Overview
The CASE Construction Equipment Case 445 Series III is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 77 hp, capacity of 0.6 yd³, travel speed of 7.0 mph, fuel capacity of 17.4 gal and hydraulic capacity of 11.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 445 Series III against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
76.50
hp
Gross Power
81.90
hp
Bucket Capacity
0.60
yd3
Full Specifications
33 specs
Dimensions
Breakout Force
5,000 lb / 2,268 kg
Clearance At Max Lift And Dump
7.52 ft / 2.29 m
Ground Clearance
9.30 ft / 2.83 m
Height to Top of Cab
6.93 ft / 2.11 m
Length W/O Bucket
8.70 ft / 2.65 m
Length With Bucket
10.96 ft / 3.34 m
Reach At Max Lift And Dump
36.62 ft / 11.16 m
Turning Radius From Center - Inc Bucket
83.47 ft / 25.44 m
Turning Radius From Center - Machine Rear
53.55 ft / 16.32 m
Wheelbase
3.75 ft / 1.14 m
Width Over Tires
6.01 ft / 1.83 m
Engine
Alternator Supplied Amperage
95 A
Bucket Capacity
0.60 yd³ / 0.46 m³
Chain Box Fluid Capacity - Each Side
2.10 gal / 7.9 L
Cooling System Fluid Capacity
3.10 gal / 11.7 L
Displacement
195 cu in / 3.2 L
Engine Make
2239
Engine Model
432T/M3 diesel Tier III certified
Engine Oil Fluid Capacity
2.30 gal / 8.7 L
Fuel Capacity
17.40 gal / 65.9 L
Gross Power
82 hp / 61.1 kW
Hydraulic System Fluid Capacity
11 gal / 41.6 L
Max Speed
7 mph / 11.3 km/h
Net Power
77 hp / 57.0 kW
Number of Cylinders
4
Operating Load Rating
2,500 lb / 1,134 kg
Operating Speed
7 mph / 11.3 km/h
Operating Voltage
12 V
Operational Weight
8,120 lb / 3,683 kg
Power Measured @
2,300 rpm
Relief Valve Pressure
3,050 psi / 210.3 bar
Tipping Angle
5,000.10 deg
Hydraulics
Pump Flow Capacity
23.90 gal/min / 90.5 L/min
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 445 Series III engine? +
The CASE Construction Equipment Case 445 Series III produces 82 hp (61.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the CASE Construction Equipment Case 445 Series III compare to similar Skid Steer Loader models? +
You can compare the CASE Construction Equipment Case 445 Series III side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.