Overview
The Caterpillar 242B Series 2 is a skid steer loader listed in the Heavy Equipment Hub equipment database with structured specifications for comparison, research, and machine selection. Key specification points include engine power of 56 hp, operating weight of 6,914 lb, capacity of 0.5 yd³, travel speed of 6.8 mph, fuel capacity of 15.3 gal and hydraulic capacity of 14.5 gal. This model can be reviewed for equipment comparison, jobsite planning, fleet research, and specification-based machine selection. Use the full specifications table to compare the Caterpillar 242B Series 2 against similar skid steer loader models by power, weight, capacity, dimensions, speed, and other technical values.
Key Specifications
Operating Weight
6,914
lb
Net Power
56
hp
Gross Power
61
hp
Bucket Capacity
0.50
yd3
Full Specifications
73 specs
Dimensions
Breakout Force
4,060 lb / 1,842 kg
Bucket Pin Height - Carry Position
11.80 ft / 3.60 m
Bucket Pin Height - Maximum Lift
10 ft / 3.05 m
Bucket Pin Reach - Maximum Lift
11.20 ft / 3.41 m
Bumper Overhang - Rear Axle
39 lb / 18 kg
Clearance At Max Lift And Dump
7.33 ft / 2.23 m
Clearance At Maximum Lift And Dump
88 ft / 26.82 m
Ground Clearance
7 ft / 2.13 m
Height - Top Of Cab
6.50 ft / 1.98 m
Height to Top of Cab
6.50 ft / 1.98 m
Length - With Bucket On Ground
135.31 in / 3,437 mm
Length - Without Bucket
108.70 in / 2,761 mm
Length W/O Bucket
9.06 ft / 2.76 m
Length With Bucket
11.28 ft / 3.44 m
Maximum Overall Height
154.60 in / 3,927 mm
Maximum Reach - With Arms Parallel
48.40 ft / 14.75 m
Reach - Maximum Lift/Dump
30.20 ft / 9.20 m
Reach At Max Lift And Dump
30.20 ft / 9.20 m
Turn Radius From Center - Bucket
87.40 ft / 26.64 m
Turn Radius From Center - Coupler
56.50 ft / 17.22 m
Turn Radius From Center - Rear
60.80 ft / 18.53 m
Turning Radius From Center - Inc Bucket
87.40 ft / 26.64 m
Turning Radius From Center - Machine Rear
60.80 ft / 18.53 m
Vehicle Width Over Tires
66 in / 1,676 mm
Wheel Base
3.60 in / 91 mm
Wheelbase
3.59 ft / 1.09 m
Width Over Tires
5.50 ft / 1.68 m
Engine
Alternator Supplied Amperage
85 A
Bore
3.30 in / 84 mm
Bucket Capacity
0.50 yd³ / 0.38 m³
Chain Box Fluid Capacity - Each Side
1.60 gal / 6.1 L
Cooling System Fluid Capacity
2.60 gal / 9.8 L
Displacement
134 cu in / 2.2 L
Engine Make
2236
Engine Model
3024C T
Engine Oil Fluid Capacity
2.60 gal / 9.8 L
Fuel Capacity
15.30 gal / 57.9 L
Fuel Tank
15.30 gal / 57.9 L
Gross Power
61 hp / 45.5 kW
Gross Power - Sae J1995
61 hp / 45.5 kW
Hydraulic System Fluid Capacity
14.50 gal / 54.9 L
Hydraulic Tank
9.20 gal / 34.8 L
Max Speed
6.80 mph / 10.9 km/h
Net Flywheel Power
56 hp / 41.8 kW
Net Power
57 hp / 42.5 kW
Net Power - Sae 1349
56 hp / 41.8 kW
Number of Cylinders
4
Operating Load Rating
2,100 lb / 953 kg
Operating Voltage
12 V
Operating Weight
6,914 lb / 3,136 kg
Operational Weight
6,914 lb / 3,136 kg
Power Measured @
2,600 rpm
Relief Valve Pressure
3,335 psi / 229.9 bar
Stroke
3.90 in / 99 mm
Tipping Angle
4,200 deg
Travel Speed Forward
6.80 mph / 10.9 km/h
Travel Speed Reverse
6.80 mph / 10.9 km/h
Hydraulics
Chain Box - Each Side
1.60
Fops
SAE J1043 SEPT87, ISO 3449:1992 Level I
Fops Level Ii
SAE J231 JAN81, ISO 3449:1992 Level II
Hydraulic Power
30 hp / 22.7 kW
Loader Hydraulic Flow
15.60 gal/min / 59.1 L/min
Loader Hydraulic Pressure
3,335 psi / 229.9 bar
Maximum Loader Hydraulic Flow
26 gal/min / 98.4 L/min
Maximum Loader Hydraulic Pressure
3,335 psi / 229.9 bar
Net Power
56 hp / 41.8 kW
Pump Flow Capacity
15.60 gal/min / 59.1 L/min
Rops
SAE J1040 MAY94, ISO 3471:1994
Other
Breakout Force - Tilt Cylinder
4,060 lb / 1,842 kg
Rated Operating Capacity
2,100 lb / 953 kg
Tipping Load
4,200 lb / 1,905 kg
Cooling System
2.60 gal / 9.8 L
Engine Crankcase
2.60 gal / 9.8 L
Frequently Asked Questions
What is the operating weight of the Caterpillar 242B Series 2? +
The Caterpillar 242B Series 2 has an operating weight of 6,914 lb (3,136 kg). This places it in a class suited for skid steer loader applications where ground pressure and transport weight are key considerations.
How powerful is the Caterpillar 242B Series 2 engine? +
The Caterpillar 242B Series 2 produces 61 hp (45.5 kW) of engine power. This output is typical for its weight class and designed to handle demanding Skid Steer Loader work cycles efficiently.
How does the Caterpillar 242B Series 2 compare to similar Skid Steer Loader models? +
You can compare the Caterpillar 242B Series 2 side by side with any other model using the Heavy Equipment Hub compare tool. Key comparison points include engine power, operating weight, digging depth, hydraulic flow, and overall dimensions.