Overview
The CASE Construction Equipment Case SR175 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 57 hp, capacity of 0.6 yd³, travel speed of 11.5 mph, fuel capacity of 20.0 gal and hydraulic capacity of 5.3 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case SR175 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
57
hp
Gross Power
60
hp
Bucket Capacity
0.60
yd3
Full Specifications
33 specs
Dimensions
Bucket Width
66 in / 1,676 mm
Clearance At Max Lift And Dump
8.11 ft / 2.47 m
Ground Clearance
7 ft / 2.13 m
Height to Top of Cab
6.47 ft / 1.97 m
Length W/O Bucket
8.83 ft / 2.69 m
Length With Bucket
10.83 ft / 3.30 m
Reach At Max Lift And Dump
21.30 ft / 6.49 m
Turning Radius From Center - Inc Bucket
78.41 ft / 23.90 m
Turning Radius From Center - Machine Rear
62.90 ft / 19.17 m
Wheelbase
3.71 ft / 1.13 m
Width Over Tires
5.35 ft / 1.63 m
Engine
Alternator Supplied Amperage
95 A
Bucket Capacity
0.60 yd³ / 0.46 m³
Chain Box Fluid Capacity - Each Side
1.80 gal / 6.8 L
Displacement
135 cu in / 2.2 L
Engine Model
ISM N844T/M3
Engine Oil Fluid Capacity
2.30 gal / 8.7 L
Fuel Capacity
20 gal / 75.7 L
Gross Power
60 hp / 44.7 kW
Hydraulic System Fluid Capacity
5.30 gal / 20.1 L
Max Speed
11.50 mph / 18.5 km/h
Max Torque
126 lb-ft / 171 Nm
Net Power
57 hp / 42.5 kW
Number of Cylinders
4
Operating Load Rating
1,750 lb / 794 kg
Operating Speed
7.40 mph / 11.9 km/h
Operating Voltage
12 V
Operational Weight
6,200 lb / 2,812 kg
Power Measured @
2,900 rpm
Relief Valve Pressure
3,000 psi / 206.8 bar
Tipping Angle
3,500 deg
Torque Measured @
1,800 rpm
Hydraulics
Pump Flow Capacity
9.60 gal/min / 36.3 L/min
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case SR175 engine? +
The CASE Construction Equipment Case SR175 produces 60 hp (44.7 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the CASE Construction Equipment Case SR175 compare to similar Skid Steer Loader models? +
You can compare the CASE Construction Equipment Case SR175 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.