Overview
The CASE Construction Equipment Case 410 Series III is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 56 hp, capacity of 0.5 yd³, travel speed of 6.5 mph, fuel capacity of 22.1 gal and hydraulic capacity of 13.3 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 410 Series III against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
56.40
hp
Gross Power
60.40
hp
Bucket Capacity
0.50
yd3
Full Specifications
33 specs
Dimensions
Breakout Force
3,751 lb / 1,701 kg
Clearance At Max Lift And Dump
7.52 ft / 2.29 m
Ground Clearance
8.35 ft / 2.55 m
Height to Top of Cab
6.57 ft / 2.00 m
Length W/O Bucket
8.17 ft / 2.49 m
Length With Bucket
10.27 ft / 3.13 m
Reach At Max Lift And Dump
23.63 ft / 7.20 m
Turning Radius From Center - Inc Bucket
73.41 ft / 22.38 m
Turning Radius From Center - Machine Rear
54 ft / 16.46 m
Wheelbase
3.45 ft / 1.05 m
Width Over Tires
4.93 ft / 1.50 m
Engine
Alternator Supplied Amperage
55 A
Bucket Capacity
0.50 yd³ / 0.38 m³
Chain Box Fluid Capacity - Each Side
2.10 gal / 7.9 L
Cooling System Fluid Capacity
3.10 gal / 11.7 L
Displacement
134 cu in / 2.2 L
Engine Make
2239
Engine Model
422T/M3 diesel Tier III certified
Engine Oil Fluid Capacity
2.80 gal / 10.6 L
Fuel Capacity
22.10 gal / 83.7 L
Gross Power
60 hp / 45.0 kW
Hydraulic System Fluid Capacity
13.30 gal / 50.3 L
Max Speed
6.50 mph / 10.5 km/h
Net Power
56 hp / 42.1 kW
Number of Cylinders
4
Operating Load Rating
1,501 lb / 681 kg
Operating Speed
6.50 mph / 10.5 km/h
Operating Voltage
12 V
Operational Weight
5,430 lb / 2,463 kg
Power Measured @
2,900 rpm
Relief Valve Pressure
3,050 psi / 210.3 bar
Tipping Angle
3,000.50 deg
Hydraulics
Pump Flow Capacity
19.50 gal/min / 73.8 L/min
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 410 Series III engine? +
The CASE Construction Equipment Case 410 Series III produces 60 hp (45.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the CASE Construction Equipment Case 410 Series III compare to similar Skid Steer Loader models? +
You can compare the CASE Construction Equipment Case 410 Series III side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.