Overview
The CASE Construction Equipment Case 450 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 82 hp, capacity of 0.7 yd³, travel speed of 12.3 mph, fuel capacity of 20.7 gal and hydraulic capacity of 17.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 450 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
82
hp
Gross Power
88
hp
Bucket Capacity
0.70
yd3
Full Specifications
32 specs
Dimensions
Breakout Force
6,200 lb / 2,812 kg
Clearance At Max Lift And Dump
7.88 ft / 2.40 m
Ground Clearance
9.10 ft / 2.77 m
Height to Top of Cab
6.67 ft / 2.03 m
Length W/O Bucket
9.06 ft / 2.76 m
Length With Bucket
11.74 ft / 3.58 m
Reach At Max Lift And Dump
26.70 ft / 8.14 m
Turning Radius From Center - Inc Bucket
84.30 ft / 25.69 m
Turning Radius From Center - Machine Rear
62.20 ft / 18.96 m
Wheelbase
3.83 ft / 1.17 m
Width Over Tires
5.38 ft / 1.64 m
Engine
Alternator Supplied Amperage
95 A
Bucket Capacity
0.70 yd³ / 0.54 m³
Chain Box Fluid Capacity - Each Side
2 gal / 7.6 L
Cooling System Fluid Capacity
4.50 gal / 17.0 L
Displacement
274 cu in / 4.5 L
Engine Make
2239
Engine Model
Family III 445T/M2, Tier II certified
Engine Oil Fluid Capacity
3.20 gal / 12.1 L
Fuel Capacity
20.70 gal / 78.4 L
Gross Power
88 hp / 65.6 kW
Hydraulic System Fluid Capacity
17 gal / 64.4 L
Max Speed
12.30 mph / 19.8 km/h
Net Power
82 hp / 61.1 kW
Number of Cylinders
4
Operating Load Rating
2,450 lb / 1,111 kg
Operating Voltage
12 V
Operational Weight
8,830 lb / 4,005 kg
Power Measured @
2,300 rpm
Relief Valve Pressure
3,000 psi / 206.8 bar
Tipping Angle
4,900 deg
Hydraulics
Pump Flow Capacity
22.10 gal/min / 83.7 L/min
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 450 engine? +
The CASE Construction Equipment Case 450 produces 88 hp (65.6 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the CASE Construction Equipment Case 450 compare to similar Skid Steer Loader models? +
You can compare the CASE Construction Equipment Case 450 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.