Overview
The CASE Construction Equipment Case SV250 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 76 hp, capacity of 0.7 yd³, travel speed of 11.9 mph, fuel capacity of 25.5 gal and hydraulic capacity of 6.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the CASE Construction Equipment Case SV250 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Net Power
76
hp
Gross Power
82
hp
Bucket Capacity
0.70
yd3
Full Specifications
34 specs
Dimensions
Bucket Width
72 in / 1,829 mm
Clearance At Max Lift And Dump
8.54 ft / 2.60 m
Ground Clearance
8 ft / 2.44 m
Height to Top of Cab
6.57 ft / 2.00 m
Length W/O Bucket
9.85 ft / 3.00 m
Length With Bucket
11.82 ft / 3.60 m
Reach At Max Lift And Dump
29.30 ft / 8.93 m
Turning Radius From Center - Inc Bucket
83.80 ft / 25.54 m
Turning Radius From Center - Machine Rear
70.41 ft / 21.46 m
Wheelbase
4.27 ft / 1.30 m
Width Over Tires
5.58 ft / 1.70 m
Engine
Alternator Supplied Amperage
95 A
Bucket Capacity
0.70 yd³ / 0.54 m³
Chain Box Fluid Capacity - Each Side
2 gal / 7.6 L
Displacement
195 cu in / 3.2 L
Engine Make
2239
Engine Model
432T/M3
Engine Oil Fluid Capacity
2.70 gal / 10.2 L
Fuel Capacity
25.50 gal / 96.5 L
Gross Power
82 hp / 61.1 kW
Hydraulic System Fluid Capacity
6.10 gal / 23.1 L
Max Speed
11.90 mph / 19.2 km/h
Max Torque
225 lb-ft / 305 Nm
Net Power
76 hp / 56.7 kW
Number of Cylinders
4
Operating Load Rating
2,500 lb / 1,134 kg
Operating Speed
7.20 mph / 11.6 km/h
Operating Voltage
12 V
Operational Weight
8,000 lb / 3,629 kg
Power Measured @
2,500 rpm
Relief Valve Pressure
3,000 psi / 206.8 bar
Tipping Angle
5,000 deg
Torque Measured @
1,400 rpm
Hydraulics
Pump Flow Capacity
12.20 gal/min / 46.2 L/min
Frequently Asked Questions
How powerful is the CASE Construction Equipment Case SV250 engine? +
The CASE Construction Equipment Case SV250 produces 82 hp (61.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the CASE Construction Equipment Case SV250 compare to similar Skid Steer Loader models? +
You can compare the CASE Construction Equipment Case SV250 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.