Overview
The CASE Construction Equipment Case 450 Series III is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 83 hp, capacity of 0.7 yd³, travel speed of 6.3 mph, fuel capacity of 20.7 gal and hydraulic capacity of 17.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case 450 Series III against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
83.20
hp
Gross Power
89.90
hp
Bucket Capacity
0.70
yd3
Full Specifications
33 specs
Dimensions
Breakout Force
5,689 lb / 2,580 kg
Clearance At Max Lift And Dump
7.88 ft / 2.40 m
Ground Clearance
9.22 ft / 2.81 m
Height to Top of Cab
6.93 ft / 2.11 m
Length W/O Bucket
9.16 ft / 2.79 m
Length With Bucket
11.72 ft / 3.57 m
Reach At Max Lift And Dump
26.42 ft / 8.05 m
Turning Radius From Center - Inc Bucket
84.65 ft / 25.80 m
Turning Radius From Center - Machine Rear
53.15 ft / 16.20 m
Wheelbase
3.91 ft / 1.19 m
Width Over Tires
6.01 ft / 1.83 m
Engine
Alternator Supplied Amperage
95 A
Bucket Capacity
0.70 yd³ / 0.54 m³
Chain Box Fluid Capacity - Each Side
2.10 gal / 7.9 L
Cooling System Fluid Capacity
3.10 gal / 11.7 L
Displacement
275 cu in / 4.5 L
Engine Make
2239
Engine Model
445T/M3 diesel Tier III certified
Engine Oil Fluid Capacity
3.20 gal / 12.1 L
Fuel Capacity
20.70 gal / 78.4 L
Gross Power
90 hp / 67.0 kW
Hydraulic System Fluid Capacity
17 gal / 64.4 L
Max Speed
6.30 mph / 10.1 km/h
Net Power
83 hp / 62.0 kW
Number of Cylinders
4
Operating Load Rating
2,449 lb / 1,111 kg
Operating Speed
6.30 mph / 10.1 km/h
Operating Voltage
12 V
Operational Weight
8,631 lb / 3,915 kg
Power Measured @
2,300 rpm
Relief Valve Pressure
3,050 psi / 210.3 bar
Tipping Angle
4,900.90 deg
Hydraulics
Pump Flow Capacity
22 gal/min / 83.3 L/min
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case 450 Series III engine? +
The CASE Construction Equipment Case 450 Series III produces 90 hp (67.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the CASE Construction Equipment Case 450 Series III compare to similar Skid Steer Loader models? +
You can compare the CASE Construction Equipment Case 450 Series III side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.