Overview
The CASE Construction Equipment Case SR130 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 43 hp, capacity of 0.5 yd³, fuel capacity of 16.0 gal and hydraulic capacity of 4.0 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case SR130 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
43
hp
Gross Power
46
hp
Bucket Capacity
0.50
yd3
Full Specifications
32 specs
Dimensions
Bucket Width
60 in / 1,524 mm
Clearance At Max Lift And Dump
7.39 ft / 2.25 m
Ground Clearance
7 ft / 2.13 m
Height to Top of Cab
6.30 ft / 1.92 m
Length W/O Bucket
8.01 ft / 2.44 m
Length With Bucket
9.95 ft / 3.03 m
Reach At Max Lift And Dump
18.50 ft / 5.64 m
Turning Radius From Center - Inc Bucket
75.60 ft / 23.04 m
Turning Radius From Center - Machine Rear
56.40 ft / 17.19 m
Wheelbase
3.09 ft / 0.94 m
Width Over Tires
4.99 ft / 1.52 m
Engine
Alternator Supplied Amperage
120 A
Bucket Capacity
0.50 yd³ / 0.38 m³
Chain Box Fluid Capacity - Each Side
1.70 gal / 6.4 L
Displacement
122 cu in / 2.0 L
Engine Model
ISM N844T/M3
Engine Oil Fluid Capacity
2 gal / 7.6 L
Fuel Capacity
16 gal / 60.6 L
Gross Power
46 hp / 34.3 kW
Hydraulic System Fluid Capacity
4 gal / 15.1 L
Max Torque
96 lb-ft / 131 Nm
Net Power
43 hp / 32.1 kW
Number of Cylinders
4
Operating Load Rating
1,300 lb / 590 kg
Operating Speed
6.70 mph / 10.8 km/h
Operating Voltage
12 V
Operational Weight
5,000 lb / 2,268 kg
Power Measured @
2,900 rpm
Relief Valve Pressure
3,000 psi / 206.8 bar
Tipping Angle
2,600 deg
Torque Measured @
1,750 rpm
Hydraulics
Pump Flow Capacity
15.60 gal/min / 59.1 L/min
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case SR130 engine? +
The CASE Construction Equipment Case SR130 produces 46 hp (34.3 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the CASE Construction Equipment Case SR130 compare to similar Skid Steer Loader models? +
You can compare the CASE Construction Equipment Case SR130 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.