Overview
The Caterpillar 216 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 49.7 hp, operating weight of 5,490 lb, capacity of 0.5 yd³, travel speed of 7.0 mph, fuel capacity of 17.2 gal and hydraulic capacity of 14.6 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 216 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
5,490
lb
Net Power
49.70
hp
Gross Power
51
hp
Bucket Capacity
0.50
yd3
Full Specifications
56 specs
Dimensions
Bucket Pin Height - Carry Position
9.31 ft / 2.84 m
Bucket Pin Height - Maximum Lift
9.37 ft / 2.86 m
Bumper Overhang - Rear Axle
38 lb / 17 kg
Clearance At Max Lift And Dump
7.12 ft / 2.17 m
Clearance At Maximum Lift And Dump
85.40 ft / 26.03 m
Ground Clearance
7.70 ft / 2.35 m
Height - Top Of Cab
6.42 ft / 1.96 m
Height to Top of Cab
6.40 ft / 1.95 m
Length - With Bucket On Ground
127 in / 3,226 mm
Length - Without Bucket
99 in / 2,515 mm
Length W/O Bucket
8.27 ft / 2.52 m
Length With Bucket
10.88 ft / 3.32 m
Maximum Overall Height
146 in / 3,708 mm
Reach - Maximum Lift/Dump
20 ft / 6.10 m
Reach At Max Lift And Dump
21.50 ft / 6.55 m
Turning Radius From Center - Inc Bucket
79.38 ft / 24.20 m
Vehicle Width Over Tires
60 in / 1,524 mm
Wheel Base
3.24 in / 82 mm
Wheelbase
3.24 ft / 0.99 m
Width Over Tires
6.01 ft / 1.83 m
Engine
Bore
3.40 in / 86 mm
Bucket Capacity
0.50 yd³ / 0.38 m³
Displacement
134 cu in / 2.2 L
Engine Make
2236
Engine Model
3024C
Fuel Capacity
17.20 gal / 65.1 L
Fuel Tank
17 gal / 64.4 L
Gross Power
51 hp / 38.0 kW
Hydraulic System Fluid Capacity
14.60 gal / 55.3 L
Hydraulic Tank
9.20 gal / 34.8 L
Max Speed
7 mph / 11.3 km/h
Net Flywheel Power
48 hp / 35.8 kW
Net Power
48 hp / 35.8 kW
Number of Cylinders
4
Operating Load Rating
1,400 lb / 635 kg
Operating Speed
7 mph / 11.3 km/h
Operating Weight
5,490 lb / 2,490 kg
Operational Weight
5,740 lb / 2,604 kg
Power Measured @
3,000 rpm
Stroke
4 in / 102 mm
Tipping Angle
2,600 deg
Hydraulics
Chain Box - Each Side
1.60
Fops
SAEJ/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii
SAEJ/ISO 3449 APR 98 Level II and ISO 3449:1992 Level II (optional)
Loader Hydraulic Flow
14.70 gal/min / 55.6 L/min
Loader Hydraulic Pressure
3,100 psi / 213.7 bar
Net Power
50 hp / 37.1 kW
Pump Flow Capacity
15.20 gal/min / 57.5 L/min
Rops
SAE J1040 MAY94 and ISO3471:1994
Other
Breakout Force - Lift Cylinder
2,873 lb / 1,303 kg
Breakout Force - Tilt Cylinder
3,612 lb / 1,638 kg
Rated Operating Capacity
1,400 lb / 635 kg
Rated Operating Capacity With Optional Counterweight
1,500 lb / 680 kg
Tipping Load
2,800 lb / 1,270 kg
Cooling System
2.40 gal / 9.1 L
Engine Crankcase
2.10 gal / 7.9 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 216? +
The Caterpillar 216 has an operating weight of 5,490 lb (2,490 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 216 engine? +
The Caterpillar 216 produces 51 hp (38.0 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 216 compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 216 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.