Overview
The CASE Construction Equipment Case 435 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 72 hp, capacity of 0.7 yd³, travel speed of 11.7 mph, fuel capacity of 17.5 gal and hydraulic capacity of 5.9 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 435 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
72
hp
Gross Power
78
hp
Bucket Capacity
0.70
yd3
Full Specifications
31 specs
Dimensions
Clearance At Max Lift And Dump
7.55 ft / 2.30 m
Ground Clearance
9 ft / 2.74 m
Height to Top of Cab
6.67 ft / 2.03 m
Length W/O Bucket
8.60 ft / 2.62 m
Length With Bucket
11.29 ft / 3.44 m
Reach At Max Lift And Dump
29.90 ft / 9.11 m
Turning Radius From Center - Inc Bucket
80.20 ft / 24.44 m
Turning Radius From Center - Machine Rear
78.75 ft / 24.00 m
Wheelbase
3.75 ft / 1.14 m
Width Over Tires
5.09 ft / 1.55 m
Engine
Alternator Supplied Amperage
95 A
Bucket Capacity
0.70 yd³ / 0.54 m³
Chain Box Fluid Capacity - Each Side
2 gal / 7.6 L
Cooling System Fluid Capacity
4.50 gal / 17.0 L
Displacement
205 cu in / 3.4 L
Engine Make
2239
Engine Model
Family III 334T/M2, Tier II certified
Engine Oil Fluid Capacity
2.20 gal / 8.3 L
Fuel Capacity
17.50 gal / 66.2 L
Gross Power
78 hp / 58.2 kW
Hydraulic System Fluid Capacity
5.90 gal / 22.3 L
Max Speed
11.70 mph / 18.8 km/h
Net Power
72 hp / 53.7 kW
Number of Cylinders
3
Operating Load Rating
2,300 lb / 1,043 kg
Operating Voltage
12 V
Operational Weight
6,830 lb / 3,098 kg
Power Measured @
2,300 rpm
Relief Valve Pressure
3,050 psi / 210.3 bar
Tipping Angle
4,600 deg
Hydraulics
Pump Flow Capacity
21 gal/min / 79.5 L/min
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 435 engine? +
The CASE Construction Equipment Case 435 produces 78 hp (58.2 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the CASE Construction Equipment Case 435 compare to similar Skid Steer Loader models? +
You can compare the CASE Construction Equipment Case 435 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.