Overview
The CASE Construction Equipment Case 445 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 74 hp, capacity of 0.7 yd³, travel speed of 11.7 mph, fuel capacity of 17.3 gal and hydraulic capacity of 11.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 445 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
74
hp
Gross Power
80.50
hp
Bucket Capacity
0.70
yd3
Full Specifications
31 specs
Dimensions
Clearance At Max Lift And Dump
7.69 ft / 2.34 m
Ground Clearance
9 ft / 2.74 m
Height to Top of Cab
6.67 ft / 2.03 m
Length W/O Bucket
8.58 ft / 2.62 m
Length With Bucket
11.29 ft / 3.44 m
Reach At Max Lift And Dump
31.89 ft / 9.72 m
Turning Radius From Center - Inc Bucket
82.60 ft / 25.18 m
Turning Radius From Center - Machine Rear
85.83 ft / 26.16 m
Wheelbase
3.75 ft / 1.14 m
Width Over Tires
5 ft / 1.52 m
Engine
Alternator Supplied Amperage
95 A
Bucket Capacity
0.70 yd³ / 0.54 m³
Chain Box Fluid Capacity - Each Side
2 gal / 7.6 L
Cooling System Fluid Capacity
4.50 gal / 17.0 L
Displacement
274 cu in / 4.5 L
Engine Make
2239
Engine Model
Family III 445/M2, Tier II certified
Engine Oil Fluid Capacity
3.20 gal / 12.1 L
Fuel Capacity
17.30 gal / 65.5 L
Gross Power
81 hp / 60.0 kW
Hydraulic System Fluid Capacity
11 gal / 41.6 L
Max Speed
11.70 mph / 18.8 km/h
Net Power
74 hp / 55.2 kW
Number of Cylinders
4
Operating Load Rating
2,500 lb / 1,134 kg
Operating Voltage
12 V
Operational Weight
7,677 lb / 3,482 kg
Power Measured @
2,300 rpm
Relief Valve Pressure
3,050 psi / 210.3 bar
Tipping Angle
5,000 deg
Hydraulics
Pump Flow Capacity
21 gal/min / 79.5 L/min
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 445 engine? +
The CASE Construction Equipment Case 445 produces 81 hp (60.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the CASE Construction Equipment Case 445 compare to similar Skid Steer Loader models? +
You can compare the CASE Construction Equipment Case 445 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.