Overview
The CASE Construction Equipment Case 410 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 49 hp, capacity of 0.5 yd³, travel speed of 6.8 mph, fuel capacity of 22.0 gal and hydraulic capacity of 13.3 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 410 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
49
hp
Gross Power
51
hp
Bucket Capacity
0.50
yd3
Full Specifications
33 specs
Dimensions
Breakout Force
4,129 lb / 1,873 kg
Clearance At Max Lift And Dump
7.48 ft / 2.28 m
Ground Clearance
8 ft / 2.44 m
Height to Top of Cab
6.28 ft / 1.91 m
Length W/O Bucket
8.33 ft / 2.54 m
Length With Bucket
10.26 ft / 3.13 m
Reach At Max Lift And Dump
23.60 ft / 7.19 m
Turning Radius From Center - Inc Bucket
73.20 ft / 22.31 m
Turning Radius From Center - Machine Rear
57.60 ft / 17.56 m
Wheelbase
3.43 ft / 1.05 m
Width Over Tires
4.08 ft / 1.24 m
Engine
Alternator Supplied Amperage
41 A
Bucket Capacity
0.50 yd³ / 0.38 m³
Chain Box Fluid Capacity - Each Side
1.50 gal / 5.7 L
Cooling System Fluid Capacity
4.50 gal / 17.0 L
Displacement
134 cu in / 2.2 L
Engine Make
2239
Engine Model
422/M2, Tier II certified
Engine Oil Fluid Capacity
2.20 gal / 8.3 L
Fuel Capacity
22 gal / 83.3 L
Gross Power
51 hp / 38.0 kW
Hydraulic System Fluid Capacity
13.30 gal / 50.3 L
Max Speed
6.80 mph / 10.9 km/h
Net Power
49 hp / 36.5 kW
Number of Cylinders
4
Operating Load Rating
1,500 lb / 680 kg
Operating Speed
6.90 mph / 11.1 km/h
Operating Voltage
12 V
Operational Weight
5,483 lb / 2,487 kg
Power Measured @
2,900 rpm
Relief Valve Pressure
3,000 psi / 206.8 bar
Tipping Angle
3,000 deg
Hydraulics
Pump Flow Capacity
18 gal/min / 68.1 L/min
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 410 engine? +
The CASE Construction Equipment Case 410 produces 51 hp (38.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the CASE Construction Equipment Case 410 compare to similar Skid Steer Loader models? +
You can compare the CASE Construction Equipment Case 410 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.