Overview
The Caterpillar 236D is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 74 hp, operating weight of 6,559 lb, travel speed of 10.6 mph, fuel capacity of 27.7 gal and hydraulic capacity of 13.2 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 236D against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
6,559
lb
Gross Power
74.30
hp
Full Specifications
70 specs
Dimensions
Breakout Force
5,074 lb / 2,302 kg
Bucket Pin Height - Carry Position
7.50 ft / 2.29 m
Bucket Pin Height - Maximum Lift
10.25 ft / 3.12 m
Bumper Overhang - Behind Rear Axle
40 lb / 18 kg
Clearance At Max Lift And Dump
7.75 ft / 2.36 m
Clearance At Maximum Lift And Dump
92.90 ft / 28.32 m
Ground Clearance
7.70 ft / 2.35 m
Height - Top Of Cab
6.84 ft / 2.08 m
Height to Top of Cab
6.83 ft / 2.08 m
Length - With Bucket On Ground
137.31 in / 3,488 mm
Length - Without Bucket
108.90 in / 2,766 mm
Length W/O Bucket
9.08 ft / 2.77 m
Length With Bucket
11.45 ft / 3.49 m
Maximum Overall Height
156.60 in / 3,978 mm
Maximum Reach - With Arms Parallel To Ground
53.30 ft / 16.25 m
Reach - Maximum Lift/Dump
16 ft / 4.88 m
Reach At Max Lift And Dump
16 ft / 4.88 m
Turn Radius From Center - Bucket
83 ft / 25.30 m
Turn Radius From Center - Coupler
51.80 ft / 15.79 m
Turn Radius From Center - Machine Rear
64.50 ft / 19.66 m
Turning Radius From Center - Inc Bucket
85.24 ft / 25.98 m
Vehicle Width Over Tires
66 in / 1,676 mm
Wheel Base
3.63 in / 92 mm
Wheelbase
3.63 ft / 1.11 m
Width Over Tires
5.50 ft / 1.68 m
Engine
Bore
3.70 in / 94 mm
Chain Box Fluid Capacity - Each Side
2.30 gal / 8.7 L
Cooling System Fluid Capacity
3.70 gal / 14.0 L
Displacement
203 cu in / 3.3 L
Engine Make
2236
Engine Model
Cat 3.3B DIT (Turbo)
Fuel Capacity
27.70 gal / 104.9 L
Fuel Tank
27.70 gal / 104.9 L
Gross Power
74 hp / 55.4 kW
Gross Power - Sae J1995
74 hp / 55.4 kW
Hydraulic System Fluid Capacity
13.20 gal / 50.0 L
Hydraulic Tank
10.30 gal / 39.0 L
Max Speed
10.60 mph / 17.1 km/h
Net Flywheel Power
73 hp / 54.6 kW
Net Power - Iso 9249
74 hp / 55.1 kW
Net Power - Sae 1349
73 hp / 54.6 kW
Operating Speed
7 mph / 11.3 km/h
Operating Weight
6,559 lb / 2,975 kg
Operational Weight
6,559 lb / 2,975 kg
Peak Torque - 1,500 Rpm - Sae J1995
195 lb-ft / 264 Nm
Relief Valve Pressure
3,335 psi / 229.9 bar
Stroke
4.70 in / 119 mm
Tipping Angle
3,600 deg
Travel Speed - Forward Or Reverse - One Speed
7 mph / 11.3 km/h
Travel Speed - Forward Or Reverse - Two Speed Option
10.60 mph / 17.1 km/h
Hydraulics
Chain Box - Each Side
2.30
Fops
ISO 3449:2005 Level I
Fops Level Ii
ISO 3449:2005 Level II
Hydraulic Flow - High Flow - Hydraulic Power (Calculated)
58 gal/min / 219.6 L/min
Hydraulic Flow - High Flow - Loader Hydraulic Flow
30 gal/min / 113.6 L/min
Hydraulic Flow - High Flow - Loader Hydraulic Pressure
3,335 psi / 229.9 bar
Hydraulic Flow - Standard - Hydraulic Power (Calculated)
39 gal/min / 147.6 L/min
Hydraulic Flow - Standard - Loader Hydraulic Flow
20 gal/min / 75.7 L/min
Hydraulic Flow - Standard - Loader Hydraulic Pressure
3,335 psi / 229.9 bar
Inside Cab*
83
Note (2)
*The declared dynamic operator sound pressure levels per ISO 6396:2008. The measurements were conducted with the cab doors and windows closed and at 70% of the maximum engine cooling fan speed. The so
Outside Cab**
101
Pump Flow Capacity
20 gal/min / 75.7 L/min
Rops
ISO 3471:2008
Other
Breakout Force - Tilt Cylinder
5,074 lb / 2,302 kg
Rated Operating Capacity
1,800 lb / 816 kg
Rated Operating Capacity With Optional Counterweight
2,000 lb / 907 kg
Tipping Load
3,600 lb / 1,633 kg
Cooling System
3.70 gal / 14.0 L
Engine Crankcase
3 gal / 11.4 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 236D? +
The Caterpillar 236D has an operating weight of 6,559 lb (2,975 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 236D engine? +
The Caterpillar 236D produces 74 hp (55.4 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 236D compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 236D side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.