Overview
The Caterpillar 272C is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 92 hp, operating weight of 8,362 lb, capacity of 0.6 yd³, travel speed of 7.2 mph, fuel capacity of 26.0 gal and hydraulic capacity of 15.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 272C against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
8,362
lb
Net Power
92
hp
Gross Power
94
hp
Bucket Capacity
0.60
yd3
Full Specifications
81 specs
Dimensions
Breakout Force
7,315 lb / 3,318 kg
Bucket Pin Height - Carry Position
7.80 ft / 2.38 m
Bucket Pin Height - Maximum Lift
10.76 ft / 3.28 m
Bucket Pin Reach - Maximum Lift
14.70 ft / 4.48 m
Bumper Overhang - Rear Axle
43 lb / 19 kg
Clearance At Max Lift And Dump
8.16 ft / 2.49 m
Clearance At Maximum Lift And Dump
97.90 ft / 29.84 m
Ground Clearance
8.81 ft / 2.69 m
Height - Top Of Cab
6.90 ft / 2.10 m
Height to Top of Cab
6.83 ft / 2.08 m
Length - With Bucket On Ground
150.90 in / 3,833 mm
Length - Without Bucket
122.80 in / 3,119 mm
Length W/O Bucket
10.71 ft / 3.26 m
Length With Bucket
12.50 ft / 3.81 m
Maximum Overall Height
162 in / 4,115 mm
Maximum Reach - With Arms Parallel
50 ft / 15.24 m
Reach - Maximum Lift/Dump
30.10 ft / 9.17 m
Reach At Max Lift And Dump
30 ft / 9.14 m
Turn Radius From Center - Bucket
89.10 ft / 27.16 m
Turn Radius From Center - Coupler
57.10 ft / 17.40 m
Turn Radius From Center - Rear
70.70 ft / 21.55 m
Turning Radius From Center - Inc Bucket
101.50 ft / 30.94 m
Turning Radius From Center - Machine Rear
58.30 ft / 17.77 m
Vehicle Width Over Tires
66 in / 1,676 mm
Wheel Base
4.54 in / 115 mm
Wheelbase
4.50 ft / 1.37 m
Width Over Tires
5.50 ft / 1.68 m
Engine
Alternator Supplied Amperage
90 A
Bore
3.70 in / 94 mm
Bucket Capacity
0.60 yd³ / 0.46 m³
Chain Box Fluid Capacity - Each Side
2.90 gal / 11.0 L
Cooling System Fluid Capacity
3.70 gal / 14.0 L
Displacement
201 cu in / 3.3 L
Engine Make
2236
Engine Model
3044C DIT
Engine Oil Fluid Capacity
2.60 gal / 9.8 L
Engine Power - Iso 14396
93 hp / 69.4 kW
Fuel Capacity
26 gal / 98.4 L
Fuel Tank
26 gal / 98.4 L
Gross Power
94 hp / 70.1 kW
Gross Power - Sae J1995
94 hp / 70.1 kW
Hydraulic System Fluid Capacity
15 gal / 56.8 L
Hydraulic Tank
11 gal / 41.6 L
Max Speed
7.20 mph / 11.6 km/h
Net Flywheel Power
90 hp / 67.1 kW
Net Power
90 hp / 67.1 kW
Net Power - Eec 80/1269
91 hp / 67.9 kW
Net Power - Iso 9249 Eec
91 hp / 67.9 kW
Net Power - Sae 1349
90 hp / 67.1 kW
Number of Cylinders
4
Operating Load Rating
3,250 lb / 1,474 kg
Operating Voltage
12 V
Operating Weight
8,362 lb / 3,793 kg
Operational Weight
8,292 lb / 3,761 kg
Power Measured @
2,500 rpm
Relief Valve Pressure
3,335 psi / 229.9 bar
Stroke
4.70 in / 119 mm
Tipping Angle
6,500 deg
Travel Speed Forward
7.20 mph / 11.6 km/h
Travel Speed Forward - 2-Speed Option
10 mph / 16.1 km/h
Travel Speed Reverse
7.20 mph / 11.6 km/h
Travel Speed Reverse - 2-Speed Option
10 mph / 16.1 km/h
Xdp Option Speed - With Tires
6 in / 152 mm
Xdp Option Speed - With Vts Tracks
4.70
Hydraulics
Chain Box - Each Side
2.90
Fops
SAE J1043 SEPT87, ISO 3449:1992 Level I
Fops Level Ii
SAE J231 JAN81, ISO 3449:1992 Level II
Hydraulic Power
43 hp / 31.9 kW
Loader Hydraulic Flow
22 gal/min / 83.3 L/min
Loader Hydraulic Pressure
3,335 psi / 229.9 bar
Maximum Loader Hydraulic Flow
33 gal/min / 124.9 L/min
Maximum Loader Hydraulic Pressure
4,061 psi / 280.0 bar
Net Power
92 hp / 68.6 kW
Pump Flow Capacity
22 gal/min / 83.3 L/min
Rops
SAE J1040 MAY94, ISO 3471:1994
Other
Breakout Force - Tilt Cylinder
7,315 lb / 3,318 kg
Rated Operating Capacity
3,250 lb / 1,474 kg
Rated Operating Capacity With Optional Counterweight
3,480 lb / 1,579 kg
Tipping Load
6,500 lb / 2,948 kg
Cooling System
3.70 gal / 14.0 L
Engine Crankcase
2.60 gal / 9.8 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 272C? +
The Caterpillar 272C has an operating weight of 8,362 lb (3,793 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 272C engine? +
The Caterpillar 272C produces 94 hp (70.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 272C compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 272C side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.