Overview
The Caterpillar 246C is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 73.7 hp, operating weight of 7,480 lb, capacity of 0.5 yd³, travel speed of 7.7 mph, fuel capacity of 26.0 gal and hydraulic capacity of 15.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 246C against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
7,480
lb
Net Power
73.70
hp
Gross Power
74
hp
Bucket Capacity
0.50
yd3
Full Specifications
75 specs
Dimensions
Breakout Force
7,328 lb / 3,324 kg
Bucket Pin Height - Carry Position
7.80 ft / 2.38 m
Bucket Pin Height - Maximum Lift
10.25 ft / 3.12 m
Bumper Overhang - Rear Axle
43 lb / 19 kg
Clearance At Max Lift And Dump
7.95 ft / 2.42 m
Clearance At Maximum Lift And Dump
95.40 ft / 29.08 m
Ground Clearance
8.81 ft / 2.69 m
Height - Top Of Cab
6.90 ft / 2.10 m
Height to Top of Cab
6.83 ft / 2.08 m
Length - With Bucket On Ground
145.31 in / 3,691 mm
Length - Without Bucket
117.20 in / 2,977 mm
Length W/O Bucket
10.25 ft / 3.12 m
Length With Bucket
12.11 ft / 3.69 m
Maximum Overall Height
157.40 in / 3,998 mm
Maximum Reach - With Arms Parallel
54.60 ft / 16.64 m
Reach - Maximum Lift/Dump
23.60 ft / 7.19 m
Reach At Max Lift And Dump
23.60 ft / 7.19 m
Turn Radius From Center - Bucket
85.30 ft / 26.00 m
Turn Radius From Center - Coupler
54.60 ft / 16.64 m
Turn Radius From Center - Rear
68.10 ft / 20.76 m
Turning Radius From Center - Inc Bucket
94.90 ft / 28.93 m
Turning Radius From Center - Machine Rear
58.50 ft / 17.83 m
Vehicle Width Over Tires
66 in / 1,676 mm
Wheel Base
4.07 in / 103 mm
Wheelbase
4.07 ft / 1.24 m
Width Over Tires
5.50 ft / 1.68 m
Engine
Alternator Supplied Amperage
90 A
Bore
3.70 in / 94 mm
Bucket Capacity
0.50 yd³ / 0.38 m³
Chain Box Fluid Capacity - Each Side
2.60 gal / 9.8 L
Cooling System Fluid Capacity
3.70 gal / 14.0 L
Displacement
201 cu in / 3.3 L
Engine Make
2236
Engine Model
3044C DIT
Engine Oil Fluid Capacity
2.60 gal / 9.8 L
Fuel Capacity
26 gal / 98.4 L
Fuel Tank
26 gal / 98.4 L
Gross Power
74 hp / 55.2 kW
Gross Power - Sae J1995
74 hp / 55.2 kW
Hydraulic System Fluid Capacity
15 gal / 56.8 L
Hydraulic Tank
11 gal / 41.6 L
Max Speed
7.70 mph / 12.4 km/h
Net Flywheel Power
73 hp / 54.4 kW
Net Power
73 hp / 54.4 kW
Net Power - Sae 1349
73 hp / 54.4 kW
Number of Cylinders
4
Operating Load Rating
2,150 lb / 975 kg
Operating Voltage
12 V
Operating Weight
7,480 lb / 3,393 kg
Operational Weight
7,381 lb / 3,348 kg
Power Measured @
2,500 rpm
Relief Valve Pressure
3,335 psi / 229.9 bar
Stroke
4.70 in / 119 mm
Tipping Angle
4,300 deg
Travel Speed Forward
7.70 mph / 12.4 km/h
Travel Speed Forward - 2-Speed Option
12 mph / 19.3 km/h
Travel Speed Reverse
7.70 mph / 12.4 km/h
Travel Speed Reverse - 2-Speed Option
12 mph / 19.3 km/h
Hydraulics
Chain Box - Each Side
2.60
Fops
SAE J1043 SEPT87, ISO 3449:1992 Level I
Fops Level Ii
SAE J231 JAN81, ISO 3449:1992 Level II
Hydraulic Power
43 hp / 31.9 kW
Loader Hydraulic Flow
22 gal/min / 83.3 L/min
Loader Hydraulic Pressure
3,335 psi / 229.9 bar
Maximum Loader Hydraulic Flow
33 gal/min / 124.9 L/min
Maximum Loader Hydraulic Pressure
4,061 psi / 280.0 bar
Net Power
74 hp / 55.0 kW
Pump Flow Capacity
22 gal/min / 83.3 L/min
Rops
SAE J1040 MAY94, ISO 3471:1994
Other
Breakout Force - Tilt Cylinder
7,328 lb / 3,324 kg
Rated Operating Capacity
2,150 lb / 975 kg
Rated Operating Capacity With Optional Counterweight
2,350 lb / 1,066 kg
Tipping Load
4,300 lb / 1,950 kg
Cooling System
3.70 gal / 14.0 L
Engine Crankcase
2.60 gal / 9.8 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 246C? +
The Caterpillar 246C has an operating weight of 7,480 lb (3,393 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 246C engine? +
The Caterpillar 246C produces 74 hp (55.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 246C compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 246C side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.