/h
Travel Speed Forward - 2-Speed Option
11.40 mph / 18.3 km/h
Travel Speed Reverse
7.70 mph / 12.4 km/h
Travel Speed Reverse - 2-Speed Option
11.40 mph / 18.3 km/h
Hydraulics
Chain Box - Each Side
1.60
Fops
SAE J1043 SEPT87, ISO 3449:1992 Level I
Fops Level Ii
SAE J231 JAN81, ISO 3449:1992 Level II
Hydraulic Power
43 hp / 31.9 kW
Hydraulic Power - Calculated
60 hp / 45.0 kW
Loader Hydraulic Flow (1)
22 gal/min / 83.3 L/min
Loader Hydraulic Flow (2)
31 gal/min / 117.3 L/min
Loader Hydraulic Pressure
3,335 psi / 229.9 bar
Net Power
73 hp / 54.4 kW
Pump Flow Capacity
22 gal/min / 83.3 L/min
Rops
SAE J1040 MAY94, ISO 3471:1994
Other
Breakout Force - Tilt Cylinder
4,507 lb / 2,044 kg
Rated Operating Capacity
2,150 lb / 975 kg
Rated Operating Capacity With Optional Counterweight
2,200 lb / 998 kg
Tipping Load
4,300 lb / 1,950 kg
Cooling System
2.60 gal / 9.8 L
Engine Crankcase
2.40 gal / 9.1 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 242B Series 3? +
The Caterpillar 242B Series 3 has an operating weight of 7,008 lb (3,179 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 242B Series 3 engine? +
The Caterpillar 242B Series 3 produces 74 hp (55.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 242B Series 3 compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 242B Series 3 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.