Overview
The Caterpillar 268B is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 79.2 hp, operating weight of 7,995 lb, travel speed of 7.3 mph, fuel capacity of 23.8 gal and hydraulic capacity of 14.1 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 268B against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
7,995
lb
Net Power
79.20
hp
Gross Power
82
hp
Full Specifications
77 specs
Dimensions
Breakout Force
5,507 lb / 2,498 kg
Bucket Pin Height - Carry Position
8.40 ft / 2.56 m
Bucket Pin Height - Maximum Lift
10.59 ft / 3.23 m
Bucket Pin Reach - Maximum Lift
13.60 ft / 4.15 m
Bumper Overhang - Rear Axle
41 lb / 19 kg
Clearance At Max Lift And Dump
7.95 ft / 2.42 m
Clearance At Maximum Lift And Dump
95 ft / 28.96 m
Ground Clearance
8 ft / 2.44 m
Height - Top Of Cab
6.92 ft / 2.11 m
Height to Top of Cab
6.77 ft / 2.06 m
Length - With Bucket On Ground
142 in / 3,607 mm
Length - Without Bucket
114 in / 2,896 mm
Length W/O Bucket
9.53 ft / 2.90 m
Length With Bucket
11.87 ft / 3.62 m
Maximum Overall Height
160 in / 4,064 mm
Maximum Reach - With Arms Parallel
52 ft / 15.85 m
Reach - Maximum Lift/Dump
33 ft / 10.06 m
Reach At Max Lift And Dump
32.64 ft / 9.95 m
Turn Radius From Center - Bucket
86 ft / 26.21 m
Turn Radius From Center - Coupler
52 ft / 15.85 m
Turn Radius From Center - Rear
67 ft / 20.42 m
Turning Radius From Center - Inc Bucket
85.83 ft / 26.16 m
Turning Radius From Center - Machine Rear
66.78 ft / 20.35 m
Vehicle Width Over Tires
72 in / 1,829 mm
Wheel Base
4 in / 102 mm
Wheelbase
4.03 ft / 1.23 m
Width Over Tires
6.01 ft / 1.83 m
Engine
Alternator Supplied Amperage
90 A
Bore
3.70 in / 94 mm
Cat 3044C DIT
Engine Power - Iso 14396
Chain Box Fluid Capacity - Each Side
2.20 gal / 8.3 L
Cooling System Fluid Capacity
2.70 gal / 10.2 L
Engine Make
2236
Engine Model
3044C DIT
Engine Oil Fluid Capacity
2.70 gal / 10.2 L
Engine Power - Iso 14396
80 hp / 59.7 kW
Fuel Capacity
23.80 gal / 90.1 L
Fuel Tank
23.80 gal / 90.1 L
Gross Power
82 hp / 61.1 kW
Gross Power - Sae J1995
82 hp / 61.1 kW
Hydraulic System Fluid Capacity
14.10 gal / 53.4 L
Hydraulic Tank
9.20 gal / 34.8 L
Max Speed
7.30 mph / 11.7 km/h
Net Flywheel Power
76 hp / 56.7 kW
Net Power
77 hp / 57.0 kW
Net Power - Eec 80/1269
77 hp / 57.4 kW
Net Power - Iso 9249 Eec
77 hp / 57.4 kW
Net Power - Sae 1349
76 hp / 56.7 kW
Operating Load Rating
2,699 lb / 1,224 kg
Operating Voltage
12 V
Operating Weight
7,995 lb / 3,626 kg
Operational Weight
7,994 lb / 3,626 kg
Relief Valve Pressure
4,061 psi / 280.0 bar
Stroke
4.70 in / 119 mm
Tipping Angle
5,399.20 deg
Travel Speed Forward
7.20 mph / 11.6 km/h
Travel Speed Forward - 2-Speed Option
11 mph / 17.7 km/h
Travel Speed Reverse
7.20 mph / 11.6 km/h
Travel Speed Reverse - 2-Speed Option
11 mph / 17.7 km/h
Hydraulics
Chain Box - Each Side
2.10
Fops
SAE J/ISO 3449 APR98 Level I and ISO3449:1992 Level I
Fops Level Ii
SAE J/ISO 3449 APR98 Level II and ISO 3449:1992 Level II (optional)
Hydraulic Power
78 hp / 58.3 kW
Loader Hydraulic Flow
33.02 gal/min / 125.0 L/min
Loader Hydraulic Pressure
4,061 psi / 280.0 bar
Maximum Loader Hydraulic Flow
33 gal/min / 124.9 L/min
Maximum Loader Hydraulic Pressure
4,060 psi / 279.9 bar
Net Power
79 hp / 59.1 kW
Pump Flow Capacity
33.10 gal/min / 125.3 L/min
Rops
SAE J1040 MAY94 and ISO3471:1994
Other
Breakout Force - Lift Cylinder
5,192 lb / 2,355 kg
Breakout Force - Tilt Cylinder
5,508 lb / 2,498 kg
Rated Operating Capacity
2,700 lb / 1,225 kg
Rated Operating Capacity With Optional Counterweight
2,750 lb / 1,247 kg
Tipping Load
5,613 lb / 2,546 kg
Cooling System
2.60 gal / 9.8 L
Engine Crankcase
2.60 gal / 9.8 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 268B? +
The Caterpillar 268B has an operating weight of 7,995 lb (3,626 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 268B engine? +
The Caterpillar 268B produces 82 hp (61.1 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 268B compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 268B side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.